7.pdf This presentation captures many uses and the significance of the number...
Pouch burst 2018
1. Pouch Burst / Inflation Test
Confirms to ASTM F-2095 / 2054
Pouch Burst Tester
(Internal Pressurization till Burst)
Summary : This test in principle is similar to the Pouch Compression Test, except that the pouches
here are subjected to internal air pressure in lieu of external force. The internal burst test is used as a
good overall test for a hermetic seal including an indication of correct heat sealing conditions and a
measure of the ability of a package to withstand transportation and handling.
Applicable to : Flexible pouches and Blister Packs.
Limitation : This test is performed on empty packs only and cannot be performed on product filled
packs.
Test Standard : JETRO / CFIA / ASTM F 1140 (A & B1) / ASTM F 2095 (A & B) / ASTM F 2054
Specifications :
- Fully Automatic, Digital Model
- Suitable to check the seal strength of 4 Side Sealed / formed pouches.
- Can also be used to test sealed Blister Packs / Cups / Trays
- With special puncture-probe that injects air inside the pouch from the front face and
simultaneously senses the internal pressure buildup.
- Advanced Controller which monitors the pressure buildup in the pouch very accurately.
- Double line, backlit LCD display for stress-free viewing.
- Multiple, selectable measurement units (kg/cm2, kPa, psi, bar).
Max Capacity : 6 Kg/cm2 or 85 psi
Least Count (Resolution) : 0.01 Kg/cm2 or 0.1 psi
2. Model Options :
Model # P415D This model is great for testing similar sized pouches.
With Manual Pressure / Flow Setting for a type of pouch.
(Setting needs to be repeated if the pouch size changes)
Model # P415DA This model is great to test any pouch size or variety.
With Automatic Pressure / Flow Setting for ANY type of pouch.
With Electronically Controlled Automatic Pressure Regulator
Gives very precise and gradual pressure rise inside the pouch.
With constant feedback loop for precision.
Attachments / Probes / Modules : (Add one or more of below)
1) Blister Pack Probe (BP)
Hand held probe.
Suitable for Pressure Decay Test and Burst Test on Blister Packs
Suitable for Blister Packs of any size
2) RP0810-3S
Suitable for Pressure Decay Test and Burst Test on Pouches
Restraining Plates + Probe + Manual Clamping Fixture for 3 side sealed pouches.
Suitable for pouches upto 8x10 inches
3) RP0810
Suitable for Pressure Decay Test and Burst
Test on Pouches
Restraining Plates and Probe
Suitable for pouches upto 8x10 inches
4) RP1218
Suitable for Pressure Decay Test and Burst
Test on Pouches
Restraining Plates and Probe
Suitable for pouches upto 12x18 inches
5) RP2024
Suitable for Pressure Decay Test and Burst Test on Pouches
Restraining Plates and Probe
Suitable for pouches upto 20x24 inches
(As per ASTM, restraining plates are essential to facilitate concentration of pressure on seal joints.)
Includes : 4-20 mA MACS Calibrator & Air Filter
Utilities Required : 1) Power Supply : 230 Volts AC at 50 Hz.
2) Clean, Dry, Compressed Air @ 6 bar