Ce diaporama a bien été signalé.
Nous utilisons votre profil LinkedIn et vos données d’activité pour vous proposer des publicités personnalisées et pertinentes. Vous pouvez changer vos préférences de publicités à tout moment.

Norton Bevel System - Brochure

97 vues

Publié le

To prepare a clean, quality weld seam, it’s important to have a superior edge, and the correct preparation sequence prevents costly rework. The NorBevel-6 and NorBevel-12 range of machines and accessories are new additions to Norton’s metal fabrication solutions.

  • Soyez le premier à commenter

  • Soyez le premier à aimer ceci

Norton Bevel System - Brochure

  1. 1. NORTON BEVELSYSTEMS A REVOLUTION IN BEVELLING AND ROUNDING
  2. 2. 02 NORTON BEVELSYSTEMS New Norton NorBevel-6 and NorBevel-12 machines are a revolution in bevelling and rounding metal! Norton now offers two new machine ranges, compact and ergonomic, electric and the pneumatic to make bevelling and rounding metal easier, faster, more accurate and more cost effective. The NorBevel concept has been designed for heavy-duty bevelling and radius work, bevelling up to a depth of 12 mm. BETTER WORKING CONDITIONS Lightweight and almost vibration-free. The chips are large enough to immediately drop to the ground. No hazardous dust particles and/or combustion gases are released. A MORE CONSISTENT AND ACCURATE ANGLE NorBevel-6 and NorBevel-12 machines provide a more consistent and accurate angle to the metal for a stronger welded joint. A MACHINE QUALITY FINISH WITHOUT CONTAMINATION A better quality weld joint is created through reduced encapsulation of impurities in the weld, as NorBevel does not contaminate the metal. SPEED AND FLEXIBILITY Approximately 1.2m of bevelling can be done in one minute. In a matter of seconds the machine can be adjusted and the bevel heads replaced. NO FINISHING AND NO DISCOLORATION A perfect end result straight away, without finishing. Discoloration is prevented through reduced-sparking that adds hardly any heat to the material. UNIFORM QUALITY A larger bonding surface is created for paint and coatings due to the uniform radius. Cable feed glands are no longer required to prevent chafing when feeding through cables, wiring and/or piping. A QUALITY FINISH Only with NorBevel you can quickly achieve high levels of constant quality when rounding metal. SPEED AND FLEXIBILITY Rounding small openings from a diameter of 18 mm is easy due to the compact and lightweight machine design. Rounding metal now has an unprecedented degree of flexibility. FOR BEVELLING, NORBEVEL PROVIDES: FOR ROUNDING, NORBEVEL PROVIDES:
  3. 3. 03 THE NORTON NORBEVEL-12 RANGE The NorBevel 12 models have been designed for heavy duty bevelling and radius work, bevelling up to a depth of 12 mm. Both the EBA-12 and ABA-12 models have powerful motors, adjustable heads for adapting bevelling depth, and come in a convenient travel case with adaptor. The electric version, EBA-12 has a variable speed switch for greater control. NORBEVEL EBA-12 ELECTRIC NORBEVEL-12 ELECTRIC (EBA-12) Part no. 66261107700 Motor Electric Max. bevel depth 12 mm Bevel radius R2, R3, R4, R5, R6, R8 Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60 Air pressure - Air consumption - Power 1.53kw Voltage 230 V / 120 V Speed 10.500 rpm Weight 4,5 kg Min. pipe/opening diameter 41 mm NORBEVEL ABA-12 PNEUMATIC NORBEVEL-12 PNEUMATIC (ABA-12) Part no. 66261107706 Motor Pneumatic Max. bevel depth 12 mm Bevel radius R2, R3, R4, R5, R6, R8 Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60 Air pressure 6 bar Air consumption 1100 ltr / min Power 2 PK / 1,48kw Voltage - Speed 10.000 rpm Weight 5,66 kg Min. pipe/opening diameter 41 mm Bevel head with depth adjustment Variable speed setting Supplied in a  convenient case Bevel head with depth adjustment Safety lever Supplied in a  convenient case
