New holland l228 tier 4 b (final) europe skid steer loader service repair manualfjsjfkskefmem
This document provides service information for Tier 4B engines used in New Holland C227, C232, L221, and L228 skid steer and compact track loaders. It contains over 150 sections covering the engine and all related systems, with detailed removal and installation instructions. Safety precautions are provided throughout regarding handling heavy components, draining fluids, battery and refrigerant handling.
New holland cx720 combine harvesters service repair manualfjsjfkskefmem
The document provides an overview and component locations of the primary hydraulic power system for a New Holland agricultural vehicle. The system uses a closed-center load sensing pump to supply oil to circuits for steering, header height control, straw elevator functions, lateral flotation, reel adjustment, and unloading tube control. Key components include hydraulic pumps and motors, valves, cylinders, filters, accumulators, and manifolds.
New holland cs540 combine harvesters service repair manualfjsjfkskefmem
This document is a repair manual for New Holland agricultural equipment models CS520, CS540, CS640, CS660, and CL560. It contains sections on the machines' distribution systems, power production, power train, travelling systems, body and structure, tool positioning, and crop processing. The sections contain chapters that provide technical data, functional descriptions, diagnostic information, and service procedures for the machines' components and systems. The manual uses a coding system to uniquely identify each piece of technical information and allow users to easily search for the specific information they need.
New holland cr7.90 combine harvesters service repair manualfjsjfkskefmem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections on the various systems of the combines, including the engine, transmission, hydraulics, electrical systems, attachments and more. Safety guidelines are provided at the beginning emphasizing disengaging machinery, reducing pressures, and using proper protective equipment during maintenance.
New holland c227 tier 4 b final [ndm471836 ]north america compact track load...fjsjfkskefmem
This document is a service manual for New Holland C227, C232, L221, and L228 compact track loaders and skid steer loaders that comply with Tier 4B emissions standards. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety and environmental rules are also provided regarding the handling and disposal of fluids, fuels, and other materials.
Caterpillar cat d4 e track tractor service repair manual (77w01664 and up)fjsjfkskefmem
This document provides instructions for removing and installing a fuel priming pump on a Caterpillar D4E track-type tractor with a 3304 engine. The removal procedure involves turning off the fuel supply line valve, removing bolts and washers to detach the pump from its base, disconnecting a tube assembly, and removing two bolts to detach the base from the cylinder block. The installation procedure is the reverse of removal. Proper cleanliness and containment of fluids is emphasized.
Caterpillar cat d4 e track tractor (prefix 68x) service repair manual (68x007...fjsjfkskefmem
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, removing the fuel transfer pump, and disassembling the fuel transfer pump on a Caterpillar D4E track-type tractor with a 3304 engine. The procedures include illustrations and describe disconnecting fuel lines, removing bolts and parts, checking gaskets, and containing fluids.
Caterpillar cat d4 e track tractor (prefix 68x) service repair manual (68x000...fjsjfkskefmem
This document provides instructions for removing and disassembling fuel system components on a Caterpillar D4E track-type tractor with a 3304 engine. The procedures include:
1. Removing the fuel priming pump by taking off bolts, washers and a gasket.
2. Removing the fuel filter base by disconnecting a fuel line, removing bolts and washers, and taking off a gasket.
3. Disassembling the fuel transfer pump by removing tubes, bolts, an O-ring seal, and taking apart the pump housing, piston, springs, and valves.
New holland l228 tier 4 b (final) europe skid steer loader service repair manualfjsjfkskefmem
This document provides service information for Tier 4B engines used in New Holland C227, C232, L221, and L228 skid steer and compact track loaders. It contains over 150 sections covering the engine and all related systems, with detailed removal and installation instructions. Safety precautions are provided throughout regarding handling heavy components, draining fluids, battery and refrigerant handling.
New holland cx720 combine harvesters service repair manualfjsjfkskefmem
The document provides an overview and component locations of the primary hydraulic power system for a New Holland agricultural vehicle. The system uses a closed-center load sensing pump to supply oil to circuits for steering, header height control, straw elevator functions, lateral flotation, reel adjustment, and unloading tube control. Key components include hydraulic pumps and motors, valves, cylinders, filters, accumulators, and manifolds.
