Concentrated solar thermal
•
0 j'aime•131 vues
This document provides specifications for a fully automated concentrated solar thermal (CST) dish system. The system uses dual-axis tracking dishes between 7-16 square meters in size to generate steam at 120-170°C and up to 10 bar pressure, producing up to 44kg of steam per day. Key components include microcontroller-based electronic controllers, linear actuators, a galvanized steel structural frame, and IP65/67-rated dust and water protection for long-term reliability and low maintenance in outdoor conditions. Similar systems have been installed at IIM Bangalore and use proven concentrated parabolic trough technology.
Signaler
Partager
Signaler
Partager
Télécharger pour lire hors ligne
Recommandé
Attsu steam boilers faqs october 2020
Thermography can be used in preventative maintenance of industrial steam boilers to identify temperature anomalies and areas for improved performance. Industrial boilers made by ATTSU are customized to customer needs and processes, with considerations for output, pressure, steam production, and continuous working temperature. Three-pass steam boilers have combustion gases circulate through three parts - the combustion chamber, inversion chamber, and rear gas chamber - allowing them to absorb production peaks due to larger water volumes that can evaporate into steam.
Sustained power generation from low-grade heat. sk 270513
Minimal estimation for waste heat utilization in Russia is about $300M annually. From more then 4000 GPU we can utilize up to 18 GW additional electric power.
Various heat sources require different technical solutions. Heat-El fits for all.
Development of a 300 kWe Integrated Axial Turbine and Generator for ORC Appli...
2nd International Seminar on ORC Power Systems: Turbo Expanders II, Rotterdam, The Netherlands
Publisher: ASME, International Gas Turbine Institute (IGTI)
Abstract
Concepts NREC has completed its design and development of an integrated high speed axial turbine and permanent magnet generator. The Turbine –Generator Unit (TGU) is ideal for ORC applications for its compactness, reliability, and versatility. The 20,000 rpm TGU does not use a shaft seal or gearbox and the generator is evaporatively cooled using the ORC working fluid. The TGU is designed with the intent of having the same turbine housing and generator used with a range of operating ORC fluid operating pressures and temperatures to enable its wide spread use in a variety of ORC heat recovery applications. The rotor and nozzle stators are changed to aerodynamically optimize the performance of the turbine at different ORC fluid operating conditions and flow rates. The output voltage of the generator can range from 300 to 480 VAC and at 50 hz and 60 hz. This facilitates its use in waste heat recovery applications throughout the world. This technical paper will review the mechanical and electrical design features of the turbine-generator unit.
Thermo-Economic Optimization of Subcritical and Transcritical ORC Systems
This document summarizes a thermo-economic optimization of subcritical and transcritical organic Rankine cycle (ORC) systems for low-temperature heat sources between 100-150°C. The authors developed models for ORC components like heat exchangers and turbines to evaluate seven working fluids. Genetic algorithms optimized cycle parameters to minimize specific investment costs. Results showed transcritical cycles with R1234ze(e) and R1233zd(e) had the lowest costs, around 2000€/kWe for a 150°C heat source. A breakdown of costs for R1234ze(e) at 150°C showed a total investment of 941k€ and net power of 604kW.
HEAT PUMP BY ER SOHEL R SHEIKH
A heat pump is a device that provides heat energy from a source of heat to a destination called a "heat sink". Heat pumps are designed to move thermal energy opposite to the direction of spontaneous heat flow by absorbing heat from a cold space and releasing it to a warmer one. A heat pump uses some amount of external power to accomplish the work of transferring energy from the heat source to the heat sink.
While air conditioners and freezers are familiar examples of heat pumps, the term "heat pump" is more general and applies to many HVAC (heating, ventilating, and air conditioning) devices used for space heating or space cooling. When a heat pump is used for heating, it employs the same basic refrigeration-type cycle used by an air conditioner or a refrigerator, but in the opposite direction - releasing heat into the conditioned space rather than the surrounding environment. In this use, heat pumps generally draw heat from the cooler external air or from the ground.[1] In heating mode, heat pumps are three to four times more efficient in their use of electric power, than are simple electrical resistance heaters.
Tessol presentation - 31.5.13
Thermal Energy Service Solutions Pvt. Ltd. (TESSOL) provides thermal energy storage solutions for commercial and industrial applications. TESSOL offers direct, cascaded, and passive thermal storage systems using phase change materials. Direct systems store energy at the application temperature, cascaded systems improve efficiency and capacity during peak times, and passive systems prevent temperature variations and provide backup. TESSOL's solutions lower costs by utilizing off-peak energy and reducing equipment size.
Cogeneration: regional experiences
The document discusses cogeneration systems which simultaneously generate steam and electricity. Cogeneration is more economical than separate heat and power generation as it makes use of by-product electric power. The key factors that influence cogeneration economics include steam parameters, power demand, and efficiency of the boiler and turbine generator. Cogeneration offers benefits for various industries like sugar mills that require both steam and power.
Automobile air conditioning based on VAC using exhaust heat
The theoretical analysis, the feasibility of such a system in a positive frame. It can be summarized that: In the exhaust gases of motor vehicles, there is enough heat energy that can be utilized to power an air-conditioning system. Therefore, if air-conditioning is achieved without using the engine’s mechanical output, there will be a net reduction in fuel consumption and emissions. Once a secondary fluid such as water or glycol is used, the aqua-ammonia combination appears to be a good candidate as a working fluid for an absorption car air-conditioning system. This minimizes any potential hazard to the passengers. The low COP value is an indication that improvements to the cycle are necessary. A high purity refrigerant would give a higher refrigeration effect, while the incorporation of a solution heat exchanger would reduce the input heat to the generator. The present system has both a reflux condenser and a heat exchanger. However, the reflux condenser is proved inadequate to provide high purity of the refrigerant and needs to be re-addressed. The evaluation of the COP, with and without the heat exchanger also proves that unless there is a high purity refrigerant, the effect of the heat exchanger to the generator’s heat is small.
Recommandé
Attsu steam boilers faqs october 2020
Thermography can be used in preventative maintenance of industrial steam boilers to identify temperature anomalies and areas for improved performance. Industrial boilers made by ATTSU are customized to customer needs and processes, with considerations for output, pressure, steam production, and continuous working temperature. Three-pass steam boilers have combustion gases circulate through three parts - the combustion chamber, inversion chamber, and rear gas chamber - allowing them to absorb production peaks due to larger water volumes that can evaporate into steam.
Sustained power generation from low-grade heat. sk 270513
Minimal estimation for waste heat utilization in Russia is about $300M annually. From more then 4000 GPU we can utilize up to 18 GW additional electric power.
Various heat sources require different technical solutions. Heat-El fits for all.
Development of a 300 kWe Integrated Axial Turbine and Generator for ORC Appli...
2nd International Seminar on ORC Power Systems: Turbo Expanders II, Rotterdam, The Netherlands
Publisher: ASME, International Gas Turbine Institute (IGTI)
Abstract
Concepts NREC has completed its design and development of an integrated high speed axial turbine and permanent magnet generator. The Turbine –Generator Unit (TGU) is ideal for ORC applications for its compactness, reliability, and versatility. The 20,000 rpm TGU does not use a shaft seal or gearbox and the generator is evaporatively cooled using the ORC working fluid. The TGU is designed with the intent of having the same turbine housing and generator used with a range of operating ORC fluid operating pressures and temperatures to enable its wide spread use in a variety of ORC heat recovery applications. The rotor and nozzle stators are changed to aerodynamically optimize the performance of the turbine at different ORC fluid operating conditions and flow rates. The output voltage of the generator can range from 300 to 480 VAC and at 50 hz and 60 hz. This facilitates its use in waste heat recovery applications throughout the world. This technical paper will review the mechanical and electrical design features of the turbine-generator unit.
Thermo-Economic Optimization of Subcritical and Transcritical ORC Systems
This document summarizes a thermo-economic optimization of subcritical and transcritical organic Rankine cycle (ORC) systems for low-temperature heat sources between 100-150°C. The authors developed models for ORC components like heat exchangers and turbines to evaluate seven working fluids. Genetic algorithms optimized cycle parameters to minimize specific investment costs. Results showed transcritical cycles with R1234ze(e) and R1233zd(e) had the lowest costs, around 2000€/kWe for a 150°C heat source. A breakdown of costs for R1234ze(e) at 150°C showed a total investment of 941k€ and net power of 604kW.
HEAT PUMP BY ER SOHEL R SHEIKH
A heat pump is a device that provides heat energy from a source of heat to a destination called a "heat sink". Heat pumps are designed to move thermal energy opposite to the direction of spontaneous heat flow by absorbing heat from a cold space and releasing it to a warmer one. A heat pump uses some amount of external power to accomplish the work of transferring energy from the heat source to the heat sink.
