This document summarizes the key features of various types of pumps, including progressive cavity pumps, flexible impeller pumps, external lobe pumps, internal lobe pumps, external gear pumps, twin screw pumps, vane pumps, peristaltic pumps, triple screw pumps, internal gear pumps, hot oil pumps, and pumping systems. It outlines the flow rates and pressure capabilities for each pump type and describes their ideal applications.
3. Features of Pc Pumps
• Standard pump for pumping liquid with
solid, fibre and abrasive particles.
• Low NPSH requirements.
• Flow up to: 3300Lpm Pressure up to: 24 bar.
• Ideal for sanitary application.
5. Features of Flexible Impeller Pump
• With minimum Static and rotating
components.
• Self Priming and almost pulsation free flow.
• Flow up to:850Lpm Pressure up to: 180 bar
• Simple and fast demounting along with
compact and low weight design.
7. Features of External Lobe Pump
• Non Contact of Pumping element.
• Wide range of materials for rotor.
• Flow up to: 800lpm Pressure up to: 12 Bar.
• Perfect for hygiene application –CIP/SIP
Cleaning.
9. Features of Internal Lobe Pump
• Simple in construction.
• Energy saving and hence economic.
• Flow up to: 950lpm Pressure up to: 10 Bar.
• An ideal Pump for unloading, transfer and
circulation.
11. Features of External gear pump
• Twisted gears for silent operation.
• PEEK gears for non lubricating media.
• Flow up to:850Lpm Pressure up to: 10 bar
• Ideal for transfer, Process pumping and high
pressure hydraulics.
13. Features of Twin Screw pump
• Capable of running dry.
• Single flow pumps design available for sanitary
application.
• Flow up to: 1000m3/hr Pressure up to: 16
Bar.
• Ideal for Bulk transfer Loading and unloading.
15. Features of vane pump
• Built in self adjusting mechanism for
compensating wear.
• High Volumetric efficiency and dry running
capabilities.
• Flow up to: 400Lpm Pressure up to: 8 Bar.
Capable for pumping fluid with gas.
• Ideal for wide range of clean and non
corrosive fluid.
17. Features of Peristaltic Pumps
• Shaft Sealing is not required
• Reversible flow and absolute volumetric flow
is possible.
• Flow up to: 2500lphPressure up to: 2 Bar.
• Ideal for hazardous & corrosive fluids
19. Features of Triple Screw Pump
• Pump delivers pulsation free flow with low
noise levels.
• Can run at high speeds
• Flow up to: 3600 LPM Pressure up to: 40
Bar.
• Designed for 24*7 critical duties application.
21. Features of Internal gear pump
• Insensitive to viscosity
• With built in speed reducer it delivers fluid
with low noise and pulsation.
• Flow up to: 800Lpm Pressure up to:7 Bar and
in special cases up to 13 Bar
• Pumps extensively used in process industries.
23. Features of Hot oil Pump
• Air cooled no separate pump required for the
cooling jacket.
• Replicable 1:1 with standard Heat oil pump.
• Flow up to: 3500Lpm Pressure up to:10
Bar
• Available with Standard Mechanical Seal &
Magnetic coupling arrangement.
25. Features of Pumping Systems
• Can customize simplex and duplex pumping
systems for lube and fuel oils .
• Can also provide Simplex and duplex strainers
tailor made as per the requirement.
27. Services
• We Undertake Consultation and servicing
• We undertake Annual Maintenance contract
for round a clock service for preventive and
periodic maintenance.
• A complete solution for your pumping
problems
• Can Supply Critical spares for well know
pumps