New holland cs540 combine harvesters service repair manualfjsjfkskefmem
This document is a repair manual for New Holland agricultural equipment models CS520, CS540, CS640, CS660, and CL560. It contains sections on the machines' distribution systems, power production, power train, travelling systems, body and structure, tool positioning, and crop processing. The sections contain chapters that provide technical data, functional descriptions, diagnostic information, and service procedures for the machines' components and systems. The manual uses a coding system to uniquely identify each piece of technical information and allow users to easily search for the specific information they need.
New holland cr7.90 combine harvesters service repair manualfjsjfkskefmem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections on the various systems of the combines, including the engine, transmission, hydraulics, electrical systems, attachments and more. Safety guidelines are provided at the beginning emphasizing disengaging machinery, reducing pressures, and using proper protective equipment during maintenance.
New holland c227 tier 4 b final [ndm471836 ]north america compact track load...fjsjfkskefmem
This document is a service manual for New Holland C227, C232, L221, and L228 compact track loaders and skid steer loaders that comply with Tier 4B emissions standards. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety and environmental rules are also provided regarding the handling and disposal of fluids, fuels, and other materials.
Caterpillar cat d4 e track tractor service repair manual (77w01664 and up)fjsjfkskefmem
This document provides instructions for removing and installing a fuel priming pump on a Caterpillar D4E track-type tractor with a 3304 engine. The removal procedure involves turning off the fuel supply line valve, removing bolts and washers to detach the pump from its base, disconnecting a tube assembly, and removing two bolts to detach the base from the cylinder block. The installation procedure is the reverse of removal. Proper cleanliness and containment of fluids is emphasized.
Caterpillar cat d4 e track tractor (prefix 68x) service repair manual (68x007...fjsjfkskefmem
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, removing the fuel transfer pump, and disassembling the fuel transfer pump on a Caterpillar D4E track-type tractor with a 3304 engine. The procedures include illustrations and describe disconnecting fuel lines, removing bolts and parts, checking gaskets, and containing fluids.
Caterpillar cat d4 e track tractor (prefix 68x) service repair manual (68x000...fjsjfkskefmem
This document provides instructions for removing and disassembling fuel system components on a Caterpillar D4E track-type tractor with a 3304 engine. The procedures include:
1. Removing the fuel priming pump by taking off bolts, washers and a gasket.
2. Removing the fuel filter base by disconnecting a fuel line, removing bolts and washers, and taking off a gasket.
3. Disassembling the fuel transfer pump by removing tubes, bolts, an O-ring seal, and taking apart the pump housing, piston, springs, and valves.
Caterpillar cat d4 e track tractor (prefix 2cb) service repair manual (2cb000...fjsjfkskefmem
This document provides instructions for removing and disassembling the fuel injection pump housing and governor from a Caterpillar D4E track-type tractor powered by a 3304 engine. The removal procedure involves disconnecting fuel lines and other components, then using lifting equipment to remove the housing. The disassembly process describes removing various parts like covers, lifters, bearings, and the camshaft from the housing. The assembly section outlines installing bearings, the camshaft, washer and other parts back into the housing.
Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...fjsjfkskefmem
This document provides service information for the travel drive and motor of an E70B excavator model. It includes three pages of specifications and diagrams of the excavator's components. The bulk of the document describes the functional construction and operating principles of the travel drive and motor system. It explains how the swash plate motor, counter-balance valve, parking brake, and reduction gears work together to convert hydraulic pressure into rotational force to power the tracks and control travel speed.
The document provides instructions for properly installing Duo-Cone seals. It describes the components of a Duo-Cone seal and the assembly process. Critical steps include cleaning and inspecting the seal ring, rubber toric, and housing to ensure they are free of contamination or damage before installation. The seal ring and toric must be aligned and installed within specified tolerances to prevent leaks.
Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...fjsjfkskefmem
This document provides instructions for removing and installing a bulldozer blade on a D6R track-type tractor. It lists the required tools and safety precautions. The removal process involves disconnecting hydraulic hoses, removing caps and bolts from the lift cylinders and stabilizer link, and using tooling to support the push arms. Reinstallation is the reverse of the removal process.
