Our COMETS is the perfect compact ambient air monitoring station. Fully air-conditioned, automated and according to EU guidelines.
This monitoring station can be placed anywhere in critical places such as busy intersections, street canyons, temporary background stations and much more.
The compact station comes with a complete solution such as NO, NO2, NOx, CO, PM10 - PM2.5, Black Carbon and BTEX analyzer, logger and platform.
It is constructed in such a way that minimal maintenance is required. The station can work autonomously and data can be viewed, analyzed and validated remotely using our state-of-the-art logger and "air quality data platform".
The Serinus 44 analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology and an external thermal catalytic converter to measure NO, NO2, NOx and NH3 in ambient air (LDL < 0.4 ppb, Range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 40 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
GCEM4100 extractive gas analyser codel datasheetENVIMART
The GCEM4100 is CODEL's hot extractive multi-channel gas analyzer for continuous emissions monitoring. It can measure CO, NO, NO2, SO2, HCl, CH4, CO2 and other gases simultaneously from high temperature flue gases. The system draws gas samples through a heated probe and transfers them to an analysis cabinet without extensive conditioning. It provides automatic calibration and verification of measurements using zero and span gases. The analyzer can integrate with CODEL's SmartCEM software for real-time data analysis and reporting.
Hệ thống quan trắc khí thải tự động - Tư vấn: 0938-564-123Lâm Nguyễn Hoàng
Hệ thống quan trắc khí thải tự động cho chủ nguồn thải khí thải công nghiệp - Tư vấn đầu tư lắp đặt: lam.nguyen@vietan-enviro.com - 0938-564-123 (Mr Lâm)
Energy tech 301 codel datasheet-dust monitorENVIMART
The EnergyTech 301 is a low-cost dust monitor that uses tribo-electric sensor technology to directly measure particulate concentration. It can monitor ducts from 250mm to 5m in size, requires minimal maintenance, and provides accurate measurements from 0.07 to 6500 mg/m3. The monitor has integrated calibration functions, alarm outputs, RS485 and 4-20mA outputs, and is suitable for a wide range of applications.
Wireless Flow Temperature Sensor Calibration John Gibbs
A look at a recent time sensitive project requiring a non-invasive, temperature sensor solution to provided the means of calibrating the flowing temperature of the production flow in the system during the remaining life of the oil field.
The Serinus 44 analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology and an external thermal catalytic converter to measure NO, NO2, NOx and NH3 in ambient air (LDL < 0.4 ppb, Range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 40 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
GCEM4100 extractive gas analyser codel datasheetENVIMART
The GCEM4100 is CODEL's hot extractive multi-channel gas analyzer for continuous emissions monitoring. It can measure CO, NO, NO2, SO2, HCl, CH4, CO2 and other gases simultaneously from high temperature flue gases. The system draws gas samples through a heated probe and transfers them to an analysis cabinet without extensive conditioning. It provides automatic calibration and verification of measurements using zero and span gases. The analyzer can integrate with CODEL's SmartCEM software for real-time data analysis and reporting.
Hệ thống quan trắc khí thải tự động - Tư vấn: 0938-564-123Lâm Nguyễn Hoàng
Hệ thống quan trắc khí thải tự động cho chủ nguồn thải khí thải công nghiệp - Tư vấn đầu tư lắp đặt: lam.nguyen@vietan-enviro.com - 0938-564-123 (Mr Lâm)
Energy tech 301 codel datasheet-dust monitorENVIMART
The EnergyTech 301 is a low-cost dust monitor that uses tribo-electric sensor technology to directly measure particulate concentration. It can monitor ducts from 250mm to 5m in size, requires minimal maintenance, and provides accurate measurements from 0.07 to 6500 mg/m3. The monitor has integrated calibration functions, alarm outputs, RS485 and 4-20mA outputs, and is suitable for a wide range of applications.
Wireless Flow Temperature Sensor Calibration John Gibbs
A look at a recent time sensitive project requiring a non-invasive, temperature sensor solution to provided the means of calibrating the flowing temperature of the production flow in the system during the remaining life of the oil field.
