This document is a notification of exam results for Syed Mohammed Izas Syed Abuthanir for the NEBOSH International General Certificate in Occupational Health and Safety. It indicates that he passed all three exams, achieving marks of 98, 79, and 74 respectively. With an overall mark of 251, he was awarded a Distinction grade for the qualification. The notification provides information on certification timelines and procedures for resitting exams or requesting enquiries about results.
This document is a catalogue for Cembre S.p.A., an Italian manufacturer of electrical connectors and accessories. It provides an overview of the company's quality management system and certifications in ISO 9001 and other standards. The catalogue then lists and describes the various product families and individual products offered by Cembre, including insulated and uninsulated terminals, lugs, blocks, and other electrical connection devices.
Trapping and Crushing in MEWPS - Guidance from Strategic Forum Plant Safety ...Alan Bassett
The document provides guidance for avoiding trapping and crushing injuries when using mobile elevating work platforms (MEWPs). It discusses:
1. Planning work that involves MEWPs, including conducting risk assessments, selecting the appropriate equipment, and developing safe work procedures and emergency plans.
2. Supervising and monitoring work involving MEWPs to ensure safe practices are followed.
3. Ensuring only competent, trained operators use MEWPs through proper training programs and record keeping of training completed.
4. Considerations for adding additional equipment to MEWPs and how to evaluate potential safety impacts.
This document outlines an electrical safety policy and procedures for Midwest Manufacturing. It aims to establish standards to prevent electrical hazards and ensure compliance with OSHA and NFPA regulations. The policy requires that electrical circuits be de-energized before work, unless doing so would increase hazards or is infeasible. It assigns responsibilities to different departments to implement the policy and train employees. The procedures section specifies requirements for inspecting equipment, locking out tag out procedures, use of personal protective equipment, and energized work permits.
Safety in the workplace involves controlling recognized hazards through proper protective equipment, keeping the work area clean and organized, and maintaining a positive attitude to reduce risks to an acceptable level.
Mr. Saurabh Shirarkar was employed as a "Process Development and Vendor Quality" at Karmyog Engineers Pvt Ltd from April 7, 2012 to the present date. During his employment, he was found to be very sincere and hardworking in his duties. The company appreciated his commitment and contribution during this period. The company wishes him success for further studies and assignments.
This document is a notification of exam results for Syed Mohammed Izas Syed Abuthanir for the NEBOSH International General Certificate in Occupational Health and Safety. It indicates that he passed all three exams, achieving marks of 98, 79, and 74 respectively. With an overall mark of 251, he was awarded a Distinction grade for the qualification. The notification provides information on certification timelines and procedures for resitting exams or requesting enquiries about results.
This document is a catalogue for Cembre S.p.A., an Italian manufacturer of electrical connectors and accessories. It provides an overview of the company's quality management system and certifications in ISO 9001 and other standards. The catalogue then lists and describes the various product families and individual products offered by Cembre, including insulated and uninsulated terminals, lugs, blocks, and other electrical connection devices.
Trapping and Crushing in MEWPS - Guidance from Strategic Forum Plant Safety ...Alan Bassett
The document provides guidance for avoiding trapping and crushing injuries when using mobile elevating work platforms (MEWPs). It discusses:
1. Planning work that involves MEWPs, including conducting risk assessments, selecting the appropriate equipment, and developing safe work procedures and emergency plans.
2. Supervising and monitoring work involving MEWPs to ensure safe practices are followed.
3. Ensuring only competent, trained operators use MEWPs through proper training programs and record keeping of training completed.
4. Considerations for adding additional equipment to MEWPs and how to evaluate potential safety impacts.
This document outlines an electrical safety policy and procedures for Midwest Manufacturing. It aims to establish standards to prevent electrical hazards and ensure compliance with OSHA and NFPA regulations. The policy requires that electrical circuits be de-energized before work, unless doing so would increase hazards or is infeasible. It assigns responsibilities to different departments to implement the policy and train employees. The procedures section specifies requirements for inspecting equipment, locking out tag out procedures, use of personal protective equipment, and energized work permits.
Safety in the workplace involves controlling recognized hazards through proper protective equipment, keeping the work area clean and organized, and maintaining a positive attitude to reduce risks to an acceptable level.
