If you've wound up with a shattered iPhone 7 digitizer here's what you need to know about repairing it. Visit PartFect Ltd and buy the best iPhone 7 Plus LCD screen and Digitizer Kit.
2. If you've wound up with a shattered iPhone 7
digitizer here's what you need to know about
repairing it.
3. The iPhone 7 Plus LCD screen and digitizer is
beautiful, to be sure — but that glass beauty can
break if dropped, smashed, or otherwise chipped
against similarly-hard surfaces. Some breaks are
worse than others, but if you completely smash your
screen, you're probably in need of a screen repair.
5. After all, modern iPhone screens aren't
just LCD and glass: They pack several
different components in one. The digitizer
reads your finger contact and movement;
the LCD displays all the images, video, and
other visual information, and the glass
screen helps shield the inner components
of the phone. When you crack your screen,
it also destroys many other things in your
iPhone such as water resistance, digitizer
iPhone.
6. There are several ways to repair or replace a
broken iPhone screen, depending on your
monetary situation and free time. Here are a
couple, in order of easiest (and cheapest) to
most complicated.
7. If your screen is shattered but relatively intact, you can
put off a potentially-costly repair by sealing the broken
pieces behind a screen protector. I'll note that this is a
temporary measure, and one I generally recommend for
screens that are cracked, but not completely destroyed —
it can keep the cracks from worsening or pieces of the
screen from falling apart, but eventually, you'll need to
replace the screen.
8. General repair guidelines
● Always use good lighting - smart device
components are small and you'll need plenty of
light to see what you are doing.
● Maintain a clean, organized workspace so you
don't lose or confuse any components.
● Group your screws so you can keep track of where
they came from. Most screws cannot be
interchanged.
● At any point during a repair, if the adhesive
becomes hard to separate, apply more heat.
● After separating adhesive, keep the housing and
screen in close proximity until flex cable is
disconnected.
9. How to replace a broken iPhone 7
Plus LCD Screen and digitizer
The iPhone 7 Plus LCD screen assembly is difficult to
remove and replace: Several flex cables can be torn
easily, so proceed carefully. In addition, loosening
the screen's adhesive requires controlled heating
with a dehydrator or heat gun.
Required tools and parts
Not only will need a new screen — an "LCD
Assembly", if you want to be technical about the part
— you're going to need some tools if you're going to
do this right. Or at all.
10. Contact Us
Address: Unit 23A, Halliwell Business Park, Rossini St.
Bolton, United Kingdom, BL18DL
Contact No: +44-1204-77-3456
Website: https://partfect.co.uk/