Caterpillar cat 3054 c industrial engine (prefix 334) service repair manual (...fjsjfkskefmem
- The document provides installation instructions for a fuel injection pump on a 3054C industrial engine.
- It describes 11 steps for installing the pump, including installing seals, bolts, gears, tubes and ensuring proper timing.
- Proper installation of the spacer and tightening of bolts is emphasized to prevent contact with the pump shaft.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fjsjfkskefmem
This document provides instructions for servicing the valves, valve guides, valve seat inserts, water directors, pistons, and connecting rods of a D5H Track-Type Skidder Series II engine. It describes how to remove and install these components, noting identification marks, cleaning, lubrication steps, and proper tool usage. Removal involves disassembling the engine down to the cylinder block, while installation requires reassembling components in the reverse order. Precautions are provided to prevent damage during disassembly and assembly.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fjsjfkskefmem
This document provides instructions for servicing the air conditioning and heating system and turbocharger on a 973C track loader with a C9 engine. It describes safety precautions when working on the refrigerant system and notes to keep all parts clean. Steps are outlined for removing and installing the turbocharger and exhaust manifold.
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x000...fjsjfkskefmem
This service repair manual provides instructions for repairing D5B track tractors with 3306 engines. It describes removing and installing various engine components like the front housing, valve mechanism cover, and gear group in the front of the engine. The procedures provide details on required tools, cleaning parts, applying sealants, and proper torque specifications for reinstallation.
Caterpillar cat 951 c track loader (prefix 86j) service repair manual (86j040...fjsjfkskefmem
- The document provides instructions for disassembling and assembling starting motors for Caterpillar track loaders and excavators.
- It describes removing over a dozen parts from the starting motor housing, including the rear housing, brushes, field winding coils, and pinion drive components.
- Cleaning and inspection steps are included to check all parts for wear and damage before reassembling the starting motor.
Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...fjsjfkskefmem
This document provides instructions for servicing the cylinder head assembly of a Caterpillar 3304 engine. It describes removing and installing the cylinder head assembly in 31 steps, including draining coolant, removing bolts and various components, loosening belts, and installing push rods and valves. It also describes separately removing and installing the spacer plate and valve lifters. The overall document provides detailed disassembly and reassembly instructions for servicing the cylinder head.
Caterpillar cat 951 c track loader (prefix 86j) service repair manual (86j019...fjsjfkskefmem
The document provides instructions for disassembling three types of starting motors used in Caterpillar track loaders and excavators:
1. The disassembly process involves removing 19 main components like the solenoid, rear housing, brushes, pinion drive housing, and field winding coil.
2. Tools needed include retaining ring pliers and a driver. Detailed steps explain how to remove each part, with illustrations showing the component locations.
3. Technicians should mark parts for reassembly, clean components with mineral spirits, and inspect all parts for wear and damage after disassembly.
Caterpillar cat 420 e backhoe loader (prefix djl) service repair manual (djl0...fjsjfkskefmem
The document provides instructions for removing and installing the front drive shaft on a Caterpillar 420E backhoe loader. It describes:
1) Using a hydraulic jack to support the drive shaft guard and remove bolts to lower the guard.
2) Removing bolts to detach the front drive shaft.
3) Installing the drive shaft and tightening new bolts to the specified torque.
4) Raising the guard back into position and installing new bolts.
Caterpillar cat d4 htsk ii track skidder (prefix 8zf) service repair manual (...fjsjfkskefmem
This document provides instructions for servicing components of a D4HTSK II Track Skidder, including removing and installing the cylinder head assembly. The key steps are to drain coolant, remove manifolds, covers and other attached components. Then remove bolts holding the cylinder head and lift it off using tooling and a hoist. Reinstallation involves installing spacers, bolts, push rods and rocker assembly with lubricant before tightening bolts on the cylinder head.
Caterpillar cat 420 e backhoe loader (prefix dan) service repair manual (dan0...fjsjfkskefmem
The document provides instructions for removing and installing the lift cylinder and lift arms on a 420E backhoe loader. Key steps include:
1. Release hydraulic pressure and remove hoses from the lift cylinder before removing it from the lift arms.
2. Use retaining ring pliers and a lifting device to detach the cylinder, then remove it.
3. To remove the lift arms, first remove the tilt cylinder, bucket, and lift cylinder. Then use pliers to remove pins and bearings from the arms before lifting them off.