Mr. Saurabh Shirarkar was employed as a "Process Development and Vendor Quality" at Karmyog Engineers Pvt Ltd from April 7, 2012 to the present date. During his employment, he was found to be very sincere and hardworking in his duties. The company appreciated his commitment and contribution during this period. The company wishes him success for further studies and assignments.
Surface mount technology is a method of assembling circuit boards where components are attached to the surface of the board rather than inserted into holes. There are three main types of surface mount assemblies depending on where components are placed on the board. The key processes for surface mount technology include surface mount design, solder paste application, component placement, soldering, cleaning, and potential rework. Infrared and hot gas soldering are two common techniques used for soldering surface mount components.
This document provides an overview of lockout/tagout (LOTO) training. It defines key terms like authorized employee, affected employee, and hazardous energy sources. It explains when written LOTO procedures are required and the general LOTO procedure to follow. Group LOTO types, shift changes, and the responsibilities of subcontractors are also outlined. The document emphasizes the importance of LOTO for safety and concludes by thanking students for learning about this lifesaving practice.
The document discusses the purpose and procedures of a work permit system. It is intended to ensure that all work is carried out safely by defining responsibilities, requiring appropriate training, and providing safety equipment. A work permit specifies the conditions and safety procedures that must be followed for particular jobs. It is required for non-routine and hazardous routine work, and when third parties are involved. A work permit must be prepared with relevant parties and approved before work begins to ensure all hazards are addressed.
The document discusses the history and development of artificial intelligence over the past several decades. It describes early work in the field starting in the 1950s and progress in areas such as problem solving, game playing, and machine learning. Recent advances in deep learning now allow AI systems to perform complex tasks like visual perception and language translation.
The document outlines the HSE (Health, Safety, and Environment) work cycles implemented at construction sites in Japan and adopted by many other construction sites. It describes the daily, weekly, and monthly HSE work cycles which include activities like morning safety meetings, site inspections, safety process discussions, and safety education. The goal is to actively promote safety improvement, prevent industrial accidents, and ensure a total HSE solution through regular inspections, voluntary checks, meetings and education on safety practices and accident case studies. Following these HSE work cycles aims to create a safe and efficient work environment.
A safe system of work (SSW) is a formal procedure based on a systematic examination of work in order to identify the hazards, it defines safe methods of working which eliminate those hazards or minimize the risk associate with them as low as is reasonably practicable.
The document discusses personal protective equipment (PPE) for welding. It identifies various types of PPE including safety glasses, respirators, work boots, welding gloves, hard hats, earmuffs, welding helmets, leather aprons, welding pants, leggings, and protective arm sleeves. The PPE are meant to protect different parts of the body from hazards like flying debris, hazardous chemicals, extreme noise, heat, and sparks during welding work. The document also provides images and descriptions of the appropriate use of each type of PPE.
This document provides information and safety tips regarding electrical safety both indoors and outdoors. It advises checking electrical cords and outlets for wear, keeping appliances away from water, using power strips safely, and unplugging appliances after use. It also outlines safety procedures for electrical fires, shocks, downed power lines, and lightning, and recommends building an emergency kit for power outages. The overall message is to be aware of potential electrical hazards and follow precautions to prevent electrical injuries or fires.
This new employee safety orientation covers various workplace safety topics including understanding the employee's role in safety, identifying and reporting hazards, preventing and responding to fires and accidents, evacuation procedures, ergonomics, safe lifting techniques, use of personal protective equipment, electrical and chemical hazards. The goal is to provide employees with the necessary safety information and training to work safely and help maintain an accident-free workplace.
Pcb design best practices for more reliable manufacturingScreaming Circuits
This document discusses best practices for PCB design to improve manufacturing reliability. It identifies five common problems: 1) via in pad, 2) QFN center pad issues, 3) incorrect footprints and markings, 4) thermal manufacturing issues, and 5) bill of materials explosions. Each issue is explained in detail with examples of both correct and incorrect design approaches. The document emphasizes that aspects that don't impact larger boards can cause failures at smaller scales, and provides tips for via filling, stencil segmentation, thermal relief, and managing component counts.
OSID - Detección de Incendios por Barrera OpticaXtralisSpain
Es una nueva tecnología de detección de humo, similar a las barreras de infrarrojos actuales, pero con sustanciales diferencias:
El receptor es de tipo óptico, más parecido a una cámara de video que a un receptor de barrera tradicional, capaz de identificar hasta 7 emisores en su campo de visión, formando así varias líneas de detección en forma de abanicos horizontales o verticales que permiten una mayor gama de aplicaciones que las barreras hasta ahora conocidas.