Easy line EL3000 series ABB CEMS Datasheet-continuous gas analyzersENVIMART
Easy line EL3000 series ABB CEMS Datasheet-continuous gas analyzers - ABB - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
GCEM 40 series gas analyser insitu-codel datasheetENVIMART
GCEM 40 series gas analyser insitu-codel datasheet - CODEL - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
The Serinus range of analyzers have been designed using over 40 years of experience in air quality monitoring. They integrate seamlessly into continuous monitoring networks and offer benefits such as a two year warranty, minimal maintenance needs through remote access and diagnostics, versatile interfacing options, intuitive menu systems, removable flash memory storing 10 years of data, and low power consumption. The Serinus 31 specifically measures carbon dioxide concentration using proven NDIR filter correlation technology, and has a range of 0-2000 ppm with approvals from various standards organizations. It provides remote communication and data logging capabilities.
- Continuous Emissions Monitoring Systems (CEM) company established in 1983 and provides environmental monitoring equipment including ambient air quality monitoring and CEM systems.
- The company has over 40 staff and locations across the UK, Ireland, Middle East, and other regions. It provides optical absorption spectroscopy CEM systems using OPSIS analyzers to directly monitor stack emissions without extracting samples.
- Key benefits of the OPSIS CEM systems include being non-extractive, requiring no sample system, ability to measure multiple gases, high availability due to simple design, and service and support from ET.
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
GCEM 40 series extractive gas analyser codel datasheetENVIMART
The document describes the GCEM 40 Series Extractive Gas Analyzer, a multi-channel gas analyzer from CODEL for continuous emissions monitoring. It can measure multiple gas species simultaneously, including CO, NO, NO2, NOx, SO2, CH4, HCl, N2O, CO2, H2O, and O2. It features automatic zero and span calibration, heated probe and sample line, and outputs data in real-time to meet regulatory requirements. The gas analyzer works with CODEL's SmartCEM software for graphing and reporting emissions data over time.
EL300 multi channel water controller-tethys datasheetENVIMART
EL300 multi channel water controller-tethys datasheet - Tethys - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
CCS 120 endress+hauser datasheet-sensor for total chlorineENVIMART
CCS 120 endress+hauser datasheet-sensor for total chlorine - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL < 0.5 ppb, range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Co12 m carbon monoxide gfc analyser datasheeta1-cbiss
The CO12M is an IR gas filter correlation (IR-GFC) based carbon monoxide analyser that can measure CO concentrations between 40 ppb to 200 ppm with excellent stability and accuracy. It uses sealed gas cells located in a thermoregulated module and has an easy-to-use interface. Its multitasking software allows for advanced calculations and user-friendly access to instrument parameters, status, maintenance data, and real-time synoptics. It is compact, portable, and plug-and-play for continuous indoor and outdoor air quality monitoring.
The Serinus 50 Sulfur Dioxide (SO2) analyser delivers precise and reliable performance at excellent value. It uses proven pulsed UV fluorescent radiation technology to measure SO2 in ambient air (LDL <0.3 ppb, Range 0-20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Vom 09. bis 10. Mai findet in Graz die Tunnel Safety and Ventilation statt.
Neben der Konferenz wird die Tagung durch eine Firmenausstellung begleitet.
Acoem wird sein Angebot an Tunnelsensoren auf der diesjährigen Konferenz für Tunnelsicherheit und Belüftung ausstellen. Sie finden unsere Systeme in der Ausstellungshalle am Stand 22.
Weitere Informationen zur Tagung erhalten Sie unter: http://www.tunnel-graz.at/
We specialise in Bioaerosols, Sick Building Syndrome, Fenceline Monitoring, Urban air quality, Industrial air quality, construction air quality, CEMS, CAMS and much more.
Easy line EL3000 series ABB CEMS Datasheet-continuous gas analyzersENVIMART
Easy line EL3000 series ABB CEMS Datasheet-continuous gas analyzers - ABB - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
GCEM 40 series gas analyser insitu-codel datasheetENVIMART
GCEM 40 series gas analyser insitu-codel datasheet - CODEL - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
The Serinus range of analyzers have been designed using over 40 years of experience in air quality monitoring. They integrate seamlessly into continuous monitoring networks and offer benefits such as a two year warranty, minimal maintenance needs through remote access and diagnostics, versatile interfacing options, intuitive menu systems, removable flash memory storing 10 years of data, and low power consumption. The Serinus 31 specifically measures carbon dioxide concentration using proven NDIR filter correlation technology, and has a range of 0-2000 ppm with approvals from various standards organizations. It provides remote communication and data logging capabilities.
- Continuous Emissions Monitoring Systems (CEM) company established in 1983 and provides environmental monitoring equipment including ambient air quality monitoring and CEM systems.
- The company has over 40 staff and locations across the UK, Ireland, Middle East, and other regions. It provides optical absorption spectroscopy CEM systems using OPSIS analyzers to directly monitor stack emissions without extracting samples.
- Key benefits of the OPSIS CEM systems include being non-extractive, requiring no sample system, ability to measure multiple gases, high availability due to simple design, and service and support from ET.
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
The Serinus 40 Oxides of Nitrogen analyser delivers precise and reliable performance at excellent value. It uses proven chemiluminescence technology to measure NO, NO2 and NOx in ambient air (LDL <0.4 ppb, range 0-20 ppm).
GCEM 40 series extractive gas analyser codel datasheetENVIMART
The document describes the GCEM 40 Series Extractive Gas Analyzer, a multi-channel gas analyzer from CODEL for continuous emissions monitoring. It can measure multiple gas species simultaneously, including CO, NO, NO2, NOx, SO2, CH4, HCl, N2O, CO2, H2O, and O2. It features automatic zero and span calibration, heated probe and sample line, and outputs data in real-time to meet regulatory requirements. The gas analyzer works with CODEL's SmartCEM software for graphing and reporting emissions data over time.
EL300 multi channel water controller-tethys datasheetENVIMART
EL300 multi channel water controller-tethys datasheet - Tethys - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
CCS 120 endress+hauser datasheet-sensor for total chlorineENVIMART
CCS 120 endress+hauser datasheet-sensor for total chlorine - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
The Serinus 10 Ozone (O3) analyser delivers precise and reliable performance at excellent value. It uses proven non-dispersive ultraviolet (UV) absorption technology to measure O3 in ambient air (LDL < 0.5 ppb, range 0 – 20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Co12 m carbon monoxide gfc analyser datasheeta1-cbiss
The CO12M is an IR gas filter correlation (IR-GFC) based carbon monoxide analyser that can measure CO concentrations between 40 ppb to 200 ppm with excellent stability and accuracy. It uses sealed gas cells located in a thermoregulated module and has an easy-to-use interface. Its multitasking software allows for advanced calculations and user-friendly access to instrument parameters, status, maintenance data, and real-time synoptics. It is compact, portable, and plug-and-play for continuous indoor and outdoor air quality monitoring.
The Serinus 50 Sulfur Dioxide (SO2) analyser delivers precise and reliable performance at excellent value. It uses proven pulsed UV fluorescent radiation technology to measure SO2 in ambient air (LDL <0.3 ppb, Range 0-20 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
Vom 09. bis 10. Mai findet in Graz die Tunnel Safety and Ventilation statt.
Neben der Konferenz wird die Tagung durch eine Firmenausstellung begleitet.
Acoem wird sein Angebot an Tunnelsensoren auf der diesjährigen Konferenz für Tunnelsicherheit und Belüftung ausstellen. Sie finden unsere Systeme in der Ausstellungshalle am Stand 22.
Weitere Informationen zur Tagung erhalten Sie unter: http://www.tunnel-graz.at/
We specialise in Bioaerosols, Sick Building Syndrome, Fenceline Monitoring, Urban air quality, Industrial air quality, construction air quality, CEMS, CAMS and much more.
The Serinus 56 Total Sulfur analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and an external thermal converter to measure TS in ambient air (LDL <0.3ppb, Range 0-10 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
This document summarizes environmental monitoring equipment available for hire from Enviro Technology Services plc including:
1) A wide range of state-of-the-art equipment such as air quality monitoring systems, dust and particulate monitors, and gas analyzers.
2) Short, medium, or long-term hire agreements with no capital outlay and certified calibrations.
3) A highly qualified service team that can install equipment anywhere needed and ensure it is set up, running, and collecting data efficiently.
The ChemDAQ Steri-Trac gas monitoring system provides toxic gas detection and workplace safety. It features a modular design that allows for custom configurations, and a sensor exchange program that reduces operating costs by replacing sensors every 4 months without requiring on-site calibration. The system monitors ethylene oxide, hydrogen peroxide, ozone, and peracetic acid, and provides trend analysis and early warnings via software.
The Serinus 57 Total Reduced Sulfur analyser delivers precise and reliable performance at excellent value. It uses proven UV fluorescent radiation technology and an external thermal converter to measure TRS in ambient air (LDL <0.3 ppb, Range 0-10 ppm).
The Serinus range of analysers has been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result: instruments that integrate seamlessly into continuous monitoring networks.
We specialise in Bioaerosols, Sick Building Syndrome, Fenceline Monitoring, Urban air quality, Industrial air quality, construction air quality, CEMS, CAMS and much more.
This document provides contact information for a1-cbiss Ltd, including sales and service managers for different areas, the head office details, and general contact information including phone numbers, fax numbers, email addresses and website. It also lists the products and services provided by a1-cbiss Ltd, including continuous emission monitoring systems, particulate monitoring systems, gas analyzers and a syngas monitoring system.
THE GAS CHROMATOGRAPHIC REVOLUTION
FOR ENVIRONMENTAL MONITORING
PyxisGC BTEX is the first and unique gaschromatograph "carrier gas free" for remote BTEX monitoring
in ambient air. PyxisGC BTEX is manufactured by Pollution Analytical Equipment in compliance with
EN14662-3:2015.
Benchmark Magee Brochure - AE33 Next GenJason Potts
The AE33 Aethalometer offers enhanced performance including full-spectrum 7-wavelength operation from UV to IR at 1 Hz, real-time dual-spot technology to compensate for loading effects and provide composition information, and dynamic active zero for performance checks. It is network ready, rack mountable, and has low power consumption.
AS510 remote air quality monitor
A single unit, based around a powerful 32-bit floating-point ARM microcontroller, designed to provide a complete analysis of local air quality.
Oxymax cos51 d endress+hauser datasheet-measurement of the dissolved oxygenENVIMART
Oxymax cos51 d endress+hauser datasheet-measurement of the dissolved oxygen - Endress+Hauser - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
The Oxymitter™ 4000 In Situ Oxygen Transmitter is the world's first in situ, zirconium oxide-based oxygen transmitter for flue gas measurement with an explosion-proof rating. These oxygen measurements can be used in a control system or by a boiler operator to fine tune burner fuel/air ratios for maximum efficiency.
VEGA Pressure & Level Measurement - Environment and Recycling Industry Applic...Thorne & Derrick UK
This document discusses VEGA's measurement technology solutions for various environmental and recycling industries. It begins by introducing VEGA's portfolio of level, pressure, and switching instrumentation using technologies like radar, ultrasonic, guided microwave, and capacitive. It then describes VEGA's plics modular instrument system and highlights its use of robust housings, reliable sensors, and easy adjustment via PLICSCOM. The document concludes by listing some example applications of VEGA's instruments in waste incineration, landfills, special waste treatment, biogas production, and recycling.
Digital sensor for measuring dissolved oxygen. Longterm-stable sensor for water and wastewater applications. . Email: lam.nguyen@vietan-enviro.com HP: 0945 293292
The VICONOX tunnel atmosphere monitor is a single sensor solution for measuring NO2, NO, (NOx), CO, visibility and temperature (or combinations of) within a road traffic tunnel, rail tunnel or other confined space.
Similaire à COMETS: compact ambient air monitoring station by ETS (20)
We fotograferen, scannen woningen, gebouwen, constructies voor vastgoedmakelaars, architecten, projectontwikkelaars, aannemers,...
Daarnaast maken we 360° scans, virtual tours, grondplannen, luchtfoto's met
drones, mapping en nog veel meer.
Diensten voor vastgoed
Standaard fotografie
3d scans
Virtual tours
2d vloerplannen
Drone foto -en videografie
Virtual staging
Nabewerken foto's
Vastgoed teaser videos
Diensten voor
constructies
Foto en video
3d scans
E57 files
Vloerplannen
Puntenwolken
Mesh bestanden
Trueplan
Luchtfoto's
en meer
XRF Based &Multi-Metals & Continuous Water Analyzer Xact920European Tech Serv
Process monitoring – feedback for water treatment may improve the efficiency of the treatment process – use fewer chemicals to achieve require effluent emission limits
Measurement of Se, As for compliance with Steam Electric Generating Effluent Guidelines
Monitoring of treatment of wastewater by biological based treatment systems
Measurement of Corrosion Products (e.g. Fe, Ni, Cr and Mn) to improve operating efficiency
Measurement of Elements in Nuclear Power Plant Applications (e.g. Pb, Cu, Fe)
Reduce laboratory analysis costs
On-line, in-situ, and at-line monitoring of batch and continuous processes
Displays up to 15 properties at once and measures up to 30 properties per stream
Optical multiplexing capabilities provide analysis of up to 16 process streams using fiber optic or extractive stream switching
Utilizes process-proven ANALECT® Diamond 20™ Transept™ optical head
SpectraRTS™ software engineered exclusively for on-line monitoring, allowing use by engineers, maintenance personnel, and chemists
All ANALECT® lab and on-line systems share core optical technology, allowing instrument-to-instrument calibration transfers
The FROG-5000™ is a portable gas chromatograph (GC) that identifies multiple target volatile organic compounds (VOC) in water, soil, and air. The FROG-5000™ detects chemicals as volatile as vinyl chloride to semi-volatile organics such as naphthalene with lab quality results.
Featuring a MEMS (micro electro-mechanical systems), the FROG-5000™ has an integrated heater for temperature ramp chromatography – ramping the temperature reduces the analysis time and aids in the separation of late eluting compounds. These components combined with an internal PID identify VOCs in ambient air at concentrations as low as 1 part per billion.
Continuous analysis:
Continuous analysis of aerosols on filters for optical and thermal analysis
OC/EC determination:
Real time/online TC/BC/EC/OC and Brc analysis in combination with our Aethalometer AE33
Ease of Use:
No fragile glassware, no catalyst, no gas supplies needed
Rugged, Reliable, automatic:
35 years of published performance, rugged, all-steel construction, unattended operation – 1 month minimum
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
The Mi3 is a turnkey solution for automotive emission testing that features the world's fastest particle sensor. It provides accurate real-time data, reliable measurements in all environments, and ensures measurements meet emission regulations standards. The Mi3 requires little maintenance due to its low-maintenance particle sensor and self-diagnostics. It can integrate seamlessly with existing emission test infrastructure through various connection options.
"BTEX ambient air analysis: sources, regulations, technologies for controls"European Tech Serv
"BTEX ambient air analysis: sources, regulations, technologies for
controls"
In collaboration with The Council for Research and Experimentation in Agriculture at the Puglia
Regional Environmental Protection Agency (ARPA)
The M1000 operates according to the diffusion principle. The monitor is mounted on a flange which is located at the top of the silo or bin. The gas in the atmosphere of the silo diffuses into the oxygen sensor. Since there is no positive movement of chemical powder to the sensor the sampling gas will not block filters and tubing. The right design and choice of components ensures a long term maintenance free operation.
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit.
Technology background HY-ALERTA SAFETY SYSTEMS – HY-ALERTA 2600European Tech Serv
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit.
H2scan’s 2620 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit. The monitor is designed for either ceiling or wall mount. H2scan’s hydrogen-specific sensor technology has no cross sensitivity to other combustible gases, thus eliminating false positive alarms and ensuring safety system reliability.
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
The CBC machine is a common diagnostic tool used by doctors to measure a patient's red blood cell count, white blood cell count and platelet count. The machine uses a small sample of the patient's blood, which is then placed into special tubes and analyzed. The results of the analysis are then displayed on a screen for the doctor to review. The CBC machine is an important tool for diagnosing various conditions, such as anemia, infection and leukemia. It can also help to monitor a patient's response to treatment.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
artificial intelligence and data science contents.pptxGauravCar
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
2. C O M E T S
COMETS : COMPACT AMBIENT AIR MONITORING STATION
Our COMETS is the perfect compact ambient air monitoring station. Fully air-
conditioned, automated and according to EU guidelines.
This monitoring station can be placed anywhere in critical places such as busy
intersections, street canyons, temporary background stations and many
more.
The compact station comes with a complete solution such as NO, NO2, NOx,
CO, PM10 - PM2.5, Black Carbon and BTEX analyzer, logger and platform.
It is constructed in such a way that minimal maintenance is required. The
station can work autonomously and data can be viewed, analyzed and
validated remotely using our state-of-the-art logger and "air quality data
platform".
COMPACT
TRANSPORTABLE AND COMPACT IN EVERY WAY
An Air Quality Monitoring Station (AQMS) is a system that measures
metrological parameters such as wind speed, temperature, barometric
pressure and ambient parameters.
The COMETS AQMS also integrates a series of ambient analyzers to monitor
the concentration of air pollutants (such as NO, NO2, NOx, CO, PM10, PM2.5,
BC, BTEX, etc.), continuously.
ETS also provides mobile monitoring stations that can be customized to your
needs, used to monitor ambient conditions at multiple sites.
3. [CO] ANALYSER
CARBON MONOXIDE
Our Serinus® 30 carbon monoxide (CO) analyser delivers precise and reliable performance at excellent value. It uses proven NDIR gas filter correlation
technology to measure CO in ambient air (LDL < 40 ppb, range 0 to 200 ppm).
APPROVALS: US EPA approval (RFCA–0509–174) • EN approval TÜV (936/21221977/D) • EN approval MCERTS (MC100166/07) • Australian Standard
(AS 3580.7.1-2011) • Russian approval (56262-14) • French approval LSCQA • Ukraine approval (12/3/B/24/295-17)
The Serinus® range of analyzers have been designed using our experience and
knowledge gained from operating large air quality monitoring networks for more
than 40 years. The result, instruments that integrate seamlessly into continuous
monitoring networks.
• Reliable performance complemented with a two year warranty
• Minimize time spent on site performing maintenance through superior remote
instrument control, diagnostic viewing and calibration
• Comprehensive data logging and remote viewing of over 200 operational
parameters
• Versatile interfacing through RS232, USB, Bluetooth, analog and digital I/O and
optional TCP/IP
• Easy setup through an intuitive menu system, advanced GUI and a large alphanumeric keypad with tactile keys
• Instant status indication via illuminated instrument
• Status light buttons on the front panel
• Removable flash memory stores ~10 years of data, including up to 12 individual parameters and event logs. Operational parameters can also
be transferred to memory for easy retrieval
• Latest firmware updates can easily be installed using the USB flash memory drive
• Programming, viewing, downloading and emailing of data is made even simpler using Bluetooth connectivity combined with the “ECOTECH
Serinus® Remote” Android App
• Built-in digital display measuring values and having function of measuring values transferred to graphical trend display
• Enhanced operator safety through the use of 12 VDC internal voltages
• Reduced cost of spare parts, accessories and consumable items through extensive use of standard components across the Serinus® range
• Rack slide design makes accessing internal components and removing the analyzer from a rack cabinet easy
• AQMS power usage can be reduced due to the instrument’s low power demand and its ability to operate over a wide temperature range.
Designed and engineered in Belgium by European Tech Serv nv (ETS) | Sparkevaardekenstraat 3, BE 8600 Diksmuide www.etserv.be
4. [NO - NO2 - NOX] ANALYSER
NITROGEN MONOXIDE – NITROGEN DIOXIDE – NITROGEN OXIDES
Our Serinus® 40 Oxides of Nitrogen (NOx ) analyzer delivers precise and reliable performance at excellent value. It uses proven chemiluminescence
technology to measure NO, NO2 and NOx in ambient air (LDL < 0.4 ppb, range 0 to 20 ppm).
APPROVALS: US EPA approval (RFNA–0809–186) • EN approval TÜV (936/21221977/A) • EN approval MCERTS (MC100167/07) • Australian Standard (AS
3580.5.1-2011) • Russian approval (56263-14) • French approval LSCQA • Ukraine approval (12/3/B/24/295-17)
The Serinus® range of analyzers have been designed using our experience and
knowledge gained from operating large air quality monitoring networks for more than
40 years. The result, instruments that integrate seamlessly into continuous monitoring
networks.
•Reliable performance complemented with a two year warranty
•Minimize time spent on site performing maintenance through superior remote
instrument control, diagnostic viewing and calibration
•Comprehensive data logging and remote viewing of over 200 operational parameters
•Versatile interfacing through RS232, USB, Bluetooth, analog and digital I/O and
optional TCP/IP
•Easy setup through an intuitive menu system, advanced GUI and a large
alphanumeric keypad with tactile keys
•Instant status indication via illuminated instrument status light buttons on the front
panel
• Removable flash memory stores ~10 years of data, including up to 12 individual parameters and event logs. Operational parameters can also
be transferred to memory for easy retrieval
• Latest firmware updates can easily be installed using the USB flash memory drive
• Programming, viewing, downloading and emailing of data is made even simpler using Bluetooth connectivity combined with the “ECOTECH
Serinus® Remote” Android App
• Built-in digital display measuring values and having function of measuring values transferred to graphical trend display
• Enhanced operator safety through the use of 12 VDC internal voltages
• Reduced cost of spare parts, accessories and consumable items through extensive use of standard components across the Serinus® range
• Rack slide design makes accessing internal components and removing the analyzer from a rack cabinet easy
• AQMS power usage can be reduced due to the instrument’s low power demand and its ability to operate over a wide temperature range.
