powerpoint

1. Perform Mensuration and
Calculation
At the end of the lesson, you are
expected to:
LO1. Select measuring instrument
LO2. Carry out measurement and calculations

2. Area – extent of part of a surface enclosed within a boundary
Calculation – the act or process of or result of calculating
Circumference – distance around the circle
 Classification – group or category within an organized system
Decimal – number expressed in a counting system that uses units of 10,
especially a decimal fraction
Definition of Terms

3.  Dimension - measurable extent such as length, thickness and width
Fraction - number expressed as a quotient of two other numbers
Geometric Shapes – characterized by straight line, regular curves and
angles
Graduation – scale of a measuring tool
Mensuration – act or art of measuring
Definition of Terms

4. • Perimeter – bounding line or curve of a plain area
• Standard – serves as a measure of reference
• Stock – refers to a lumber for a certain furniture job
• Substrate – wood to be cut in a cutting machine
• Volume – space inside a solid figure
Definition of Terms

5. LEARNING OUTCOME 1
Select measuring
instruments

6. What Do You
Already Know?

7. Identify the different measuring tools
Pull-push rule Zig zag rule
Ruler
Caliper
Try square

8. Types of Measuring Tools
1. Pull push rule 7. Divider
2. Zig zag rule 8. Compass
3. Ruler 9. Protractor
4. Caliper
5. Try square
6. Meter stick

9. 1. Pull-push rule
– used for
measuring long
pieces of stock.

10. 2. Zig Zag Rule
– a folded
measuring tool.

11. 3. Ruler
– used for
measuring
short pieces of
stock.

12. 4. Caliper
– used for
measuring
diameter

13. 5. Try Square
– used for
checking
flatness and
squareness.

14. 6. Meter Stick
– a measuring
device which is
one (1) meter in
length.

15. 7. Divider – used
for dividing
distances.

16. 8. Compass
– used for scribing
arcs and circles.

17. 9. Protractor
– used for laying
out angles.