Los emisores se alimentan mediante una pila de litio de 10 años de duración y comunican sus parámetros al receptor mediante la codificación de sus fuentes de luz, a través de la cual le transmiten constantemente desde el estado de su batería hasta su número de serie, por lo que no necesitan ser cableados entre ellos.
La luz que forma cada barrera está compuesta por una transmisión infrarroja y otra ultravioleta, lo que le permite al sistema identificar con precisión si lo que está oscureciendo la transmisión es calor, humo, polvo, vapor de agua u objetos, y actuando en consecuencia, esta diferenciación es tan precisa que permite que la barrera se ajuste a una sensibilidad mucho más alta que la de las barreras tradicionales, ya que no tiene riesgo de producir falsas alarmas por contaminación.
Las barreras OSID (Open Space Image Detection) están pensadas para grandes ambientes abiertos en donde otras tecnologías serían problemáticas por su altura, superficie y compartimentación vertical, como sucede en los atrios de centros comerciales donde existen plantas abiertas al atrio.
El receptor está disponible en tres ángulos de visión, 10º, 40º y 80º mientras que los emisores están disponibles en dos potencias; combinando ángulos y potencias podemos realizar un diseño en abanico para grandes extensiones, como almacenes o estaciones a diseños de hasta 150 m. de longitud para largos pasillos o túneles.
Económicamente, los sistemas OSID son muy competitivos y ofrecen una alternativa con ventajas adicionales, total rechazo a falsas alarmas, alineación constante y automática, mayor sensibilidad que otras tecnologías similares, menor mano de obra, menores costes de instalación, mantenimiento más económico y direccionabilidad de cada haz, hasta el punto de ser capaces de triangular el origen del humo, en caso de realizar instalaciones cruzadas.
This document discusses personal protective equipment (PPE) and its uses. It provides examples of common types of PPE that protect the head, eyes, face, hearing, feet, hands, and body. For each body part, it outlines hazards that PPE protects against and when employers must provide specific types of PPE. The document stresses that employers must implement a complete PPE program that involves hazard assessment, controls, PPE selection and use, training, and compliance.
Check Point provides cybersecurity solutions with robust architectures that offer uncompromised security and operational efficiency. It has four key differentiators, including innovative real-time prevention technologies, the most efficient security management, a proven track record of security excellence through third-party ratings, and an extreme sense of urgency with the most secure architecture and fastest response times to vulnerabilities.
Kidde WHDR Kitchen Hood Fire Protection End User Training.pdfEdyDJYoung
The document provides instructions for operating and maintaining a Kidde WHDR kitchen hood fire suppression system from Citra Inti Semesta. It describes how the system works to discharge a wet agent through nozzles to extinguish fires. It outlines steps to take in the event of a fire, including evacuating, manually activating the system if it does not automatically discharge, calling the fire department, and using a fire extinguisher if safe to do. The document also lists maintenance and safety procedures like regular cleaning, inspections, and following emergency procedures to protect against kitchen fires.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help alleviate symptoms of mental illness and boost overall mental well-being.
X Ray inspection of Plated Throughhole Devices Using X-RayBob Wettermann
X-ray inspection can be used to determine and confirm hole fill which is a non-inspectable criteria for PTH devices. Industry standards are reviewed as well as sample x-ray images are provided. Call solder.net for more assistance.
This document provides guidance on designing low voltage non-motor industrial feeder circuits for Saudi Aramco. It discusses factors that affect calculating the ampacity, short circuit, and voltage drop ratings of feeder conductors. These factors include conductor material type, ambient temperature, conductor temperature rating, number of conductors in a raceway, and conductor size. The document also covers selecting protective devices, raceway sizes, and resources to use for feeder circuit design.
Learn how to implement Behavioral Based Safety system (BBS) at your workplace; what are the benefits of BBS, what are the roles of the employees and more.
Surface mount technology is a method of assembling circuit boards where components are attached to the surface of the board rather than inserted into holes. There are three main types of surface mount assemblies depending on where components are placed on the board. The key processes for surface mount technology include surface mount design, solder paste application, component placement, soldering, cleaning, and potential rework. Infrared and hot gas soldering are two common techniques used for soldering surface mount components.
