1. The document provides step-by-step instructions for restoring an image using the Clonezilla tool. It describes booting from a Clonezilla DVD, navigating the Clonezilla menus to select restoring an image, mounting the image file from the DVD, and restoring the image to the target computer's hard disk.
2. The process involves 17 steps, including booting from the DVD, selecting options in the Clonezilla interface, mounting the image file, selecting the image and target disk, and confirming to start the restoration.
3. Once completed, the restored image contains the OS, programs and settings loaded onto the target computer.
2. Booting from DVD
To upload the image of the desired computer model, we need the following:
1. Knowing the computer of the team for putting the image accordingly.
2. The computer where we want to dump the image must have DVD player, for that will
not lead, we prod him one.
3. Booting the computer must have the first option in the BIOS, booting from the CD-
DVD.
Once satisfied that we have everything necessary, proceed to restore the image of the team.
3. IMAGE RESTORATION WITH CloneZilla
We start by inserting the DVD into the appropriate reader and start the computer from the
same DVD..
1. We will see that the first screen that appears is the following, select:
Clonezilla Live (default settings, VGA 1024x768)
2. Then load Linux to begin the restoration of the image:
3. Now select the language of Clonezilla:
4. Then select "Do not touch keymap"
5. We let you upload and select “Start Clonezilla”.
4. 6. Then select the first option
“device-image Disco/Partición a/desde Imagen”.
7. On the next screen choose
“enter_shell Enter command line prompt.Do it manually”
8. On the next screen that loads then we give “Enter”.
9. Then we mount the image from the dvd, do it through the command
line, type the following: “ mount –t iso9660 /dev/cdrom /home/partimag/”
10. Once you have completed a screen charge like this in which we stated that the device
is mounted correctly and you type “Exit”.
11. Then we select “Beginner Modo Principiante”.
5. 12. In the next screen that appears select
“ Restoredisk : Restaurar imagen a disco local”
13. Select the image file to restore (there is only one in the dvd, so the only
thing that appears.
14. Below are the computer's hard disks, we are asked to select one that is where image
dump. They usually have only 1 HDD, which is the only selectable option.
15. We let you upload the screens and give the "Enter" when we ask for it.
6. 16. We let you upload new information, we give "Enter" again.
17. Continue with the disk check and when completed you type “Y”.
18. He asks if we are sure to continue and select “ Y “.
Finally starts to restore the image. Then restart and we have our OS, programs and settings
loaded.