Grateful 7 speech thanking everyone that has helped.pdf
IronClad Kong Gloves from Project Sales Corp
1. KONG
ORR Safety and our select
partners are the exclusive
worldwide distributors for
the KONG Glove.
The Glove that’s…
King of the Oil ‘N Gas Industry
1-800-669-1677 • www.orrsafety.com/kong
2. Who is ORR Safety? History of the KONG Glove
The
In early 2007, a Safety Committee comprised of members from some of the
KONG world’s largest oil and gas companies (ExxonMobil, ConocoPhillips, Chevron
and Superior Energy) targeted hand injuries as one of the key safety initiatives for
the year. It was through this initiative that ORR Safety was invited to develop a
specialty glove to reduce, if not eliminate, these costly hand injuries…
▄ Hairline Fractures
▄ Bruising Blows
▄ Pinched Fingers
At this time, ORR Safety partnered with Ironclad Performance Wear
Corporation and started the process of developing a specialty glove for the
“oil and gas” industry.
Concept Glove Designed
By the end of August 2007, ORR and Ironclad had created the first oil and
gas concept glove. After additional input from the Safety Committee and a few
final changes, the first “Prototype Glove” became a reality. From November
to December 2007, four companies and over 200 workers field tested
“Prototype Glove #1.”
Field Test Results for Prototype Glove #1
Field Test Overall
Protection Comfort Fit Grip Dexterity Durability Satisfaction
Results
Prototype #1 4.23 3.95 4.08 3.83 3.88 3.67 3.84
Upon reviewing the field test results, it was determined that two primary areas for
Ranked on a Scale
improvement were “grip” and “durability.” Additionally, the velcro wrist strap was
0 —to— 5.0
(Poor) (Excellent) deemed a potential safety hazard. Over the next sixty days, ORR and Ironclad
collaborated to make improvements and developed “Prototype Glove #2.”
Field Test Results for Prototype Glove #2
Field Test Overall
Protection Comfort Fit Grip Dexterity Durability Satisfaction
Results
Prototype #1 4.23 3.95 4.08 3.83 3.88 3.67 3.84
Prototype #2 4.23 4.29 4.47 4.47 4.11 4.35 4.32
After over 80,000 hours of field testing and over a year in development, the
KONG Glove became a reality. Having improved the overall performance rating
of the glove in 6 out of 7 categories and the Safety Committee’s confidence with
the final design of the glove, production of KONG began in July of 2008.
Our thanks goes out to the Safety Committee Members and their companies,
ExxonMobil, ConocoPhillips, Chevron and Superior Energy, for investing time
and effort to improve the safety and well being of the workers who make their
livelihood in the oil and gas industry. We at ORR Safety and Ironclad are honored
to be a part of this process, and thank you for all your input and support.
KONG Glove was…
Designed by Oil & Gas Industry Experts!
3. Revolutionary Full Hand and Finger Protection
Back of Hand Protection
▄ Impact absorbing 3-D Thermoplastic Rubber Ribs.
▄ 4 heavy duty rubber ribs are designed to absorb
and dissipate impacts to the back of the hand.
Knuckle Protection
▄ Foam rubber padding placed between fabric layers
provides added protection and flexibility.
▄ An additional band of Thermoplastic Rubber for protection
against more severe impacts.
Finger and Thumb Protection
▄ One of the most unique features of this glove is the
3-D Thermoplastic Finger Ribs.
▄ These impact absorbing ribs provide extra protection
while at the same time offer flexibility because of
their unique flexible joint construction.
4. KONG
Durability
▄ A second layer of long wearing
Teflon coated synthetic leather
material was added to the palm.
▄ Reinforced cross stitching was
added to reduce the friction
caused by multiple layers of
fabric rubbing together.
I.D. Tag for
Improved Grip Employee Name
▄ Impregnated PVC dots adhered to the ▄ Each employee has the ability to
palm of the glove enhance overall grip. individually mark their gloves.
▄ Additionally the raised PVC dots extend ▄ Helps to control usage and cost.
the life of the glove by absorbing wear
away from the palm fabric.
Since 1948... Protecting People, Property and the Environment!
1-800-669-1677 • www.orrsafety.com/kong
5. Designed by and for the Oil & Gas Industry
Flexible with a High
Degree of Dexterity
▄ Unique Thermoplastic rib joint design offers
surprising comfort and flexibility.
▄ Kong’s form fit provides excellent dexterity.
Machine Washable
▄ Kong is easily washed for
extended wear and personal
hygiene.
▄ Note: Hang dry only, do not use High Visibility
▄ Bright orange coloring and
commercial dryers.
yellow ribs helps to track
hand placement.
▄ Easily seen by operators
from a distance.
Wrist and Sleeve Protection
▄ 2½” Neoprene Cuff provides additional wrist
and forearm protection.
▄ Easy pulls over long sleeves to reduce
snag hazards.
6. 80,000 hours
of testing w
ith
NO INJURIES
!
Designed by
Oil & Gas Industry EXPERTS
to reduce / if not eliminate
the THREE biggest hand
injuries! What users of the KONG Glove
are saying...
“I think the glove is super and
Hairline Fractures is credited by our shop personnel
on three separate occasions for
Bruising Blows preventing a hand injury when
either a tool slipped or a finger was
smashed. Everyone has worked
Pinched Fingers so hard on getting the right
glove and I believe those
efforts will pay off.”
— Kim Redwing
Gulfstream Service, Inc.