This document provides an overview of lockout/tagout (LOTO) training. It defines key terms like authorized employee, affected employee, and hazardous energy sources. It explains when written LOTO procedures are required and the general LOTO procedure to follow. Group LOTO types, shift changes, and the responsibilities of subcontractors are also outlined. The document emphasizes the importance of LOTO for safety and concludes by thanking students for learning about this lifesaving practice.
The document discusses the purpose and procedures of a work permit system. It is intended to ensure that all work is carried out safely by defining responsibilities, requiring appropriate training, and providing safety equipment. A work permit specifies the conditions and safety procedures that must be followed for particular jobs. It is required for non-routine and hazardous routine work, and when third parties are involved. A work permit must be prepared with relevant parties and approved before work begins to ensure all hazards are addressed.
The document discusses the history and development of artificial intelligence over the past several decades. It describes early work in the field starting in the 1950s and progress in areas such as problem solving, game playing, and machine learning. Recent advances in deep learning now allow AI systems to perform complex tasks like visual perception and language translation.
The document outlines the HSE (Health, Safety, and Environment) work cycles implemented at construction sites in Japan and adopted by many other construction sites. It describes the daily, weekly, and monthly HSE work cycles which include activities like morning safety meetings, site inspections, safety process discussions, and safety education. The goal is to actively promote safety improvement, prevent industrial accidents, and ensure a total HSE solution through regular inspections, voluntary checks, meetings and education on safety practices and accident case studies. Following these HSE work cycles aims to create a safe and efficient work environment.
A safe system of work (SSW) is a formal procedure based on a systematic examination of work in order to identify the hazards, it defines safe methods of working which eliminate those hazards or minimize the risk associate with them as low as is reasonably practicable.
The document discusses personal protective equipment (PPE) for welding. It identifies various types of PPE including safety glasses, respirators, work boots, welding gloves, hard hats, earmuffs, welding helmets, leather aprons, welding pants, leggings, and protective arm sleeves. The PPE are meant to protect different parts of the body from hazards like flying debris, hazardous chemicals, extreme noise, heat, and sparks during welding work. The document also provides images and descriptions of the appropriate use of each type of PPE.
This document provides information and safety tips regarding electrical safety both indoors and outdoors. It advises checking electrical cords and outlets for wear, keeping appliances away from water, using power strips safely, and unplugging appliances after use. It also outlines safety procedures for electrical fires, shocks, downed power lines, and lightning, and recommends building an emergency kit for power outages. The overall message is to be aware of potential electrical hazards and follow precautions to prevent electrical injuries or fires.
This new employee safety orientation covers various workplace safety topics including understanding the employee's role in safety, identifying and reporting hazards, preventing and responding to fires and accidents, evacuation procedures, ergonomics, safe lifting techniques, use of personal protective equipment, electrical and chemical hazards. The goal is to provide employees with the necessary safety information and training to work safely and help maintain an accident-free workplace.
Pcb design best practices for more reliable manufacturingScreaming Circuits
This document discusses best practices for PCB design to improve manufacturing reliability. It identifies five common problems: 1) via in pad, 2) QFN center pad issues, 3) incorrect footprints and markings, 4) thermal manufacturing issues, and 5) bill of materials explosions. Each issue is explained in detail with examples of both correct and incorrect design approaches. The document emphasizes that aspects that don't impact larger boards can cause failures at smaller scales, and provides tips for via filling, stencil segmentation, thermal relief, and managing component counts.
OSID - Detección de Incendios por Barrera OpticaXtralisSpain
Es una nueva tecnología de detección de humo, similar a las barreras de infrarrojos actuales, pero con sustanciales diferencias:
El receptor es de tipo óptico, más parecido a una cámara de video que a un receptor de barrera tradicional, capaz de identificar hasta 7 emisores en su campo de visión, formando así varias líneas de detección en forma de abanicos horizontales o verticales que permiten una mayor gama de aplicaciones que las barreras hasta ahora conocidas.
Los emisores se alimentan mediante una pila de litio de 10 años de duración y comunican sus parámetros al receptor mediante la codificación de sus fuentes de luz, a través de la cual le transmiten constantemente desde el estado de su batería hasta su número de serie, por lo que no necesitan ser cableados entre ellos.
La luz que forma cada barrera está compuesta por una transmisión infrarroja y otra ultravioleta, lo que le permite al sistema identificar con precisión si lo que está oscureciendo la transmisión es calor, humo, polvo, vapor de agua u objetos, y actuando en consecuencia, esta diferenciación es tan precisa que permite que la barrera se ajuste a una sensibilidad mucho más alta que la de las barreras tradicionales, ya que no tiene riesgo de producir falsas alarmas por contaminación.
Las barreras OSID (Open Space Image Detection) están pensadas para grandes ambientes abiertos en donde otras tecnologías serían problemáticas por su altura, superficie y compartimentación vertical, como sucede en los atrios de centros comerciales donde existen plantas abiertas al atrio.
El receptor está disponible en tres ángulos de visión, 10º, 40º y 80º mientras que los emisores están disponibles en dos potencias; combinando ángulos y potencias podemos realizar un diseño en abanico para grandes extensiones, como almacenes o estaciones a diseños de hasta 150 m. de longitud para largos pasillos o túneles.
Económicamente, los sistemas OSID son muy competitivos y ofrecen una alternativa con ventajas adicionales, total rechazo a falsas alarmas, alineación constante y automática, mayor sensibilidad que otras tecnologías similares, menor mano de obra, menores costes de instalación, mantenimiento más económico y direccionabilidad de cada haz, hasta el punto de ser capaces de triangular el origen del humo, en caso de realizar instalaciones cruzadas.
This document discusses personal protective equipment (PPE) and its uses. It provides examples of common types of PPE that protect the head, eyes, face, hearing, feet, hands, and body. For each body part, it outlines hazards that PPE protects against and when employers must provide specific types of PPE. The document stresses that employers must implement a complete PPE program that involves hazard assessment, controls, PPE selection and use, training, and compliance.
Check Point provides cybersecurity solutions with robust architectures that offer uncompromised security and operational efficiency. It has four key differentiators, including innovative real-time prevention technologies, the most efficient security management, a proven track record of security excellence through third-party ratings, and an extreme sense of urgency with the most secure architecture and fastest response times to vulnerabilities.
Kidde WHDR Kitchen Hood Fire Protection End User Training.pdfEdyDJYoung
The document provides instructions for operating and maintaining a Kidde WHDR kitchen hood fire suppression system from Citra Inti Semesta. It describes how the system works to discharge a wet agent through nozzles to extinguish fires. It outlines steps to take in the event of a fire, including evacuating, manually activating the system if it does not automatically discharge, calling the fire department, and using a fire extinguisher if safe to do. The document also lists maintenance and safety procedures like regular cleaning, inspections, and following emergency procedures to protect against kitchen fires.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help alleviate symptoms of mental illness and boost overall mental well-being.
X Ray inspection of Plated Throughhole Devices Using X-RayBob Wettermann
X-ray inspection can be used to determine and confirm hole fill which is a non-inspectable criteria for PTH devices. Industry standards are reviewed as well as sample x-ray images are provided. Call solder.net for more assistance.
This document provides guidance on designing low voltage non-motor industrial feeder circuits for Saudi Aramco. It discusses factors that affect calculating the ampacity, short circuit, and voltage drop ratings of feeder conductors. These factors include conductor material type, ambient temperature, conductor temperature rating, number of conductors in a raceway, and conductor size. The document also covers selecting protective devices, raceway sizes, and resources to use for feeder circuit design.
Learn how to implement Behavioral Based Safety system (BBS) at your workplace; what are the benefits of BBS, what are the roles of the employees and more.
Cembre PVC insulated fork/spade terminals (red 0.25-1.5sqmm, blue 1.5-2.5sqmm, yellow 4-6sqmm) - installed using Cembre HP3 ratchet crimp tool.
Cembre Specification, PVC Insulated Fork Spade Terminals
The unique funnel shape of PVC sleeve, guarantees total insertion of the conductor strands into the crimp terminal barrel creating a secure, reliable, electrical and mechanical crimped connection. The internal surface of the crimp terminal barrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength.
The “F” range of Cembre crimp terminals offer a wide selection of rings, forks, pins and blades.
Cembre Specification, PVC Insulated Fork Spade Terminals
The unique funnel shape of PVC sleeve, guarantees total insertion of the conductor strands into the crimp terminal barrel creating a secure, reliable, electrical and mechanical crimped connection. The internal surface of the crimp terminal barrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength.
Cembre Specification, PVC Insulated Ring Terminals
The unique funnel shape of PVC sleeve, guarantees total insertion of the conductor strands into the crimp terminal barrel creating a secure, reliable, electrical and mechanical crimped connection. The internal surface of the crimp terminal barrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength.
The unique funnel shape of PVC sleeve, guarantees total insertion of the conductor strands into the crimp terminal barrel creating a secure, reliable, electrical and mechanical crimped connection. The internal surface of the crimp terminal barrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength.
Cembre Specification, PVC Insulated Fork Spade Terminals
The unique funnel shape of PVC sleeve, guarantees total insertion of the conductor strands into the crimp terminal barrel creating a secure, reliable, electrical and mechanical crimped connection. The internal surface of the crimp terminal barrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength.
Cembre Specification, PVC Insulated Ring Terminals
The unique funnel shape of PVC sleeve, guarantees total insertion of the conductor strands into the crimp terminal barrel creating a secure, reliable, electrical and mechanical crimped connection. The internal surface of the crimp terminal barrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength.
Cembre Specification, PVC Insulated Ring Terminals
The unique funnel shape of PVC sleeve, guarantees total insertion of the conductor strands into the crimp terminal barrel creating a secure, reliable, electrical and mechanical crimped connection. The internal surface of the crimp terminal barrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength.
The “F” range of Cembre crimp terminals offer a wide selection of rings, forks, pins and blades.
Cembre Specification, PVC Insulated Ring Terminals
The unique funnel shape of PVC sleeve, guarantees total insertion of the conductor strands into the crimp terminal barrel creating a secure, reliable, electrical and mechanical crimped connection. The internal surface of the crimp terminal barrel is rifled to improve contact with conductor strands when crimped and to increase tensile strength.
Eaton price list 2020 innteso 01042020 AKBAR TRADING ESTAKBAR TRADING
This document contains a price list with product codes and types for various products. There are over 200 listings of product codes paired with alphanumeric product type identifiers, suggesting this is a price list for a catalog of products sold by category and specification. The product codes start with letters followed by numbers, numbers only, or letters only, indicating different product categories. The price list contains specifications like voltage, phase, and amperage in some of the product types.
This document provides information on various types of electrical fuses, including Class J Low-Peak fuses, Class CC Low Peak fuses, Class RK5 Fusetron fuses, and Class RK5 Fusetron fuses. It lists the amp ratings and item numbers for samples of each type of fuse.
Abb Combiflex Lugs 1.5, Abb Combiflex Lugs 2.5 | AKBAR TRADING EST. JUBAILAKBAR TRADING
Contact sockets, silver plated (set of 100 pcs)
10 A, conductor area 0,25-1,5 mm2
20 A, conductor area 1,5-2,5 mm2
1
1
1MRK 002 136-A
1MRK 002 136-D
50 g
90 g
Contact pins, silver plated (set of 100 pcs)
10 A, conductor area 0,25-1,5 mm2
20 A, conductor area 1,5-2,5 mm2
1
1
1MRK 002 136-G
1MRK 002 136-H
60 g
120 g
A cold applied tape which remains plastic over a wide temperature range. It is
non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis,
salts and micro-organisms and highly impermeable to water, water vapour and
gases. For the protection of buried or exposed pipes, rods, cables, valves and
metal fittings from corrosion. Waterproofing of cables and thermal insulation.
Partex identification catalogue 2017 | AKBAR TRADING EST. AKBAR TRADING
PARTEX ensure that all of products meet the same consistent high quality standard, They subject them to a series of exacting tests, both in-house and at
independent test laboratories. This ensures they meet the requirements of the releavnt International Standards, such as BS EN and UL certiication.
In our UK test laboratory they have equipment that enables us to perform mechanical force tests up to 30KN which means that they can test to destruction
our full range of cable terminations, and cable management products.
We are able to provide test reports and calibration certiicates upon request.
We can also perform a moisture content inspection on our range of Nylon products to ensure they are perfectly conditioned, strong, lexible and durable.
In line with our ISO9001 certiication we operate a strict stock rotation system to ensure that all products reach you in perfect condition.
To meet the requirements of our ISO14001 environmental standard, we strive to minimise our impact upon the environment at all stages of our business
activities.
Partex lugs and_connectors_catalogue | AKBAR TRADING EST. AKBAR TRADING
All copper tube terminals have bell mouth entry for ease of cable insertion.