4. Installation follows the reverse of removal, taking care to clean parts and apply retaining compounds before reattaching cylinders and bearings.
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...fjsjfkskefmem
This document provides instructions for servicing a 951B/C track loader. It discusses general instructions for disassembly and assembly including safety, cleanliness, removal and installation of parts, cleaning and handling of parts, and use of service tools. It provides details on pressing parts, bolt torque, a torque-turn-tighten procedure, using torque wrench extensions, and torque multipliers.
Caterpillar cat 416 f backhoe loader (prefix lwt) service repair manual (lwt0...fjsjfkskefmem
The document provides instructions for removing and disassembling components related to the rocker shaft and cylinder head on a Caterpillar 416F backhoe loader engine. The procedures include removing the rocker shaft assembly, pushrods, glow plugs, exhaust manifold, fuel injectors and other components. The cylinder head is then removed by gradually loosening setscrews and lifting the head off using a lifting device.
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j025...fjsjfkskefmem
The document provides instructions for disassembling three types of starting motors used on Caterpillar equipment:
1) Remove components like the solenoid, rear housing, brushes, and pinion drive housing to access the internal parts.
2) Mark components for correct reassembly and remove retaining rings, pins, and seals.
3) Extract the armature, field winding coil, and pole shoes from the motor housing.
4) Inspect all parts for wear and clean as needed before reassembly.
Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...fjsjfkskefmem
This service repair manual provides instructions for repairing and replacing components of the fuel system for a 422E Backhoe Loader powered by a C4.4 engine, including:
- Removing and installing the fuel priming pump and fuel filter base.
- Removing and installing the fuel injection lines.
- Removing the fuel injection nozzles.
- Installing the fuel injection nozzles.
- Removing the Delphi DP210 fuel injection pump.
The document provides detailed step-by-step instructions and illustrations for completing each repair or replacement, with notes about required tools and safety precautions. Removal and installation procedures for each component are presented separately.
Caterpillar cat 416 e backhoe loader (prefix sha) service repair manual (sha0...fjsjfkskefmem
The document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal process involves draining fluids, disconnecting wiring harnesses and hydraulic lines, and removing mounting hardware. The transmission is then lifted out of the machine. Disassembly separates the transmission into its major components like the torque converter, pump group, and valve groups through removal of mounting bolts and seals.
Caterpillar cat 416 d backhoe loader (prefix cxp) service repair manual (cxp0...fjsjfkskefmem
This document provides instructions to disconnect and separate the engine, torque converter, and transmission from a 416D backhoe loader. It outlines 41 steps to disconnect wiring harnesses, hoses, bolts and other components. The engine and transmission assembly weighs 680 kg and must be lifted and supported by tools during separation from the vehicle. Once separated, the transmission weighs 227 kg on its own.
Caterpillar cat d4 e track tractor (prefix 2cb) service repair manual (2cb000...fjsjfkskefmem
This document provides instructions for removing and disassembling the fuel injection pump housing and governor from a Caterpillar D4E track-type tractor powered by a 3304 engine. The removal procedure involves disconnecting fuel lines and other components, then using lifting equipment to remove the housing. The disassembly process describes removing various parts like covers, lifters, bearings, and the camshaft from the housing. The assembly section outlines installing bearings, the camshaft, washer and other parts back into the housing.
Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...fjsjfkskefmem
This document provides service information for the travel drive and motor of an E70B excavator model. It includes three pages of specifications and diagrams of the excavator's components. The bulk of the document describes the functional construction and operating principles of the travel drive and motor system. It explains how the swash plate motor, counter-balance valve, parking brake, and reduction gears work together to convert hydraulic pressure into rotational force to power the tracks and control travel speed.
The document provides instructions for properly installing Duo-Cone seals. It describes the components of a Duo-Cone seal and the assembly process. Critical steps include cleaning and inspecting the seal ring, rubber toric, and housing to ensure they are free of contamination or damage before installation. The seal ring and toric must be aligned and installed within specified tolerances to prevent leaks.
Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...fjsjfkskefmem
This document provides instructions for removing and installing a bulldozer blade on a D6R track-type tractor. It lists the required tools and safety precautions. The removal process involves disconnecting hydraulic hoses, removing caps and bolts from the lift cylinders and stabilizer link, and using tooling to support the push arms. Reinstallation is the reverse of the removal process.
Caterpillar cat 3054 c industrial engine (prefix 334) service repair manual (...fjsjfkskefmem
- The document provides installation instructions for a fuel injection pump on a 3054C industrial engine.
- It describes 11 steps for installing the pump, including installing seals, bolts, gears, tubes and ensuring proper timing.
- Proper installation of the spacer and tightening of bolts is emphasized to prevent contact with the pump shaft.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fjsjfkskefmem
This document provides instructions for servicing the valves, valve guides, valve seat inserts, water directors, pistons, and connecting rods of a D5H Track-Type Skidder Series II engine. It describes how to remove and install these components, noting identification marks, cleaning, lubrication steps, and proper tool usage. Removal involves disassembling the engine down to the cylinder block, while installation requires reassembling components in the reverse order. Precautions are provided to prevent damage during disassembly and assembly.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fjsjfkskefmem
This document provides instructions for servicing the air conditioning and heating system and turbocharger on a 973C track loader with a C9 engine. It describes safety precautions when working on the refrigerant system and notes to keep all parts clean. Steps are outlined for removing and installing the turbocharger and exhaust manifold.
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x000...fjsjfkskefmem
This service repair manual provides instructions for repairing D5B track tractors with 3306 engines. It describes removing and installing various engine components like the front housing, valve mechanism cover, and gear group in the front of the engine. The procedures provide details on required tools, cleaning parts, applying sealants, and proper torque specifications for reinstallation.
Caterpillar cat 951 c track loader (prefix 86j) service repair manual (86j040...fjsjfkskefmem
- The document provides instructions for disassembling and assembling starting motors for Caterpillar track loaders and excavators.
- It describes removing over a dozen parts from the starting motor housing, including the rear housing, brushes, field winding coils, and pinion drive components.
- Cleaning and inspection steps are included to check all parts for wear and damage before reassembling the starting motor.
Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...fjsjfkskefmem
This document provides instructions for servicing the cylinder head assembly of a Caterpillar 3304 engine. It describes removing and installing the cylinder head assembly in 31 steps, including draining coolant, removing bolts and various components, loosening belts, and installing push rods and valves. It also describes separately removing and installing the spacer plate and valve lifters. The overall document provides detailed disassembly and reassembly instructions for servicing the cylinder head.
Caterpillar cat 951 c track loader (prefix 86j) service repair manual (86j019...fjsjfkskefmem
The document provides instructions for disassembling three types of starting motors used in Caterpillar track loaders and excavators:
1. The disassembly process involves removing 19 main components like the solenoid, rear housing, brushes, pinion drive housing, and field winding coil.
2. Tools needed include retaining ring pliers and a driver. Detailed steps explain how to remove each part, with illustrations showing the component locations.
3. Technicians should mark parts for reassembly, clean components with mineral spirits, and inspect all parts for wear and damage after disassembly.
Caterpillar cat 420 e backhoe loader (prefix djl) service repair manual (djl0...fjsjfkskefmem
The document provides instructions for removing and installing the front drive shaft on a Caterpillar 420E backhoe loader. It describes:
1) Using a hydraulic jack to support the drive shaft guard and remove bolts to lower the guard.
2) Removing bolts to detach the front drive shaft.
3) Installing the drive shaft and tightening new bolts to the specified torque.
4) Raising the guard back into position and installing new bolts.
Caterpillar cat d4 htsk ii track skidder (prefix 8zf) service repair manual (...fjsjfkskefmem
This document provides instructions for servicing components of a D4HTSK II Track Skidder, including removing and installing the cylinder head assembly. The key steps are to drain coolant, remove manifolds, covers and other attached components. Then remove bolts holding the cylinder head and lift it off using tooling and a hoist. Reinstallation involves installing spacers, bolts, push rods and rocker assembly with lubricant before tightening bolts on the cylinder head.
