This document provides instructions for applying SNS Gelous Color to natural nails in 5 steps:
1. Prepare the nails by shaping, pushing back cuticles, and buffing. Apply E.A. Bond and Gelous Base.
2. Apply Gelous Base and dip nail in Gelous Color, tapping off excess powder. Repeat for all nails.
3. Apply Gelous Base and dip in Natural Set Sheer, then apply Sealer, repeating the process twice.
4. Finish by shaping, buffing, applying Sealer Dry and Gel Top coat. Massage hands with Vitamin Oil.
Ensure the security of your HCL environment by applying the Zero Trust princi...
SNS Gelous color real nail
1. SNS Gelous Color on Natural Nail
Preparation Steps
Always sanitize your customers hands with 100% Alcohol,
as well as your own hands, before preforming any service.
Gelous Color, Natural Set Sheer,
E.A. Bond, Gelous Base, Sealer
Dry, Gel Top, Vitamin Oil
Items Needed
2. Shape all 10 nails.
Push back the cuticles (if cuticle
remover is used, client must wash their
hands before step 3).
Step 1
Step 2
3. Buffer all 10 Nails.
Apply E.A. Bond to all 10 nails (use a
napkin to dry them well before applying
the Gelous Base application).
Step 3
Step 4
4. 1. Watch DVD well for the: Gelous Base technique application, if not
the color will miss the cuticle area.
Notice:
5. Apply Gelous Base on the entire nail.
Then dip in the Gelous Color and tap access
powder off. Repeat this step for all 10
nails.
Step 1
Step 2
Dipping Powder Steps
6. Apply thin coat of Gelous Base then dip in
Natural Set Sheer, repeat for all 10 nails
then apply Sealer for all 10 nails.
Step 4
Step 3
Dust free all 10 nails by acrylic brush
then repeat steps 1 & 2 for second layer.
7. 1. When using Gel Top and Base, avoid the cuticles or it may cause lifting
problems.
2. To avoid chipping at the tip, apply sealer underneath the nails then apply
very thin coat of Gel Top to protect from water, which causes chipping.
Notice:
8. Shape all 10 nails* (may use the nail
machine with fine paper sander around
the cuticle and use with slow speed, in
case the nail plate is waving).
Buff all 10 nails and wash the hands.
Step 1
Step 2
Finishing Steps
9. Apply Sealer Dry to all 10 nails, and then
wipe them off with a paper towel.
Step 3
Apply the first coat of Gel Top quickly
and as thin as possible for five nails,
and then reapply the second coat in
the same way. Repeat the same on the
second hand.
Step 4
10. Wait for 1 to 2 minutes. Apply SNS Vitamin
Oil and massage the hands to finish.
Step 5
1. Apply Gel Top, quick and very thin or it may cause nail to not dry
and the brush get hard.
2. After each client, always sanitize your brush with 100% alcohol
and dry well.
Notice: