1981 johnson evinrude outboard 4.5 hp service repair manualfjsjefskekfmme
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
New holland cx6080 tier 3 combine harvester service repair manualfjsjefskekfmme
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering systems, frames, cabs, user platforms, environmental controls, lifting and leveling systems, and crop processing functions. Each section contains technical data, descriptions of functionality, diagnostic information, and service procedures for the machine's components and systems.
New holland cx6080 cx6090 tier 4 combine harvester service repair manualfjsjefskekfmme
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, feeding, threshing, separating, cleaning, storing, unloading and other crop processing functions. Each section contains technical data, functional descriptions, diagnostics and service instructions for the machine's various components and systems.
New holland cr9.90 combine harvesters service repair manualfjsjefskekfmme
This document is a service manual for various combine harvester models from CNH Industrial. It contains over 20 sections that provide information on systems of the combines like the engine, transmission, axles, brakes, hydraulics, steering, tracks, electrical systems, and more. Each section includes subsections that go into further detail on specific components. The manual also includes a table linking product models to their corresponding engine.
New holland cr9090 elevation combine harvesters service repair manualfjsjefskekfmme
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, axles, steering, braking, body, operator controls, crop processing, protection systems, and other subsystems. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during welding.
Caterpillar cat 903 d compact wheel loader (prefix mzy) service repair manual...fjsjefskekfmme
This service manual document provides instructions for removing and installing various components of a Caterpillar 903D compact wheel loader, including:
1. The steering frame lock to secure the machine frames before working on the loader.
2. The hydraulic tank which requires draining the tank, removing hoses/fittings, and lifting the tank off with a lifting device.
3. The joystick control and mounting located in the cab, which involves removing covers and disconnecting cables and harnesses.
4. The steering metering pump, which requires releasing hydraulic pressure, disconnecting hoses, and removing bolts to access the pump.
Caterpillar cat el240 b excavator (prefix 5wg) service repair manual (5wg0000...fjsjefskekfmme
This document provides instructions for removing and installing an engine oil cooler and disassembling and assembling an engine oil pump on an excavator model EL240B. The oil cooler removal procedure involves removing the oil cooler and gasket. The oil pump disassembly procedure involves using tools to remove various components like gears, shafts, springs and plungers from the oil pump body and housing. Precautions are provided to keep parts clean and contain fluids during the repair work.
The document provides instructions for removing and installing various components of a Caterpillar C2.4 Tier 4 Final engine, including:
1) The fuel manifold, requiring removal of bolts and lines and installation in reverse order.
2) Fuel injection lines, involving removal of clamps, hoses and tubes and installation in reverse order.
3) The exhaust gas recirculation cooler, requiring draining of coolant and removal of hoses, brackets and bolts and installation in reverse order.
4) The fuel injection pump, calling for removal of nuts, bolts and hoses and installation in reverse order.
5) Electronic unit injectors, involving removal of clips
1981 johnson evinrude outboard 4.5 hp service repair manualfjsjefskekfmme
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
New holland cx6080 tier 3 combine harvester service repair manualfjsjefskekfmme
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering systems, frames, cabs, user platforms, environmental controls, lifting and leveling systems, and crop processing functions. Each section contains technical data, descriptions of functionality, diagnostic information, and service procedures for the machine's components and systems.
New holland cx6080 cx6090 tier 4 combine harvester service repair manualfjsjefskekfmme
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, feeding, threshing, separating, cleaning, storing, unloading and other crop processing functions. Each section contains technical data, functional descriptions, diagnostics and service instructions for the machine's various components and systems.
New holland cr9.90 combine harvesters service repair manualfjsjefskekfmme
This document is a service manual for various combine harvester models from CNH Industrial. It contains over 20 sections that provide information on systems of the combines like the engine, transmission, axles, brakes, hydraulics, steering, tracks, electrical systems, and more. Each section includes subsections that go into further detail on specific components. The manual also includes a table linking product models to their corresponding engine.
New holland cr9090 elevation combine harvesters service repair manualfjsjefskekfmme
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, axles, steering, braking, body, operator controls, crop processing, protection systems, and other subsystems. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during welding.
Caterpillar cat 903 d compact wheel loader (prefix mzy) service repair manual...fjsjefskekfmme
This service manual document provides instructions for removing and installing various components of a Caterpillar 903D compact wheel loader, including:
1. The steering frame lock to secure the machine frames before working on the loader.
2. The hydraulic tank which requires draining the tank, removing hoses/fittings, and lifting the tank off with a lifting device.