Caterpillar cat 420 e backhoe loader (prefix dan) service repair manual (dan0...fjsjfkskefmem
The document provides instructions for removing and installing the lift cylinder and lift arms on a 420E backhoe loader. Key steps include:
1. Release hydraulic pressure and remove hoses from the lift cylinder before removing it from the lift arms.
2. Use retaining ring pliers and a lifting device to detach the cylinder, then remove it.
3. To remove the lift arms, first remove the tilt cylinder, bucket, and lift cylinder. Then use pliers to remove pins and bearings from the arms before lifting them off.
4. Installation follows the reverse of removal, taking care to clean parts and apply retaining compounds before reattaching cylinders and bearings.
Caterpillar cat 951 c track loader (prefix 69h) service repair manual (69h036...fjsjfkskefmem
This document provides instructions for servicing a 951B/C track loader. It discusses general instructions for disassembly and assembly including safety, cleanliness, removal and installation of parts, cleaning and handling of parts, and use of service tools. It provides details on pressing parts, bolt torque, a torque-turn-tighten procedure, using torque wrench extensions, and torque multipliers.
Caterpillar cat 416 f backhoe loader (prefix lwt) service repair manual (lwt0...fjsjfkskefmem
The document provides instructions for removing and disassembling components related to the rocker shaft and cylinder head on a Caterpillar 416F backhoe loader engine. The procedures include removing the rocker shaft assembly, pushrods, glow plugs, exhaust manifold, fuel injectors and other components. The cylinder head is then removed by gradually loosening setscrews and lifting the head off using a lifting device.
Caterpillar cat 951 b track loader (prefix 86j) service repair manual (86j025...fjsjfkskefmem
The document provides instructions for disassembling three types of starting motors used on Caterpillar equipment:
1) Remove components like the solenoid, rear housing, brushes, and pinion drive housing to access the internal parts.
2) Mark components for correct reassembly and remove retaining rings, pins, and seals.
3) Extract the armature, field winding coil, and pole shoes from the motor housing.
4) Inspect all parts for wear and clean as needed before reassembly.
Caterpillar cat 422 e backhoe loader (prefix maw) service repair manual (maw0...fjsjfkskefmem
This service repair manual provides instructions for repairing and replacing components of the fuel system for a 422E Backhoe Loader powered by a C4.4 engine, including:
- Removing and installing the fuel priming pump and fuel filter base.
- Removing and installing the fuel injection lines.
- Removing the fuel injection nozzles.
- Installing the fuel injection nozzles.
- Removing the Delphi DP210 fuel injection pump.
The document provides detailed step-by-step instructions and illustrations for completing each repair or replacement, with notes about required tools and safety precautions. Removal and installation procedures for each component are presented separately.
Caterpillar cat 416 e backhoe loader (prefix sha) service repair manual (sha0...fjsjfkskefmem
The document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal process involves draining fluids, disconnecting wiring harnesses and hydraulic lines, and removing mounting hardware. The transmission is then lifted out of the machine. Disassembly separates the transmission into its major components like the torque converter, pump group, and valve groups through removal of mounting bolts and seals.
Caterpillar cat 416 d backhoe loader (prefix cxp) service repair manual (cxp0...fjsjfkskefmem
This document provides instructions to disconnect and separate the engine, torque converter, and transmission from a 416D backhoe loader. It outlines 41 steps to disconnect wiring harnesses, hoses, bolts and other components. The engine and transmission assembly weighs 680 kg and must be lifted and supported by tools during separation from the vehicle. Once separated, the transmission weighs 227 kg on its own.
13. FRAME & ATTACHING PARTS
31200730 TH336C, TH337C, TH406C, TH407C 1-7
Figure 1-2 Covers
Item Part Number Qty. Description Rev.
