Компания СЭА предлагает Вашему вниманию набор аксессуаров UGR для семейства MODULARIS от Khatod.

1. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 1 - Dicember 2017
Contents
1 KEPL142320UGR 20° FWHM Pag. 2
2 KEPL142336UGR 36° FWHM Pag. 3
3 KEPL142360UGR 60° FWHM Pag. 4
4 KEPL142420UGR 20° FWHM Pag. 5
5 KEPL142436UGR 36° FWHM Pag. 6
6 KEPL142460UGR 60° FWHM Pag. 7
7 KEPL155020UGR 20° FWHM Pag. 8
8 KEPL155036UGR 36° FWHM Pag. 9
9 KEPL155060UGR 60° FWHM Pag. 10
10 KEPL155120UGR 20° FWHM Pag. 11
11 KEPL155136UGR 36° FWHM Pag. 12
12 KEPL155160UGR 60° FWHM Pag. 13
13 Assembly Specifications Pag. 14
14 How to order Pag. 15
15 Materials / Use and Maintenance / Disclaimer Pag. 16
Our UGR accessory family is designed to reduce glare from the lighting fixtures.
The UGR accessories are available in different arrays enabling the housing of 6 to 9 lenses.
The UGR accessories are made of black PC.
The following pages show the results achieved by using the UGR accessories with the holders housing the
PL1359xx lenses, in our typical MODULARIS configuration.

2. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 2 - Dicember 2017
KEPL142320UGR - 20° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 24°
• Full angle C0-C180 at 10% from maximum: ~ 46°
• The light spots here represented refer to tests carried out with
7 Watt LEDs, 3mm Dome size, ~ 1610lm
KE1423UGR

3. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 3 - Dicember 2017
KEPL142336UGR - 36° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 35°
• Full angle C0-C180 at 10% from maximum: ~ 67°
• The light spots here represented refer to tests carried out with
7 Watt LEDs, 3mm Dome size, ~ 1610lm
KE1423UGR

4. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 4 - Dicember 2017
KEPL142360UGR - 60° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 54°
• Full angle C0-C180 at 10% from maximum: ~ 92°
• The light spots here represented refer to tests carried out with
7 Watt LEDs, 3mm Dome size, ~ 1610lm
KE1423UGR

5. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 5 - Dicember 2017
KEPL142420UGR - 20° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 25°
• Full angle C0-C180 at 10% from maximum: ~ 46°
• The light spots here represented refer to tests carried out with
9 Watt LEDs, 3mm Dome size, ~ 2070lm
KE1424UGR

6. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 6 - Dicember 2017
KEPL142436UGR - 36° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 35°
• Full angle C0-C180 at 10% from maximum: ~ 67°
• The light spots here represented refer to tests carried out with
9 Watt LEDs, 3mm Dome size, ~ 2070lm
KE1424UGR

7. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 7 - Dicember 2017
KEPL142460UGR - 60° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 52°
• Full angle C0-C180 at 10% from maximum: ~ 91°
• The light spots here represented refer to tests carried out with
9 Watt LEDs, 3mm Dome size, ~ 2070lm
KE1424UGR

8. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 8 - Dicember 2017
KEPL155020UGR - 20° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 24°
• Full angle C0-C180 at 10% from maximum: ~ 44°
• The light spots here represented refer to tests carried out with
6 Watt LEDs, 3mm Dome size, ~ 1380lm
KE1550UGR

9. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 9 - Dicember 2017
KEPL155036UGR - 36° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 35°
• Full angle C0-C180 at 10% from maximum: ~ 70°
• The light spots here represented refer to tests carried out with
6 Watt LEDs, 3mm Dome size, ~ 1380lm
KE1550UGR

10. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 10 - Dicember 2017
KEPL155060UGR - 60° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 61°
• Full angle C0-C180 at 10% from maximum: ~ 107°
• The light spots here represented refer to tests carried out with
6 Watt LEDs, 3mm Dome size, ~ 1380lm
KE1550UGR

11. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 11 - Dicember 2017
KEPL155120UGR - 20° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 24°
• Full angle C0-C180 at 10% from maximum: ~ 44°
• The light spots here represented refer to tests carried out with
9 Watt LEDs, 3mm Dome size, ~ 2070lm
KE1551UGR

12. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 12 - Dicember 2017
KEPL155136UGR - 36° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 34°
• Full angle C0-C180 at 10% from maximum: ~ 66°
• The light spots here represented refer to tests carried out with
9 Watt LEDs, 3mm Dome size, ~ 2070lm
KE1551UGR

13. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 13 - Dicember 2017
KEPL155160UGR - 60° FWHM
• Material = PC, Black, for UGR Accessory
PMMA, Clear, for Lenses
PC, Clear, for Holder
• Full angle C0-C180 at 50% from maximum: ~ 60°
• Full angle C0-C180 at 10% from maximum: ~ 106°
• The light spots here represented refer to tests carried out with
9 Watt LEDs, 3mm Dome size, ~ 2070lm
KE1551UGR

14. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 14 - Dicember 2017
Assembly Specifications
Assembly
• Use TCEI M3 screws
• Maximum recommended tightening
torque: 0.5/0.6 Nm
• Maximum Height : 20.66 mm
(UGR Holders + Clear Holders)
Screws
PCB + LEDs
Heat Sink
20.66mm
UGR Holder
KE1424UGR
PL1359xx
Example
UGR Accessories
KE1424UGR KE1551UGR
KE1423UGR KE1550UGR
Clear Holder
KE1424

15. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 15 - Dicember 2017
How to order
KEPL 1423 XX UGR
Options:
Add UGR for KE1423UGR
20For Narrow Beam
36For Medium Beam
60For Wide Beam
KEPL 1424 XX UGR
Options:
Add UGR for KE1424UGR
20For Narrow Beam
36For Medium Beam
60For Wide Beam
KEPL 1550 XX UGR
Options:
Add UGR for KE1550UGR
20For Narrow Beam
36For Medium Beam
60For Wide Beam
KEPL 1551 XX UGR
Options:
Add UGR for KE1551UGR
20For Narrow Beam
36For Medium Beam
60For Wide Beam
KEPL1423xxUGR
KEPL1424xxUGR
KEPL1550xxUGR
KEPL1551xxUGR
Each element forming the final assembly will be supplied as a single part.
Example: KEPL142320UGR, composed of KE1423 + PL135920 + KE1423UGR, will be supplied disassembled.
Each element forming the final assembly will be supplied as a single part.
Example: KEPL142436UGR, composed of KE1424 + PL135936 + KE1424UGR, will be supplied disassembled.
Each element forming the final assembly will be supplied as a single part.
Example: KEPL155060UGR, composed of KE1550 + PL135960 + KE1550UGR, will be supplied disassembled.
Each element forming the final assembly will be supplied as a single part.
Example: KEPL155120UGR, composed of KE1551 + PL135920 + KE1551UGR, will be supplied disassembled.

16. TECHNICAL DEPT.
Lenses Test Report
www.khatod.com technical@khatod.com Page 16 - Dicember 2017
Material Top
PMMA 8N -40°.....90°C
PC Clear -40°.....120°C
PC Black -40°.....120°C
Please note that flow lines and weld lines on the external surfaces of the lenses are acceptable if the optical performance
of the lens is within the specifications.
Should you require further information, please contact Khatod for advice. All lens testing must be subject to identical
conditions as Khatod test condition. Khatod Optoelectronic, Milan, Italy, manufactures lenses for LEDs. Any other use
of the lens shall void our liability and warranty. The lenses are an inert component to be used in the manufacture of
various products. Our warranty and liability are limited only to the manufacture of the lens. You may not modify, copy,
distribute reproduce, license or alter the lens and related materials of Khatod. Khatod does not warrant against damages
or defects arising out of the use or misuse of the products; against defects or damage arising from improper installation,
or against defects in the product or in its components. No warranty of any kind, expressed or implied, is made regarding
the safety of the products. The entire risk as to the quality or performance of the product is with the buyer. In no event
shall Khatod be liable for any direct, indirect, punitive, incidental, special, consequential damages, or any damages
whatsoever arising out of or connected with the use or misuse of the product. Khatod shall not have any obligation with
respect to the product or any part thereof, whether based on contract, tort, strict liability or otherwise. Buyer assumes
all risks and liability from use of the product. The laws of Milan, Italy govern this product warranty and liability and
you hereby consent to the exclusive jurisdiction and venue of courts in Milan, Italy in all disputes arising out of or
relating to the use of this product. Production, marketing, distribution, sale of these products as well as their possible
modifications and variations are only exclusive right of Khatod Optoelectronic. No company can perform any of these
actions without written permission released by Khatod Optoelectronic. The information contained in this document is
proprietary of Khatod Optoelectronic and may change without notice.
REPRODUCTION PROHIBITED.
• DO NOT HANDLE OR INSTALL LENSES WITHOUT WEARING GLOVES, SKIN OILS MAY DAMAGE
LENS OR LIGHT TRANSMISSION;
• CLEAN LENSES WITH MILD SOAP AND WATER AND A SOFT CLOTH;
• DO NOT USE ANY COMMERCIAL CLEANING SOLVENTS ON LENSES.
Use and Maintenance
Disclaimer
Materials
Notes:
• Intensity (I) and illuminance (E) data are normalized by 1000 lm
• The optical values shown are the result of optical simulations carried out with LIGHTOOLS, ASAP and ZEMAX
software systems. The optical simulations are carried out on the basis of the typical values provided in the LED
manufacturers’ official datasheets. The photometric analysis has been carried out on physical samples.
On request, by supplying your PCB, we can provide the measurement photometric file.