3. The joystick control and mounting located in the cab, which involves removing covers and disconnecting cables and harnesses.
4. The steering metering pump, which requires releasing hydraulic pressure, disconnecting hoses, and removing bolts to access the pump.
Caterpillar cat el240 b excavator (prefix 5wg) service repair manual (5wg0000...fjsjefskekfmme
This document provides instructions for removing and installing an engine oil cooler and disassembling and assembling an engine oil pump on an excavator model EL240B. The oil cooler removal procedure involves removing the oil cooler and gasket. The oil pump disassembly procedure involves using tools to remove various components like gears, shafts, springs and plungers from the oil pump body and housing. Precautions are provided to keep parts clean and contain fluids during the repair work.
The document provides instructions for removing and installing various components of a Caterpillar C2.4 Tier 4 Final engine, including:
1) The fuel manifold, requiring removal of bolts and lines and installation in reverse order.
2) Fuel injection lines, involving removal of clamps, hoses and tubes and installation in reverse order.
3) The exhaust gas recirculation cooler, requiring draining of coolant and removal of hoses, brackets and bolts and installation in reverse order.
4) The fuel injection pump, calling for removal of nuts, bolts and hoses and installation in reverse order.
5) Electronic unit injectors, involving removal of clips
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...fjsjefskekfmme
This document provides instructions for removing, disassembling, assembling, and installing an engine oil pump on a Caterpillar EL200B excavator. The removal procedure involves removing the engine oil pan and then the oil pump. The disassembly procedure details removing various components of the oil pump including gears, shafts, and springs. The assembly procedure specifies lubricating parts and installing components in reverse order of removal. Finally, the installation procedure indicates ensuring clean mounting surfaces and installing the oil pump.
Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...fjsjefskekfmme
This document provides instructions for removing the automatic timing advance from an E300B excavator engine. It describes:
1) Using various tools to turn the crankshaft and camshaft to specific positions to aid in removal.
2) Loosening a bolt to separate the automatic timing advance gear from the fuel pump camshaft.
3) Removing the automatic timing advance unit from the engine.
Proper positioning of engine components and use of the specified tools is necessary for safe and effective removal of the automatic timing advance.
Caterpillar cat 903 c compact wheel loader (prefix w6t) service repair manual...fjsjefskekfmme
The document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader. It describes procedures for removing and installing fuel injection lines, nozzles, and the governor/camshaft assembly. Specific steps include removing retaining rings, sleeves, and press-fitting bearings. Torque specifications and notices about cleanliness and fluid containment are provided.
Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...fjsjefskekfmme
This document provides instructions for removing and installing the front cover on an excavator engine. It begins by noting the tools needed and safety precautions. The removal procedure instructs to remove the bolts from the front cover and remove the cover and gasket. The installation procedure instructs to install a new gasket on the cover and then install the gasket and cover on the front of the engine.
Caterpillar cat 903 c compact wheel loader (prefix mw4) service repair manual...fjsjefskekfmme
This document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader powered by a C2.4 engine. It includes procedures for removing and installing fuel injection lines and nozzles, as well as disassembling, assembling, removing and installing the governor and camshaft. Detailed illustrations accompany each step-by-step procedure to ensure correct part placement and tool usage. Proper cleanup and containment of fluids is emphasized throughout.
Caterpillar cat e240 b excavator (prefix 8sf) service repair manual (8sf00001...fjsjefskekfmme
This document provides instructions for removing and installing the fuel transfer pump on an excavator model E240B powered by a 3116 engine. The removal procedure involves holding the spring loaded cover in place and removing bolts to access internal components. Components like the filter screen, seals, springs and fittings are then removed. The installation procedure is not described but presumably involves reversing the removal steps. Precautions are provided to contain fluids and prevent contamination.
This document provides instructions for removing and installing an implement pump on a 527 track skidder. It outlines the disassembly and assembly procedures in detail with illustrations. Safety notices are included to release pressure from the hydraulic system before removal and to relieve spring tension carefully during disassembly. The multi-page document thoroughly explains each step to disassemble and reassemble the implement pump.