  4. 4. 04 Premium heads for Plasma / Laser-cut steel and Stainless steel Part Number Radius Max depth Pk qty 66261136479 R2 8mm 1 66261136480 R3 1 66261146202 R4 1 66261152485* R5 1 66261152487* R6 1 66261152489* R8 1 Part Number Angle Max depth Pk qty 66261146203 15° 8mm 1 66261146204* 22,5° 1 66261146205 30° 1 66261146206* 37,5° 1 66261136503 45° 1 66261146207* 52,5° 1 66261146209* 60° 1 Part Number Angle Max depth Pk qty 66261146210 15° 12mm 1 66261146211* 22,5° 1 66261146212 30° 1 66261146215* 37,5° 1 66261146216 45° 1 66261146219* 52,5° 1 66261146220* 60° 1 Steel Part Number Radius Max depth Pk qty 66261107707 R2 8mm 1 66261107799 R3 1 66261107801 R4 1 Part Number Angle Max depth Pk qty 66261107802 15° 8mm 1 66261107804* 22,5° 1 66261107805 30° 1 66261107806* 37,5° 1 66261107809 45° 1 66261146142* 52,5° 1 66261107811* 60° 1 Part Number Radius Max depth Pk qty 66261107812 15° 12mm 1 66261107840* 22,5° 1 66261107841 30° 1 66261107843* 37,5° 1 66261107844 45° 1 66261146144* 52,5° 1 66261107845* 60° 1 HEADS FOR NORBEVEL-12 (ELECTRIC AND PNEUMATIC) * MTO item * MTO item Aluminium, plastic, brass and all soft metals Part Number Radius Max depth Pk qty 66261113318 R2 8mm 1 66261113319 R3 1 66261113320 R4 1 66261152479 R5 1 66261152482 R6 1 66261152484 R8 1 Part Number Angle Max depth Pk qty 66261146151* 15° 8mm 1 66261146162* 22,5° 1 66261113321 30° 1 66261146164* 37,5° 1 66261113323 45° 1 66261146165* 52,5° 1 66261146166* 60° 1 Part Number Radius Max depth Pk qty 66261146167* 15° 12mm 1 66261146168* 22,5° 1 66261146169 30° 1 66261146170* 37,5° 1 66261146171 45° 1 66261146172* 52,5° 1 66261146173* 60° 1 * MTO item Recommended maximum cut depth is 4mm per pass. Replace the cutting head in seconds!
  5. 5. 05 THE NORTON NORBEVEL-6 RANGE For lighter bevelling and rounding to a depth of 6 mm, the NorBevel-6 machines are compact, maneuverable, and available in two super light weight models, with electric and pneumatic motors. The Premium version can be used for more precise depth adjustment of 0.1 mm. Spindle lock for a lighter and quicker change of NorBevel heads, only one allen key is required. NORBEVEL EBI-6 ELECTRIC PREMIUM NORBEVEL-6 ELECTRIC (EBI-06) Premium Part no. 66261126777 Motor Electric Max. bevel depth 6 mm Bevel radius R2, R3, R4 Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60 Air pressure - Air consumption - Power 500 W Voltage 230 V / 120 V Speed 11.000 rpm Weight 2,0 kg Min. pipe/opening diameter 22 mm NORBEVEL EBI-6 ELECTRIC NORBEVEL-6 ELECTRIC (EBI-06) Part no. 66261107846 Motor Electric Max. bevel depth 6 mm Bevel radius R2, R3, R4 Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60 Air pressure - Air consumption - Power 500 W Voltage 230 V / 120 V Speed 11.000 rpm Weight 1,6 kg Min. pipe/opening diameter 22 mm Variable speed settings Supplied in a  convenient case Easy to adjust cutting depth Variable speed settings Supplied in a  convenient case Easy to use BEST GOOD
  6. 6. 06 NORBEVEL ABIS-6 PNEUMATIC PREMIUM NORBEVEL-6 PNEUMATIC (ABIS-06) Premium Part no. 66261129888 Motor Pneumatic Max. bevel depth 6 mm Bevel radius R2, R3, R4 Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60 Air pressure 6 bar Air consumption 310 ltr / min Power 8 PK / 0.38 kw Voltage - Speed 25.000 rpm Weight 1,1 kg Min. pipe/opening diameter 22 mm NORBEVEL EBI-6 PNEUMATIC NORBEVEL-6 PNEUMATIC (ABIS-06) Part no. 66261107847 Motor Pneumatic Max. bevel depth 6 mm Bevel radius R2, R3, R4 Bevel angle 15°- 22,5°- 30°- 37,5°- 45°- 60 Air pressure 6 bar Air consumption 310 ltr / min Power 8 PK / 0.38 kw Voltage - Speed 25.000 rpm Weight 0.8 kg Min. pipe/opening diameter 22 mm Safety lever Supplied in a  convenient case Easy to adjust cutting depth and replace cutting head Safety lever Supplied in a  convenient case Easy to use BEST GOOD
  7. 7. 07 HEADS FOR NORBEVEL-6 Premium heads for Plasma / Laser-cut steel and Stainless steel Part Number Radius Max depth Pk qty 66261136486 R2 6mm 1 66261136502 R3 1 66261146174 R4 1 Part Number Angle Max depth Pk qty 66261146175 15° 6mm 1 66261146178* 22,5° 1 66261146179 30° 1 66261146180* 37,5° 1 66261136504 45° 1 66261146181* 52,5° 1 66261146182* 60° 1 Steel Part Number Radius Max depth Pk qty 66261107851 R2 6mm 1 66261107852 R3 1 66261107853 R4 1 Part Number Angle Max depth Pk qty 66261107854 15° 6mm 1 66261107855* 22,5° 1 66261107856 30° 1 66261107857* 37,5° 1 66261107858 45° 1 66261146141* 52,5° 1 66261107859* 60° 1 * MTO item * MTO item Aluminium, plastic, brass and all soft metals Part Number Radius Max depth Pk qty 66261113306 R2 6mm 1 66261113309 R3 1 66261113310 R4 1 Part Number Angle Max depth Pk qty 66261146145* 15° 6mm 1 66261146146* 22,5° 1 66261113311 30° 1 66261146147* 37,5° 1 66261113312 45° 1 66261146149* 52,5° 1 66261146150* 60° 1 * MTO item Recommended maximum cut depth is 4mm per pass. Replace the cutting head in seconds!
  8. 8. Norton is a registered trademark of Saint-Gobain Abrasives. Form # 3208 Saint-Gobain Abrasifs European Headquarters Rue de l’Ambassadeur - B.P.8 78 702 Conflans Cedex France Tel: +33 (0)1 34 90 40 00 Fax: +33 (0)1 39 19 89 56 www.nortonabrasives.com

×