detailed tutorial on how to root the Cherry Mobile Omega HD 2.0 WARNING: THIS WILL VOID YOUR WARRANTY

1. HOW TO ROOT THE CHERRY
MOBILE OMEGA HD 2.0
QUADCORE SMARTPHONE
TUTORIAL BROUGHT TO YOU BY @PINOYSCREENCAST
SUBSCRIBE AT HTTP://YOUTUBE.COM/PINOYSCREENCAST FOR MORE TIPS AND TRICKS
--------------------------------------------------------------------------------------------------------------------------
STOCK RECOVERY
http://www.4shared.com/zip/iY_sNZ2d/H120_recovery_utc130426-041259.html
--------------------------------------------------------------------------------------------------------------------------
Download and extract the MtkDroidTools_v246.exe
http://dfiles.ru/files/83edkfpic

2. Download and extract the zip file SP_Flash_Tool_v3.1304.0.119
http://www.4shared.com/zip/qphG6aQy/SP_Flash_Tool_v313040119.html

3. Download the Scatter File for Cherry Mobile Omega HD 2.0
http://www.4shared.com/office/VSDzlw4S/MT6589_Android_scatter_emmc.html
Download the CWMR Recovery
http://www.4shared.com/zip/RSn97wX4/H120_130426__recovery_130528-0.html

4. Activate the Developers Option in Jelly Bean 4.2
Check the Developers Option > USB Debugging
Press this 5 times to activate the
Developers Option

6. Check the Security > Unknown Sources
and then insert your USB Cable to your Phone
Download and Install the Android Driver for Windows http://www.4shared.com/zip/82FSagnQ/usb_driver_r07-
windows.html

7. Installing the Driver
Once Downloaded goto Device Manager

8. and you will see that the driver is not installed properly

9. then browse the driver on your computer the one you have downloaded awhile ago

10. choose the location of the and press ok

12. Choose show all devices
Choose Android _wiznusb.inf

14. choose Have disk
Choose Android ADB Interface

15. Update driver

16. if successfully installed you must see the Android ADB Interface on your device manager

17. Next is you need to open the SP Flash Tool and run as administrator

18. click the Scatter-loading then look for the file MT6589_Android_scatter_emmc.txt that you have downloaded
awhile ago and uncheck all the names except for the recovery
and click the recovery and look for the H120_130426__recovery_130528-005823.img that you have downloaded
a while ago
next is to turn off your phone and remove the battery , then click the Download button and put back the battery
and USB cable into the phone and wait for it to finish loading .
if successfully flashed you will see a green mark circle.

19. Now open the MTKdroidTools.exe run as administrator
then shutdown your phone the boot to recovery by pressing volume up + power button at the same time

20. then going back to the MTK Droid Tools
you will notice that the indicator is now color mint blue

21. and the SuperUser is activated click that button and you will see it will prompt you to choose either SuperSU or
SuperUser
I recommend using the SuperSu for this unit because when I tested out the SuperUser it had some issues.
if successfully installed you will the status on the right side

22. now reboot your phone and download the root checker to check if your phone is already rooted
if in case it showed up that your phone is not yet rooted proceed with this next step if note ignore the remaining
procedures
reboot your phone to normal mode
and open again the MTK Droid Tools

23. you will see that it has found that it installed the SU now press the ROOT button
then press yes and wait for it to finish it task
after that check again if it is now rooted
ENJOY!
TROUBLESHOOTING
• try to download the titanium backup and it must prompt the root access permission if not try to open first
the SuperSU app on your phone and then if it prompts you to reboot , try to reboot it.
• also be sure that after you reboot it will show ANDROID IS UPGRADING.