This document provides instructions for removing and installing various components on a Caterpillar 527 Track Skidder, including the turbocharger, water temperature regulator, and radiator. The removal and installation procedures are described in detail in a step-by-step format and include illustrations. Safety and contamination prevention notices are also provided throughout the document.
Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...fjsjefskekfmme
This document provides instructions for disassembling and assembling the travel drives of an E120B excavator. It describes removing and disassembling the travel drive and travel motor components. It then describes cleaning and inspecting the parts and reassembling the travel drive, which involves determining shim sizes, installing seals and gears, and torquing bolts to the specified values. The goal is to properly disassemble, clean, measure, and reassemble the travel drive components.
This document provides instructions for removing and installing the fuel priming pump and fuel filter base on a Caterpillar 527 Track Skidder with a 3304 engine. It describes:
- Removing the fuel priming pump by turning off the fuel supply, removing bolts/washers, disconnecting tubes, and removing the pump and gasket.
- Installing the fuel priming pump by installing the gasket, bolts/washers, connecting tubes, and turning on the fuel supply.
- Removing the fuel filter base by removing the fuel filter, disconnecting fuel lines, and removing bolts/washers/base/gasket.
- Installing the fuel filter base by installing the
Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...fjsjefskekfmme
The document is a service manual that provides specifications and operating instructions for the travel drive and motor of an E70B excavator. It describes the main components of the travel drive and motor system, including the axial plunger motor, counter-balance valve, parking brake, and reduction gears. It explains how each component functions and interacts with the others to convert hydraulic pressure into rotational force to power the tracks and control functions like braking and reversing.
This document provides instructions for connecting and disconnecting tracks on a 517 Track Skidder. It describes 13 steps for the connection procedure, including using tools to lift the machine, engage the track bushings with the sprocket segments, and tighten the master link. It also provides procedures for removing and installing sprocket segments, disassembling and assembling track rollers, and installing Duo-Cone seals.
This document provides instructions for servicing the automatic timing advance on a 517 TRACK SKIDDER model powered by a 3304 engine. It describes removing the fuel injection pump housing and governor, disassembling the housing, and reassembling the housing. The procedures involve using various tools to install and remove parts like bearings, lifters, and seals. Technicians are advised to keep parts clean and apply engine oil during assembly.
Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...fjsjefskekfmme
The document provides instructions to remove the front idler, recoil spring, and hydraulic track adjuster from an excavator as a 3-part process. It describes separating the track assemblies first, then using lifting devices to support and remove the components as a unit or individually from the track roller frame. Personal injury warnings are given regarding the compressed spring force involved.
Caterpillar cat 428 d backhoe loader (prefix bll) service repair manual (bll0...fjsjefskekfmme
This document provides instructions for assembling the transmission of a 428D backhoe loader. It describes installing various transmission components like bearings, gears, shafts, and cases in multiple steps. It also explains how to install the fully assembled transmission in the machine and connect relevant components. The assembly procedure involves cleaning parts, applying oil, heating bearings, using various tools, and verifying clearances during installation.
This document provides instructions for servicing components of a 245 excavator, including:
- Removing and installing the bucket and boom pilot control valve and stick and swing pilot control valve.
- Disassembling and assembling pilot control valves.
- Removing and installing the speed and direction pilot control valve.
- Disassembling and assembling the speed and direction pilot control valve.
- Removing and installing line relief valves from control valves.
Caterpillar cat 428 c backhoe loader (prefix 8rn) service repair manual (8rn0...fjsjefskekfmme
This document provides instructions for removing and installing a crankshaft pulley on a Caterpillar 3054 engine. It begins by listing the required tools. The removal procedure involves removing the V-belts, then removing three bolts and the thrust block that holds the pulley in position. The installation procedure specifies cleaning parts and installing in the reverse order, tightening the bolts to the specified torque.
Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...fjsjefskekfmme
The document provides instructions for removing and installing inlet and exhaust valve springs on a Caterpillar 236D Skid Steer Loader. It describes using a valve spring compressor tool to compress the springs and remove the valve keepers and springs. When installing new springs, the document specifies installing them with the smaller pitch end downward. Safety precautions are provided to avoid injury from parts propelled by spring force.
The document provides instructions for disassembling the piston pump of a Caterpillar 236B3 skid steer loader. It describes removing hoses, fittings, covers, springs, seals, retainers, shafts and other components. Detailed steps and illustrations are given to disassemble the pump housing, actuator assembly, covers and internal parts while taking safety precautions for released spring forces. Measurements are recorded for reassembly.