All terminals have inspection holes to check cable is properly inserted before crimping.
Copper tube splices, four hole transformer fixing, long palm, right angle, blank terminals, copper pins, dissimilar copper splices and flag terminals also available on request.
Sizes above 400mm² available on request.
Other Stud sizes available on request.
MATERIAL: High conductivity copper to BS2871
PURITY: > 99.9%
COATING: Bright electro-tin plating to BS 1872
SCHNEIDER CIRCUIT BREAKER
Schneider Electric range of products in Circuit Breakers and Switches: Compact NS < 630A,Compact NS,Compact NSF/NSJ,Compact NG160,Compact
Thermal Magnetic Circuit Breaker, Miniature, Multi 9 C60N Series, 120 VAC
SCHNEIDER ELECTRIC SAUDI ARABIA
SCHNEIDER - STOCK - SAUDI ARABIA- AKBAR TRADINGI c60n circuit_breakers_schnei...AKBAR TRADING
Acti9 iC60N MCBs 2 Pole
iC60N curve B, C, D circuit breakers are multi-standard circuit breakers which combine circuit protection against short-circuit currents and circuit protection against overload currents
เบรกเกอร์,قاطع الدائرة الكهربائية, 电气断路器 , Leistungsschalter
AKBAR TRADING EST| Thomas & Betts Cable Tie TyrapAKBAR TRADING
1.1
8
Premium cable ties with steel locking barb
Characteristics
The single most distinguishing feature of the Ty-Rap
®
cable ties
from Thomas & Betts is the stainless steel locking barb, firmly
anchored inside the tie head (Fig. 1).
It is made from corrosion-proof, antimagnetic steel (Marine
Grade Type 316).
This guarantees a strong and durable locking of the tie even
under the most adverse conditions - humidity, heat, cold, etc.
and is also proof against vibration and external shock.
When applying ties with Thomas & Betts tooling, the excess
end of the tie is automatically cut off and the slight over cut
retracts into the tie, so that there is no risk of injury from
protruding sharp edges. (Fig. 3)
The low-profile design of the head allows secure tying in tight
spaces.
The edges of the head are also rounded off to offer maximum
protection from injury.
The transition from the strap to the head is gradual. This
protects the material against breaking at this most critical
point.
TY523MX - THOMAS & BETTS - Cable Tie, Ty Rap® Self Lock, Nylon| AKBAR TRADING...AKBAR TRADING
Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com. J3. J. Ty-Rap. ®/Ty-Fast. ®. T&B's Ty-Rap® Cable Ties
Thomas & Betts Key Products:
Ty-Rap Cable Ties
Ty-Met Cable Management Products
Cable Conduits
Cable Accessories
Akbar trading splicing_kit_raychem_te_connectivityAKBAR TRADING
RSTI-58 Separable Connection
CRSM Heat-shrinkable
Category 2 Catalog
HVBT Busbar Insulation Tape
RSTI-6952 Separable Connection
low voltage medium voltage high voltage termination
ALL RAYCHEM PRODUCTS ARE APPROVED BY SAUDI ARAMCO / SEC / SABIC / ROYAL COMMISSION.
Akbar trading splicing_kit_loadbreak_elbow_raychem_te_connectivityAKBAR TRADING
This document contains contact information for a company called Akbar Trading located in Jubail, Saudi Arabia. It lists their P.O. Box address in Jubail and their telephone and fax numbers which start with the country code for Saudi Arabia (+966). It also includes their email address as mail@akbartrading.com.
Akbar trading splicing_kit_loadbreak_elbow_raychem_te_connectivityAKBAR TRADING
ENERGY /// HIGH VOLTAGE CABLE ACCESSORIES UP TO 245 KV
RAYCHEM
HIGH VOLTAGE
CABLE ACCESSORIES
UP TO 245 KV
Heat-Shrinkable Terminations (IHVT-H/ OHVT-H/ LHVT-H)
10
Heat-Shrinkable Terminations for DC Filter Cables (FCEV)
14
Outdoor Terminations Composite (OHVT-C)
17
Outdoor Terminations Porcelain (OHVT-P)
22
Outdoor Terminations Dry-type (OHVT-D)
27
Add-On Kits for Outdoor Terminations
Heat-Shrinkable Joints (EHVS-H)
46
One Piece Joints (EHVS-S)
48
Three Piece Joints (EHVS-T)
51
Fibre-Optic Add-On Kit for HV Cable Joints
2. 8
The unique funnel shaped
PVC sleeve guarantees total
insertion of the conductor
strands into the terminal
barrel, creating a secure
and reliable, electrical and
mechanical connection.
