Highest quality shellac exporter and manufacturer - Aadhya International

1. Dewaxed Bleached Shellac
Dewaxed white shellac is used the same way as you would any
other grade of shellac. The major difference between this shellac
and the others is that it is a bit harder, shines a bit brighter, is
completely free from wax.
Bleached shellac is non-toxic, edible and used widely in different
industries including Food, food packaging and allied industries.
Bleached lac has super characteristics and qualities i.e. adhesive,
binding, hardening, gloss, odorless.
Fast drying, extending shelf life. And most clear, transparent or very light colored Alkali solutions can
be obtained from it. Bleached shellac is available in two grades: waxy and dewaxed bleached shellac.
Process of Bleached Shellac
The basic procedure in the bleached process consists in dissolving lac in aqueous sodium carbonate
solution at 90-100 degree celcius, stirring off the dissolved materials and treating the solution with
sodium hydrochloride solution and the start filtration after cooling down the temperature of solution.
The bleached lac is reclaimed from the filtered solution with sulphuric acid. The precipitated bleached
lac is then filtered and washed from water for removal of acid and dried.
The dewaxed bleached shellac powder is approved by FDA USA for application in food and
pharmaceutical products and conforms to specification according to usp-21 nf 18.
Packing: 25 kgs packed in 5 ply craft paper bags.
Storage: Must be stored below 10 degree celcius in cool and dark place.
Industrial uses of Dewaxed Bleached Shellac:
 Coating of fruits and vegetables
 Coating in tablets & capsules
 Coating in confectionary
 Coating in aluminum foil, paper
 Coating in cosmetic industry
Bleached shellac is also widely used in the following industry:
 Paints (primer for plastic parts and plastic film)
 Aluminum industry (primer for aluminum and aluminum foils)
 Flexographic and roto gravure printing inks
 Pharmaceuticals (for coating of pills, tables and gel caps, making barrier coat for Vitamins,
coating for controlled release preparation)
 Confectionery (in coating of confections, chewing gums, marzipan chocolates, nutties, jelly
beans etc)
 Coating of coffee beans
 Binder for food marking inks and stamping inks
 Binder for egg coating
 Barrier coating for processed food
 Vegetable/food coating of oranges, lemons, apples, avocados, plants tomatoes, dry flowers
etc.
 In textiles --used in textile auxiliaries, felt hat stiffening agents)
 Cosmetics--hair spray, hair lacquers, hair shampoos
 Binder for mascara
 Additive for nail lacquers
 Wood finishing; binder for wood coatings and wood stains
 Filter/sealer for porous surfaces and cracks
 Antique frames for paintings
 Wood polish (French polish)
 Textile- textile auxiliaries Adhesives- (additive to special adhesives)

2.  Fireworks and pyrotechnics-- (binder for fireworks, matches etc and used in coating of
magnesia
 Electric (it is binder for lamp cements).
 Electronics (it is binder for insulation materials, serves as additive to moulding compounds.
Mass coating for print-plates and is adhesive for si-cells.)
 Grinding wheels (it is binder for additive of grinding wheels)
 Plastic (it is primer for plastic parts and films)
 Rubber (it is additive to natural rubber and sbr)
 Leather (in leather auxiliaries)
 Seeds coatings
 Fertilizers coatings
The coating performs one or more of the following functions:
Enhances and protects the gloss, serves as a barrier to moisture either entering or leaving the
confection, prevents blocking together, extends shelf like :
Specification of Dewaxed Bleached Shellac
Acid Value 65-90
Ester Value 135-195
Saponification Value 200-260
Melting Point (Capillary Method) 75ºC-91ºC
Wax Content: 0 .20% max.
Moisture: 6% max.
Insolubility in Hot Alcohol 0.10% max.
Rosin Content Nil
Ash Content 0.50% max.
Heavy Metals 10 PPM
Colour Pale Yellow
Arsenic Nil
Iron Nil