Caterpillar cat 320 c ln excavator (prefix axk) service repair manual (axk000...fjsjefskekfmme
This document provides instructions for removing and installing the engine oil pump on a 320C LN excavator powered by a 3066 engine. It describes removing the front housing, cover, gears, seals, and spindle. It then describes installing these components in reverse order, including heating some parts for easier installation. Precautions are provided regarding cleaning, fluids, and personal protective equipment.
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...fjsjefskekfmme
This document provides instructions for removing, disassembling, assembling, and installing an engine oil pump on a Caterpillar EL200B excavator. The removal procedure involves removing the engine oil pan and then the oil pump. The disassembly procedure details removing various components of the oil pump including gears, shafts, and springs. The assembly procedure specifies lubricating parts and installing components in reverse order of removal. Finally, the installation procedure indicates ensuring clean mounting surfaces and installing the oil pump.
Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...fjsjefskekfmme
This document provides instructions for removing the automatic timing advance from an E300B excavator engine. It describes:
1) Using various tools to turn the crankshaft and camshaft to specific positions to aid in removal.
2) Loosening a bolt to separate the automatic timing advance gear from the fuel pump camshaft.
3) Removing the automatic timing advance unit from the engine.
Proper positioning of engine components and use of the specified tools is necessary for safe and effective removal of the automatic timing advance.
Caterpillar cat 903 c compact wheel loader (prefix w6t) service repair manual...fjsjefskekfmme
The document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader. It describes procedures for removing and installing fuel injection lines, nozzles, and the governor/camshaft assembly. Specific steps include removing retaining rings, sleeves, and press-fitting bearings. Torque specifications and notices about cleanliness and fluid containment are provided.
Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...fjsjefskekfmme
This document provides instructions for removing and installing the front cover on an excavator engine. It begins by noting the tools needed and safety precautions. The removal procedure instructs to remove the bolts from the front cover and remove the cover and gasket. The installation procedure instructs to install a new gasket on the cover and then install the gasket and cover on the front of the engine.
Caterpillar cat 903 c compact wheel loader (prefix mw4) service repair manual...fjsjefskekfmme
This document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader powered by a C2.4 engine. It includes procedures for removing and installing fuel injection lines and nozzles, as well as disassembling, assembling, removing and installing the governor and camshaft. Detailed illustrations accompany each step-by-step procedure to ensure correct part placement and tool usage. Proper cleanup and containment of fluids is emphasized throughout.
Caterpillar cat e240 b excavator (prefix 8sf) service repair manual (8sf00001...fjsjefskekfmme
This document provides instructions for removing and installing the fuel transfer pump on an excavator model E240B powered by a 3116 engine. The removal procedure involves holding the spring loaded cover in place and removing bolts to access internal components. Components like the filter screen, seals, springs and fittings are then removed. The installation procedure is not described but presumably involves reversing the removal steps. Precautions are provided to contain fluids and prevent contamination.
This document provides instructions for removing and installing an implement pump on a 527 track skidder. It outlines the disassembly and assembly procedures in detail with illustrations. Safety notices are included to release pressure from the hydraulic system before removal and to relieve spring tension carefully during disassembly. The multi-page document thoroughly explains each step to disassemble and reassemble the implement pump.
This document provides instructions for removing and installing various components on a Caterpillar 527 Track Skidder, including the turbocharger, water temperature regulator, and radiator. The removal and installation procedures are described in detail in a step-by-step format and include illustrations. Safety and contamination prevention notices are also provided throughout the document.
Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...fjsjefskekfmme
This document provides instructions for disassembling and assembling the travel drives of an E120B excavator. It describes removing and disassembling the travel drive and travel motor components. It then describes cleaning and inspecting the parts and reassembling the travel drive, which involves determining shim sizes, installing seals and gears, and torquing bolts to the specified values. The goal is to properly disassemble, clean, measure, and reassemble the travel drive components.
This document provides instructions for removing and installing the fuel priming pump and fuel filter base on a Caterpillar 527 Track Skidder with a 3304 engine. It describes:
- Removing the fuel priming pump by turning off the fuel supply, removing bolts/washers, disconnecting tubes, and removing the pump and gasket.
- Installing the fuel priming pump by installing the gasket, bolts/washers, connecting tubes, and turning on the fuel supply.