The internal surface of the
PVC INSULATED CRIMP TERMINALS
F range funnel entry
barrel is rifled to improve
contact with conductor
strands when crimped and
to increase tensile strength.
The “F” range of terminals
offers a wide selection of
rings, forks, pins and blades,
designed to meet the ever
RF-P 8 3,9 1,6 8,0 17,9 3.500/100
RF-P 10 3,9 1,6 10,0 19,9 3.500/100
RF-P 12 3,9 1,6 12,0 22,1 3.000/100
BF-P 8 4,9 1,7 8,0 17,9 3.000/100
BF-P 10 4,9 1,8 10,0 19,9 3.000/100
BF-P 12 4,9 1,8 12,0 21,9 3.000/100
GF-P 10 6,7 2,2 10,0 24,6 1.500/100
GF-P 12 6,7 2,2 12,0 26,8 1.500/100
GF-P 14 6,7 2,2 14,0 28,8 1.500/100
Conductor Size
sqmm
(AWG)
Quantity
Box/Bag
Ø
D i m e n s i o n s m m
LPB
Ref.
Conductor Size
sqmm
(AWG)
Quantity
Box/Bag
Ø
D i m e n s i o n s m m
LPB
Ref.
0,25÷1,5
(22÷16)
1,5÷2,5
(16÷14)
4÷6
(12÷10)
pin terminals blade terminals
RF-PP 12 3,9 3,0 12,8 22,9 3.500/100
RF-PP 12/1 3,9 3,0 11,3 21,4 3.500/100
RF-PP 12/19 3,9 1,9 13,2 23,3 3.500/100
RF-PP 12/23 3,9 2,3 13,2 23,3 3.000/100
RF-PP 14 3,9 3,0 14,8 24,9 3.000/100
RF-PP 16/23 3,9 2,3 17,2 27,3 2.500/100
BF-PP 12 4,9 3,5 12,8 22,9 2.500/100
BF-PP 12/25 4,9 2,5 13,3 23,4 2.500/100
BF-PP 12/29 4,9 2,9 13,3 23,4 2.500/100
BF-PP 16/25 4,9 2,5 17,2 27,3 2.500/100
GF-PP 12 6,7 4,0 13,3 27,5 1.000/100
GF-PP 17 6,7 2,9 19,2 33,4 1.000/100
0,25÷1,5
(22÷16)
1,5÷2,5
(16÷14)
4÷6
(12÷10)
VALSTAR V3-F
Comprising:
- An assortment of crimp
terminals for conductor
sizes 0,25 ÷ 6 sqmm
- Tool HP3
changing end user require-
ments.
The operating temperature
range is – 20 to + 80°C
(Surge + 90°C).
Recommended crimping
tools are shown on pages
92 to 111, 144, 183.
hooked blade terminals
RF-PPL 30 3,9 3,0 17,5 28,4 1,7 3.000/100
RF-PPL 46 3,9 4,6 17,5 28,4 1,7 2.500/100
BF-PPL 30 4,9 3,0 17,5 28,4 1,7 2.500/100
BF-PPL 46 4,9 4,6 17,5 28,4 1,7 2.500/100
GF-PPL 46 6,7 4,6 17,5 32,7 1,9 1.000/100
Conductor Size
sqmm
(AWG)
Quantity
Box/Bag
Ø
D i m e n s i o n s m m
L XPB
Ref.
0,25÷1,5
(22÷16)
1,5÷2,5
(16÷14)
4÷6
(12÷10)
The unique funnel shaped
PVC sleeve guarantees total
insertion of the conductor
strands into the terminal
PVC INSULATED CRIMP TERMINALS
F range funnel entry
barrel is rifled to improve
contact with conductor
strands when crimped and
to increase tensile strength.
RF BF
GF
PVC INSULATED CRIMP TERMINALS
F range funnel entry
changing end user require-
PVC INSULATED CRIMP TERMINALS
F range funnel entry
barrel is rifled to improve
VALSTAR V3-F
Comprising:
File no. E125401File no. E125401
mail@akbartrading.com Fax. 00966 13363 3883
www@akbartrading.com Tel. 00966 13363 5225