Touchscreen technology and devices that use that technology have become widely popular over the past few years. Even so, very small amount of people knows that there are different technologies implemented in those devices that they use in everyday life. Through this seminar, we would try to present the different solutions currently available on the market.Simultaneously, we will compare between those solutions, emphasizing on differences between those technologies, and making the differences between them more obvious and understandable. Later, we will give our opinions on market trends in the future, and our vision and conclusion about this topic. full topic: http://www.slideshare.net/mshirif/touch-screen-technologies

1. Touch Screens technologies
Mohammed AL-Shirif
Eng. MohedeenAwad

2. Outlines:
1.Introduction.
2.Types of the touch screen.
3.Resistive technology
4.Capacitive Technology.
5.SAW technology.
6.Infrared Technology
7.Market Trends
8.What is next?

3. 1. Introduction:
Intuitive
Input/output Devices.
No skills are required.
No additional hardware.
Sensor+controller+software

4. 2. Types of the touch screens:
4 main types.
No type is always the Best.

5. 3.Resistive Technology:
Pressure sensitive.
voltage travel across 2 sheets.
X-sheet and Y-sheet.
isolating dots.
touch is a switch closing the circuit

6. 3. Resistive >> Pros & Cons:
Low Cost
Finger or any stylus.
Low Durability.
Low Clarity (75%).

7. 4. Capacitive Technology:
Rely on electricity of your body.
X-Electrodes & Y-Electrodes
grid of Capacitors is formed.
Your body is a capacitor.
Touch is a change in
capacitance.

8. 4. Capacitive >> Pros & Cons:
Multi-Touch
Good clarity (90%)
Low scratch immunity.
Only Finger.
COMMERCIAL MARKET: The iPhone

9. 5. SAW Technology:
uses ultrasonic waves.
4 transducers (converter).
Electrical / Ultrasonic.
comparing with a
Stored reference signal
Touch is a wave
attenuation

10. 5. SAW >> Pros & Cons:
High clarity (99%)
High scratch immunity
Low weather immunity
can be activated inadvertently by dirt

11. 6. Infrared Technology:
based on light-beam interruption.
a frame surrounds the display
X-LEDs and Y-LEDs.
Photo sensor for X and Y

12. 6. Infrared >> Pros & Cons:
Excellent clarity
Very durable.
suitable for large-sizes
Very expensive.
Low performance in sunlight.

13. 7. Market Trends: 2013
Resistive is shrinking
1.75 billion units in 2013.
Up 17.2% on year.
40% of mobile phones use hhhhhhtouchscreens
The leading technology is kkkprojected capacitive

14. 7. Market Trends >>
Fast growth

15. 8. What is next?
The market will double by 2017
Next market is touch
Large displays.
Touch screen projector

16. Thank You
Q&A
MHSH2025@GMAIL.COM