While air conditioners and freezers are familiar examples of heat pumps, the term "heat pump" is more general and applies to many HVAC (heating, ventilating, and air conditioning) devices used for space heating or space cooling. When a heat pump is used for heating, it employs the same basic refrigeration-type cycle used by an air conditioner or a refrigerator, but in the opposite direction - releasing heat into the conditioned space rather than the surrounding environment. In this use, heat pumps generally draw heat from the cooler external air or from the ground.[1] In heating mode, heat pumps are three to four times more efficient in their use of electric power, than are simple electrical resistance heaters.
Tessol presentation - 31.5.13
Thermal Energy Service Solutions Pvt. Ltd. (TESSOL) provides thermal energy storage solutions for commercial and industrial applications. TESSOL offers direct, cascaded, and passive thermal storage systems using phase change materials. Direct systems store energy at the application temperature, cascaded systems improve efficiency and capacity during peak times, and passive systems prevent temperature variations and provide backup. TESSOL's solutions lower costs by utilizing off-peak energy and reducing equipment size.
Cogeneration: regional experiences
The document discusses cogeneration systems which simultaneously generate steam and electricity. Cogeneration is more economical than separate heat and power generation as it makes use of by-product electric power. The key factors that influence cogeneration economics include steam parameters, power demand, and efficiency of the boiler and turbine generator. Cogeneration offers benefits for various industries like sugar mills that require both steam and power.
Automobile air conditioning based on VAC using exhaust heat
The theoretical analysis, the feasibility of such a system in a positive frame. It can be summarized that: In the exhaust gases of motor vehicles, there is enough heat energy that can be utilized to power an air-conditioning system. Therefore, if air-conditioning is achieved without using the engine’s mechanical output, there will be a net reduction in fuel consumption and emissions. Once a secondary fluid such as water or glycol is used, the aqua-ammonia combination appears to be a good candidate as a working fluid for an absorption car air-conditioning system. This minimizes any potential hazard to the passengers. The low COP value is an indication that improvements to the cycle are necessary. A high purity refrigerant would give a higher refrigeration effect, while the incorporation of a solution heat exchanger would reduce the input heat to the generator. The present system has both a reflux condenser and a heat exchanger. However, the reflux condenser is proved inadequate to provide high purity of the refrigerant and needs to be re-addressed. The evaluation of the COP, with and without the heat exchanger also proves that unless there is a high purity refrigerant, the effect of the heat exchanger to the generator’s heat is small.
Laboratory Equipments
Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double
walled thick PCRC sheet, duly painted with attractive stove enamel.
Laboratory Equipments
Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double
walled thick PCRC sheet, duly painted with attractive stove enamel.
Reflow oven (ETA A600 reflow oven with rail+mesh conveyor)
ETA A600 reflow oven with rail+mesh conveyor
Flexible software platform makes long-term stable production management easily.
(Instrument control heat automatically, ensure temperature equilibrium.Optional Computer + PID intelligent operation controller.
Temperature tolerance alarm, fault diagnosis function.
Independent cooling zone to ensure the output temperature of PCB.
www. smt11.com
www.etasmt.com
https://youtu.be/f07KGxMTRpY
Cpg 2010
This document summarizes an electric screw compressor product line from CPG. It describes the key features and benefits of the compressors, including their industrial design, filtration system, advanced controller, gear-driven transmission, cooling system, maintenance schedule, and service parts. The compressors are available in models from 280-355kW for various industries and are designed to deliver high performance compressed air efficiently over their lifetime.
Bench Top High Temperature Muffle Furnace by ACMAS Technologies Pvt Ltd.
Bench Top High Temperature Muffle Furnace by ACMAS Technologies Pvt Ltd.Acmas Technologies Pvt. Ltd.
Bench top High temperature muffles furnaces offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open coil heating elements on both sides of chamber enable rapid heating with minimal temperature gradient of 1400°C. For More Information Please Logon http://goo.gl/uSxLlWReflow Oven S-1000
The document summarizes the features and specifications of the S-1000 lead-free reflow oven produced by Southern Machinery. The S-1000 uses a PC and PLC control system to maintain temperature stability above 99.99% and features temperature zone design for optimal temperature uniformity. It is suitable for a variety of electronic manufacturing processes and complies with various industry standards. Southern Machinery provides temperature testing results showing the S-1000 meets tight tolerances for temperature accuracy and repeatability.