Designed and engineered in Belgium by European Tech Serv nv (ETS) | Sparkevaardekenstraat 3, BE 8600 Diksmuide www.etserv.be
5. FINE DUST SPECTROMETER [PM2.5 - PM10]
PARTICULATE MATTER PM2.5 & PM10
EN 16450 approved fine dust aerosol spectrometer for simultaneous measurement of PM2.5 and PM10, featuring a separate sensor for existing
ceiling glands
Fidas® 200 E is an aerosol spectrometer developed specifically for regulatory air pollution control. It analyzes continuously
the fine dust particles present in the ambient air in the size range 180 nm – 18 µm and calculates simultaneously the
immission values PM10 and PM2.5 to be monitored by law. At the same time PM1, PM4, PMtot, the particle number
concentration Cn and the particle size distribution are calculated and recorded. It thus delivers comprehensive information
about the fine dust particles, as only provided by a counting, single particle measuring principle.
• Type-approved and certified according to latest EN requirements (EN 15267)
• High flexibility for installation due to separation of sensor unit and control unit
• Continuous and simultaneous real-time measurement of multiple PM values
• Additional information on particle number concentration and particle size distribution
• Adjustable time resolution starting at 1 minute
• Light source: LED with high stability and long lifetime
• Long service life
• Low maintenance
• External check of calibration on site possible
• Intuitive and easy to operate
• Reliable function, very high data availability (> 99 %)
• 2 pumps in parallel operation for additional operational safety due to redundancy
• Permanent monitoring of status, among others online monitoring of calibration
• Remote monitoring, maintenance and control easily possible
• Cloud zone via Palas server for worldwide data retrieval
• No radioactive material
• No consumables
• Low energy consumption
• Reduces your operating expenses
Designed and engineered in Belgium by European Tech Serv nv (ETS) | Sparkevaardekenstraat 3, BE 8600 Diksmuide www.etserv.be
6. [BLACK CARBON] ANALYSER
BLACK CARBON AEROSOLS
The Aethalometer is the instrument most-used in the world for the real-time measurement of aerosol Black Carbon. The Model AE33 is the culmination
of almost 40 years of experience and development. It provides accurate data with aerosol speciation on time-scales as rapid as 1 second, using our
patented DualSpot™ technology and multi-wavelength optical analysis.
THE DUALSPOT™ MEASUREMENT METHOD
The Model AE33 Aethalometer incorporates the patented DualSpot™ measurement
method. This completely solves the loading-dependent nonlinearity which affects the
data from any filter-based optical analyzer. The method explicitly does not require any
knowledge or assumption about the existence, origin or magnitude of any optical
nonlinearity: in fact, the calculation yields the “Loading Compensation Parameter” as an
instrumental data output, which may offer insights into the origins and optical
properties of the aerosol.
7-WAVELENGHT OPERATION: UV-IR, 1HZ DATA
The analysis is performed at 7 optical wavelengths spanning the range from the near-
infrared (950 nm) to the near-ultraviolet (370 nm). The sequencing of illumination and
analysis is performed on a 1-Hz time base. This yields the complete spectrum of aerosol
optical absorption with one data line every second.
REAL-TIME SOURCE APPORTIONMENT
An Ångström Exponent model is used in real time to calculate the fraction of BC that may be attributed to biomass combustion.
CALIBRATION AND IN-FIELD VALIDATION
The optical performance of the Model AE33 Aethalometer may be validated by the ‘Neutral Density Optical Filter Kit’, consisting of four precision
optical elements whose absorbance is traceable to fundamental standards. Software routines measure the optical intensities at all wavelengths and
compare the analysis at the instant with the original reference values. Other built-in test programs offer routine checks of stability and leakage. These
features provide the Quality Assurance that is essential both for routine monitoring and research use.
USER AND COMMUNICATIONS INTERFACES
User and communications interfaces permit remote monitoring of operation; data retrieval; performance of internal tests; and reporting of ‘state‐of‐
health’ parameters. Networked services offer automated status reports, issuing daily ‘Green’ reports when the instrument is functioning correctly;
‘Yellow’ reports when the instrument detects that it will need routine attention soon; and ‘Red’ reports immediately upon detecting any fault
condition.
RUGGED, RELIABLE, AUTOMATIC
The Aethalometer has been developed over almost 40 years to offer rugged, reliable, and automatic operation. The Aethalometer recovers
automatically from power interruptions and no operator attention is required for weeks or months, other than replacing the roll of filter tape.