417-5978 Ref COVER PLATES, (TH336C & TH406C),
(not available to order, see items 1 thru 10 for service)
C
417-5979 Ref COVER PLATES, (TH337C & TH407C),
(not available to order, see items 1 thru 8 for service)
C
1 8T-4908 4 HEX HD CAPSCREW, M8X25, GR8.8, (torque to 28 Nm/20.65 lb-ft)
2 8T-4137 8 HEX HD CAPSCREW, M10X20, GR8.8, (torque to 55 Nm/40.56 lb-ft)
3 309-3997 4 WASHER, 8mm
4 8T-4121 8 WASHER, 10mm
5 316-1983 1 FRONT HYDRAULIC PANEL
6 316-1984 2 SIDE HYDRAULIC PANEL, (TH336C & TH406C)
316-1985 2 SIDE HYDRAULIC PANEL, (TH337C & TH407C)
7 316-1986 1 REAR HYDRAULIC PANEL
8 AR LOCTITE® 243TM
9 316-2015 1 REAR HYDRAULIC PANEL
10 420-9609 1 FRONT HYDRAULIC PANEL
397-9234 Ref ENGINE ENCLOSURE INSTALLATION, (92.5 kW & 106 kW),
(not available to order, see items 101 thru 128 for service)
J
396-6913 Ref ENGINE ENCLOSURE INSTALLATION, (75 kW),
(see items 101 thru 128 for service)
I
101 8T-4189 8 HEX HD CAPSCREW, M8X20, GR8.8, (torque to 28 Nm/20.65 lb-ft)
102 8T-4908 7 HEX HD CAPSCREW, M8X25, GR8.8, (torque to 14 Nm/10.32 lb-ft)
103 8T-7547 2 HEX HD CAPSCREW, M8X30, GR8.8, (torque to 14 Nm/10.32 lb-ft)
104 8T-4191 2 HEX HD CAPSCREW, M10X16, GR8.8, (torque to 55 Nm/40.56 lb-ft)
105 8T-4136 9 HEX HD CAPSCREW, M10X25, GR8.8, (torque to 55 Nm/40.56 lb-ft)
106 5C-7261 10 HEX NUT, M8X1.25, GR8, (torque to 28 Nm/20.65 lb-ft)
107 8T-4133 2 HEX NUT, M10X1.5, GR8
108 420-9613 2 ZSB JOINT
109 8T-4224 4 WASHER, 8mm
110 8T-4121 4 WASHER, 10mm
111 AR LOCTITE® 243TM
112 347-1639 1 GAS SPRING
113 394-1517 1 HOOD LATCH BRACKET
114 396-6908 1 REAR ENGINE ENCLOSURE COVER
115 394-2266 1 BASE PLATE ASSEMBLY
117 396-6909 1 HOOD
396-6912 1 HOOD, (with sound suppression)
118 416-8565 1 PLATE
119 467-9865 1 BASE PLATE
120 416-8567 1 GAS STRUT MOUNT BRACKET
121 428-9275 1 FRONT ENGINE ENCLOSURE COVER
122 8T-4195 1 HEX HD CAPSCREW, M10X30, GR8.8, (torque to 55 Nm/40.56 lb-ft)
123 309-3997 28 WASHER, 8mm
124 116-8517 10 WASHER, 10mm
125 309-9184 1 HEX LOCK NUT, M8X1.25, GR8
127 430-4118 1 SEAL
128 178-3336 2 RIPP NUT, M8, GR10
14. FRAME & ATTACHING PARTS
TH336C, TH337C, TH406C, TH407C 312007301-8
417-1223 1 TOOLBOX INSTALLATION, (not available to order, see items 201 thru 208 for
service)
B
201 8T-4189 2 HEX HD CAPSCREW, M8X20, GR8.8, (torque to 28 Nm/20.65 lb-ft)
202 454-6561 1 CLAMP
203 5C-7261 2 HEX NUT, M8X1.25, GR8
205 309-3997 5 WASHER, 8mm
206 AR LOCTITE®
243TM
207 417-1225 1 TOOLBOX
208 417-1224 1 WING BOLT, M8
Note: HARDWARE THAT COMES INTO CONTACT WITH ITEMS 114 & 121
SHOULD BE TORQUED TO 14 Nm/10.32 lb-ft)
Figure 1-2 Covers
Item Part Number Qty. Description Rev.
15. FRAME & ATTACHING PARTS
31200730 TH336C, TH337C, TH406C, TH407C 1-9
Figure 1-2 Covers
Item Part Number Qty. Description Rev.
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.