- Removing the fuel filter base by removing the fuel filter, disconnecting fuel lines, and removing bolts/washers/base/gasket.
- Installing the fuel filter base by installing the
Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...fjsjefskekfmme
The document is a service manual that provides specifications and operating instructions for the travel drive and motor of an E70B excavator. It describes the main components of the travel drive and motor system, including the axial plunger motor, counter-balance valve, parking brake, and reduction gears. It explains how each component functions and interacts with the others to convert hydraulic pressure into rotational force to power the tracks and control functions like braking and reversing.
This document provides instructions for connecting and disconnecting tracks on a 517 Track Skidder. It describes 13 steps for the connection procedure, including using tools to lift the machine, engage the track bushings with the sprocket segments, and tighten the master link. It also provides procedures for removing and installing sprocket segments, disassembling and assembling track rollers, and installing Duo-Cone seals.
This document provides instructions for servicing the automatic timing advance on a 517 TRACK SKIDDER model powered by a 3304 engine. It describes removing the fuel injection pump housing and governor, disassembling the housing, and reassembling the housing. The procedures involve using various tools to install and remove parts like bearings, lifters, and seals. Technicians are advised to keep parts clean and apply engine oil during assembly.
Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...fjsjefskekfmme
The document provides instructions to remove the front idler, recoil spring, and hydraulic track adjuster from an excavator as a 3-part process. It describes separating the track assemblies first, then using lifting devices to support and remove the components as a unit or individually from the track roller frame. Personal injury warnings are given regarding the compressed spring force involved.
Caterpillar cat 428 d backhoe loader (prefix bll) service repair manual (bll0...fjsjefskekfmme
This document provides instructions for assembling the transmission of a 428D backhoe loader. It describes installing various transmission components like bearings, gears, shafts, and cases in multiple steps. It also explains how to install the fully assembled transmission in the machine and connect relevant components. The assembly procedure involves cleaning parts, applying oil, heating bearings, using various tools, and verifying clearances during installation.
This document provides instructions for servicing components of a 245 excavator, including:
- Removing and installing the bucket and boom pilot control valve and stick and swing pilot control valve.
- Disassembling and assembling pilot control valves.
- Removing and installing the speed and direction pilot control valve.
- Disassembling and assembling the speed and direction pilot control valve.
- Removing and installing line relief valves from control valves.
Caterpillar cat 428 c backhoe loader (prefix 8rn) service repair manual (8rn0...fjsjefskekfmme
This document provides instructions for removing and installing a crankshaft pulley on a Caterpillar 3054 engine. It begins by listing the required tools. The removal procedure involves removing the V-belts, then removing three bolts and the thrust block that holds the pulley in position. The installation procedure specifies cleaning parts and installing in the reverse order, tightening the bolts to the specified torque.
Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...fjsjefskekfmme
The document provides instructions for removing and installing inlet and exhaust valve springs on a Caterpillar 236D Skid Steer Loader. It describes using a valve spring compressor tool to compress the springs and remove the valve keepers and springs. When installing new springs, the document specifies installing them with the smaller pitch end downward. Safety precautions are provided to avoid injury from parts propelled by spring force.
The document provides instructions for disassembling the piston pump of a Caterpillar 236B3 skid steer loader. It describes removing hoses, fittings, covers, springs, seals, retainers, shafts and other components. Detailed steps and illustrations are given to disassemble the pump housing, actuator assembly, covers and internal parts while taking safety precautions for released spring forces. Measurements are recorded for reassembly.
Caterpillar cat 320 c ln excavator (prefix axk) service repair manual (axk000...fjsjefskekfmme
This document provides instructions for removing and installing the engine oil pump on a 320C LN excavator powered by a 3066 engine. It describes removing the front housing, cover, gears, seals, and spindle. It then describes installing these components in reverse order, including heating some parts for easier installation. Precautions are provided regarding cleaning, fluids, and personal protective equipment.
13. FRAME & ATTACHING PARTS
31200730 TH336C, TH337C, TH406C, TH407C 1-7
Figure 1-2 Covers
Item Part Number Qty. Description Rev.