Designed and engineered in Belgium by European Tech Serv nv (ETS) | Sparkevaardekenstraat 3, BE 8600 Diksmuide www.etserv.be
7. [BTEX] ANALYSER
BENZENE - TOLUENE – ETHYLBENZENE - XYLENE
Compact analyser for the real time monitoring of Benzene, Toluene, Ethylbenzene and Xylene in ambient air, compliant with EN14662-3:2015.
Our BTEX compact analyzer for the real time monitoring of Benzene,
Toluene, Ethylbenzene and Xylene in ambient air. It is perfect for both
indoor and outdoor application. PyxisGC BTEX is manufactured is
compliant with EN14662-3:2015.
The BTEX GC can measure those compounds thanks to the MEMS (Micro
Electro-Mechanical Systems) pre-concentrator, GC separation column,
based on a proprietary silicon micromachined chip and the miniaturized
Photoionization detector (PID) that quantifies the peaks.
The BTEX GC is equipped with a Cloud software to monitor and manage the acquired data: it is easily accessed via browser on your phone, tablet or
PC. The Pollution Guardian Cloud software stores up and archives analysis data automatically, it allows the real time data and the historical data
viewing (with creation of charts, tables, graphs and other statistical analyses).
KEY FEATURES
• PID Detector
High sensitivity
• MEMS Technology
Miniaturized
• Carrier Gas Cylinders FREE
Low cost ownership
• Cloud software for management /control
Real time monitoring
Designed and engineered in Belgium by European Tech Serv nv (ETS) | Sparkevaardekenstraat 3, BE 8600 Diksmuide www.etserv.be
8. [DATALOGGER] CONGREGO
TOTAL DATA CONTROL & LOGGING FOR AIR QUALITY & CONTINUOUS EMISSION SYSTEMS
Crucial Data Capture
You’ve made a significant investment in your monitoring equipment, so you need
absolute trust and confidence that the data logging solution you implement will capture
your crucial data.
A next generation total data control and logging hardware/software solution for air
quality and continuous emission systems, Congrego® is engineered from the ground up
to achieve accurate, reliable, real-time data logging specifically for ambient air and
continuous emission monitoring systems.
WHY CONGREGO®
?
• Designed by environmental monitoring experts specifically for air quality & continuous emissions systems
• Simple set-up & easy to install with an intuitive & customizable user interface
• Compatible with a wide range of analogue & digital monitoring instruments from different equipment manufacturers
• Fulfills the “traceability of records” requirement of ISO 17025
• Remote control of monitoring instruments
• Automated alarms & alerts on user interface
• Works with or without a live internet connection
• Secure platform with enhanced security features
• Seamless integration & configuration with Airodis™ data collection, validation & reporting software
CRUCIAL DATA CAPTURE
You’ve made a significant investment in your monitoring equipment, so you need absolute trust and confidence that the data logging solution you
implement will capture your crucial data.
Designed and engineered in Belgium by European Tech Serv nv (ETS) | Sparkevaardekenstraat 3, BE 8600 Diksmuide www.etserv.be
9. [DATA MANAGEMENT SYSTEM] AIRODIS
DATA COLLECTION, VALIDATION AND REPORTING
Powerful software for environmental data analysis.
Airodis provides the user with the ability to automatically retrieve data from a wide
variety of instruments and data loggers, perform audited automatic and manual data
validation and generate a wide range of graphical and tabular reports.
Airodis operates on Windows operating systems and uses a SQL Server database.
Supporting single or multi user installations Airodis provides the user with the most
stable, streamlined and easy to use package available.
Multiple users can interrogate data contained within the SQL database and data can
easily be presented on interactive websites for public or internal display.
The Airodis design encapsulates Ecotech's 35 years’ experience in the development of
software and experience that Ecotech has operating one of the world's largest networks
of ISO17025 accredited monitoring systems.
DATA COLLECTION
Airodis™ streamlines the data collection process by automatically or manually downloading data from multiple loggers and saving it into an SQL Server
database. Data can be collected from a wide variety of loggers over multiple communication media. CSV file import is also supported and
communication scripts for non-supported data loggers can easily be produced.
OTHER BENEFITS INCLUDE:
Download periods as frequent as 10 seconds • Database support for the MS SQL database supplied as standard with the SQL Server 2008 R2 Express
database • Modem pools fully supported • Full automation of data collection process. Communication media supported includes: • RS232 and TCP/IP
• 3G, 4G and dial up network • IPv4 / IPv6 networking • Radio network.
Designed and engineered in Belgium by European Tech Serv nv (ETS)
Sparkevaardekenstraat 3, BE 8600 Diksmuide www.etserv.be