1. RAMACHANDRAPC
#40,1st Main,2nd Cross, E-mail: pc.ramachandra@gmail.com,
NeelakanteshwaraExtn, Mangammanapalya, ramachandraparlapalli@gmail.com
Bommanahalli,Bangalore-560068 Mobile:+91-8892147159
OBJECTIVE:
 Seeking a dynamic environment where there is every scope to gain and share the knowledge
 To have a long term association withthe organization to gain experience, assisting me in career
advancement.
Professional Experience Summary:
Working as Software Development Engineer from March 2014 in CARAVEL INFO SYSTEMS and
Deputed to Aeronautical Development Establishment (ADE-DRDO) Bangalore.
SKILL SUMMARY:
 Total experience of 1.6 years in Avionics Testing and Development.
 Exposure in Real time embedded application software in assembly / C / C++.
 Experience in complete product cycle of Software Development right from Board bring-up,
monitor programs, programming of boot loaders, Test Plan, Unit test setup and Execution.
 Experienced in preparation of Acceptance Test Procedure & Report.
 Ability to perform independent Test & Measurement activities using Oscilloscope, Power
Supply, Multimeter, Logic Analyzer, Power Analyzer etc
 Knowledge of MIL-STD-1553
 Knowledge in Software Development Life cycle(SDLC) Modules.
 Ability to work well as a part of Project team
Technical Skills
Programming Languages: Embedded C, C & Data Structures, C++, VC++
Assembly Languages: Intel 8085, 8086,8096, 8051 ASM,MPC-5566 µC.
Communication Protocols: CAN, I2C, MIL STD 1553B,UART, SPI, RS232, RS422, RS485, Ethernet, AXI.
IDE Tools: MCU IDEs : MULTI,Code Warrior V8.2.3, Keil µ-vision 4,
VC++ IDEs: Microsoft Visual C++ 6.0
Operating Systems: MS-DOS, Windows XP/7/8.

2. Educational Qualifications:
Examination Institute/University Year of
passing
Percentage
Matriculation Z.P.H(B)school, Yemmiganur, Kurnool 2006 66.67%
Intermediate/+2 Sanjeevi Junior college, Yemmiganur, Kurnool 2008 74.40%
BE (E & C) KITE Engineering College/JNTUH,Hyderabad 2012 72.15%
Projects
Following are the details of the projects carried out at ADE, DRDO, Bangalore
Project: Digital FlightControl Computer(DFCCMk2)forLCA-TEJAS
Role: Development & testing of the
Tools: MULTI,U-Boot, AITES, Microsoft Visual studio.
Description: DFCC is part of digital fly by wire Flight Control System (FCS).DFCC is has four
identical channels, each channel contains three analog cards, one digital card,
one power supply card .The DFCC digital module is the core of the DFCC unit &
it consists of a main computing unit for control law & redundancy
management, & MIL-STD-1553B, & RS422 interfaces to different subsystems
like Air Data Transducers, Get-U-Home panel, Flight Test Panel, Crash Data
Recorder etc. All hardware interfaces of Digital card, Analog card and power
supply cards are accessed by the software in MPC5566 by read/write to a
valid address.
Responsibilities:
 Development of Basic Boot Code for MPC5566
 Development of processor boot up modules.
 Peripheral configuration and initialization
 Schemes evaluation (Boot fromInternal/External Flash, Enable/Disable Cache etc) for
optimal access
 Involved in ATE development for SRU & LRU testing of DFCC Mk2
 Configuring test cases and involved in developing test methodologies for SRU and LRU
level for DFCC.
 Self-test code for all the interfaces
 Developed built in self test forall the interfaces in digital module. This codeis to be used
for evaluation and performance checkduring development and qualification. Self test are
written in such a way to provide maximum coveragewith minimum user interaction or
setting
 System Integration Testing of DFCC MK1 & MK2 used in TEJAS LCA
 Configuring test cases and involvedin developing test methodologies forLRU level for
DFCC. Developed minimal boot code that to be used during formal ATP(Acceptance
Testing) in AETS (AdvancedEngineering Test Station).
 At Advanced Engineering Test Station all the single DFCC with four channels are
connected together and their inter communication is tested.

3. Project: LEVCON Air Data Computer (LADC),Air Data Computer (ADC).
Role: Design &testing
Duration: 6 months
Description: The LADC is a Quadruplex LEVCON Air Data Computer and important
Hardware Configuration Item (HWCI) of the LCA FCS. The LADC will use
Primary CSCI to process the air data and outputs signals on RS-422 serial data
link to the Digital Flight Control Computer (DFCC). LADC will be interfaced to
Throttle Quadrant Assembly (TQA), Full Authority Digital Engine Control
(FADEC), LEVCON Actuation System, Arrestor Hook System and cockpit
switches.
Responsibilities:
 DEVELOPMENT OF ON-FLIGHT PROGRAM FOR ADC AND LADC
 i960 MC processor is used for performing the various computations in ADC and
LADC. The code for i960, called the On-Flight Program (OFP), is written taking care
of these needs.
 OFP performs all input data conversions like LAOA, RAOA, AOSS, TAT, RVDT, FDC
and also the diode voltages. The data is converted to a specific format suitable for
next stages of processing.
 Implemented a watch dog monitor for monitoring the health of the processor and it
assures that all the computations and conversions are performed within the
specified time interval.
 In case of processor failure, a provision is provided to dump the data at that
situation to a crash data recorder (CDR) and also NVRAM.
 DEVELOPMENT OF ADC TEST MONITOR FOR INTERACTIVE ADC/LADC TESTING
 The ADC Test Monitor software provides interactive testing of all the memory
locations of ADC and LADC. Also the EEPROM is fused with this tool.
 All ADC transducer voltage levels, diode voltage levels, Board temperature, De-icing
current level, and FDC values can be measured using this software tool.
 All interrupt tests and FIFO integrity test can be done.
 Inter ADC Communication Control (IACC) performance can be analyzed with this
tool.
 Involved in integration/debug activities of ADC at various test places (ADE, ADA,
and BEL).Few ADCs failed during Integration tests, worked towards their recovery
and setting up procedure for reliability. Towards this:
 Attended DI meetings for failed units – Problem description.
 Debugging & problem identification along with BEL engineers.
 Involved in problem rectification and retest tests at BEL.

4. Academic Projects
Project: MOBILE CONTROLLED ROBOT WITHSPEED DIRECTIONAND OBJECT
CONTROLLED
Role: Team Member/ Code Developer.
Technologies: C, MICROCONTROLLER
Description: This project describes the Designed and implemented a circuit of “GSM(SMS)
Controlled wireless Robot” is automatic robots which capable of receiving a set
of commands instructions in the form short message service and performs the
necessary actions. We will be using dedicated modem/mobile at the receiver
module i.e. with the robot it self and sends the commands using SMS service as
per the required actions
Personality traits:
 Trained First aid General, Medicine Nutrition & Medical Store Mang..As a part of SSC
VOCATIONALCourse
 Participated NATIONALCADET CORPS attend few camps.
 An activeparticipator in sports, cultural and technical events, any inter school
competitions since schooldays.
 Initiative, good leadership qualities and Quickadaptability
PERSONAL DETAILS:
Father’s name: Ramudu PC
Date of birth: 15th JUNE 1991
Nationality: Indian
Languages known: English, Telugu, Kannada, Hindi
HOBBIES: Playing Puzzle games like Sudoku, Stamp collection, gadget, Reading
spiritual & motivational content books, avid listener of songs
DECLARATION:
I hereby declare that the particulars specified in the application are true to the best of my
Knowledge and belief.
RAMACHANDRA.PC