417-5978 Ref COVER PLATES, (TH336C & TH406C),
(not available to order, see items 1 thru 10 for service)
C
417-5979 Ref COVER PLATES, (TH337C & TH407C),
(not available to order, see items 1 thru 8 for service)
C
1 8T-4908 4 HEX HD CAPSCREW, M8X25, GR8.8, (torque to 28 Nm/20.65 lb-ft)
2 8T-4137 8 HEX HD CAPSCREW, M10X20, GR8.8, (torque to 55 Nm/40.56 lb-ft)
3 309-3997 4 WASHER, 8mm
4 8T-4121 8 WASHER, 10mm
5 316-1983 1 FRONT HYDRAULIC PANEL
6 316-1984 2 SIDE HYDRAULIC PANEL, (TH336C & TH406C)
316-1985 2 SIDE HYDRAULIC PANEL, (TH337C & TH407C)
7 316-1986 1 REAR HYDRAULIC PANEL
8 AR LOCTITE® 243TM
9 316-2015 1 REAR HYDRAULIC PANEL
10 420-9609 1 FRONT HYDRAULIC PANEL
397-9234 Ref ENGINE ENCLOSURE INSTALLATION, (92.5 kW & 106 kW),
(not available to order, see items 101 thru 128 for service)
J
396-6913 Ref ENGINE ENCLOSURE INSTALLATION, (75 kW),
(see items 101 thru 128 for service)
I
101 8T-4189 8 HEX HD CAPSCREW, M8X20, GR8.8, (torque to 28 Nm/20.65 lb-ft)
102 8T-4908 7 HEX HD CAPSCREW, M8X25, GR8.8, (torque to 14 Nm/10.32 lb-ft)
103 8T-7547 2 HEX HD CAPSCREW, M8X30, GR8.8, (torque to 14 Nm/10.32 lb-ft)
104 8T-4191 2 HEX HD CAPSCREW, M10X16, GR8.8, (torque to 55 Nm/40.56 lb-ft)
105 8T-4136 9 HEX HD CAPSCREW, M10X25, GR8.8, (torque to 55 Nm/40.56 lb-ft)
106 5C-7261 10 HEX NUT, M8X1.25, GR8, (torque to 28 Nm/20.65 lb-ft)
107 8T-4133 2 HEX NUT, M10X1.5, GR8
108 420-9613 2 ZSB JOINT
109 8T-4224 4 WASHER, 8mm
110 8T-4121 4 WASHER, 10mm
111 AR LOCTITE® 243TM
112 347-1639 1 GAS SPRING
113 394-1517 1 HOOD LATCH BRACKET
114 396-6908 1 REAR ENGINE ENCLOSURE COVER
115 394-2266 1 BASE PLATE ASSEMBLY
117 396-6909 1 HOOD
396-6912 1 HOOD, (with sound suppression)
118 416-8565 1 PLATE
119 467-9865 1 BASE PLATE
120 416-8567 1 GAS STRUT MOUNT BRACKET
121 428-9275 1 FRONT ENGINE ENCLOSURE COVER
122 8T-4195 1 HEX HD CAPSCREW, M10X30, GR8.8, (torque to 55 Nm/40.56 lb-ft)
123 309-3997 28 WASHER, 8mm
124 116-8517 10 WASHER, 10mm
125 309-9184 1 HEX LOCK NUT, M8X1.25, GR8
127 430-4118 1 SEAL
128 178-3336 2 RIPP NUT, M8, GR10
14. FRAME & ATTACHING PARTS
TH336C, TH337C, TH406C, TH407C 312007301-8
417-1223 1 TOOLBOX INSTALLATION, (not available to order, see items 201 thru 208 for
service)
B
201 8T-4189 2 HEX HD CAPSCREW, M8X20, GR8.8, (torque to 28 Nm/20.65 lb-ft)
202 454-6561 1 CLAMP
203 5C-7261 2 HEX NUT, M8X1.25, GR8
205 309-3997 5 WASHER, 8mm
206 AR LOCTITE®
243TM
207 417-1225 1 TOOLBOX
208 417-1224 1 WING BOLT, M8
Note: HARDWARE THAT COMES INTO CONTACT WITH ITEMS 114 & 121
SHOULD BE TORQUED TO 14 Nm/10.32 lb-ft)
Figure 1-2 Covers
Item Part Number Qty. Description Rev.
15. FRAME & ATTACHING PARTS
31200730 TH336C, TH337C, TH406C, TH407C 1-9
Figure 1-2 Covers
Item Part Number Qty. Description Rev.
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.