Eta a series reflow oven
1. The document introduces the A Series lead-free reflow oven produced by ETA for small household appliances, LED, power panels and other products.
2. The reflow oven features PID intelligent temperature control, top and bottom hot air heating zones, a transmission belt, temperature accuracy of ±1.5°C, and safety protections.
3. Specifications of models A600, A600D, A800, and A800D are provided including dimensions, weight, heating zones, power consumption, and temperature range.
Eta a series reflow oven
1. The document introduces the A Series lead-free reflow oven produced by ETA for small household appliances, LED, power panels and other products.
2. The reflow oven features PID intelligent temperature control, top and bottom hot air heating zones, a transmission belt, temperature accuracy of ±1.5°C, and safety protections.
3. Specifications of models A600, A600D, A800, and A800D are provided including dimensions, weight, heating zones, power consumption, and temperature range.
MULTIPRESS FLEXO MACHINES
MULTIPRESS FLEXO MACHINES
Multipress is a company that has been selling flexo printing machines and related conversion equipments for over 40 years. The company has evolved a unique market offering of hight quality low cost and market targetted machine ranges
Lead free reflow oven s-1000
The document describes the S-1000 lead-free reflow oven from Southern Machinery. It has maintained a large market share for many years due to its unparalleled heating performance and precise temperature control system. The reflow oven meets requirements for various welding processes. It has a new design that fully meets the needs of diverse electronic manufacturing processes. Key features include a PC and PLC control system that ensures high temperature stability and uniformity. It also has safety and monitoring functions as well as optional flux processing. The reflow oven is suitable for applications in communications, automobiles, appliances, computers and other industries.
Lead free reflow oven s-8800
The document describes the S-8800 lead-free reflow oven produced by Southern Machinery. The S-8800 is a mature product meeting market demand for lead-free reflow processes. It features a PC+PLC control system for precise temperature control and monitoring software. The oven is suitable for industries like communications, automotive electronics, and consumer products. It aims to provide stable heating performance, safety protections, and ease of use.
Flame Graphite Furnace Atomic Absorption Spectrophotometer by ACMAS Technolog...
Flame Graphite Furnace Atomic Absorption Spectrophotometer by ACMAS Technolog...Acmas Technologies Pvt. Ltd.
The document describes an atomic absorption spectrophotometer that features both flame and graphite furnace atomization. It has fully automated controls and safety protections. Key features include automatic switching between flame and furnace modes, automatic parameter optimization, and alarms for issues. It can analyze multiple elements across a wide wavelength range and has various performance specifications.Howell Machines, Hyderabad, Wood Working Machines
This document provides technical specifications for multiple pieces of woodworking machinery and equipment. It includes specifications for a vacuum membrane press, CNC router, manual honeycomb expander, protective film applicator, water spray booth, briquetting machine, and silicon sheet vacuum pumps. Key details provided include power requirements, dimensions, production capacities, and functional features.
Southern machinery catalog
Focus on SMT machine manufacturing&offering comprehensive solution in bulk LED assemble.Provide high quality replacement parts.Machine installation,repair,maintenance,Pre-sales and after sales service.
Lead free reflow oven s-8800 E
S-8800-E Lead-free reflow is high-end reflow products committed to keeping up with market demand to enhance customers competitiveness.Its new design concept fully meets the needs of increasingly diverse processes, And considering the future direction of the industry, entirely suitable for communications, automotive electronics, home appliances, computers and other consumer electronic products .
AccuThermo AW 820V Vacuum Rapid Thermal Anneal Equipment
The AccuThermo AW820V is a stand alone Vacuum RTP (Rapid Thermal Processing) system, which uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 900 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
Programmable large-size-shaking-incubator
This document describes a programmable large size shaking incubator. It has a temperature range of 10-60°C, speeds of 10-350 RPM, and programmable temperature and timer functions. The incubator uses a brushless DC motor and PID controller to precisely control shaking and temperature for growing bacteria, yeast, and other cells.
Computer controlled benchtop muffle furnace
Computerized bench-top muffle furnace is a CE certified & computerized benchtop high temperature muffle furnace with laptop and pre-installed control software.
Ventilation
The document summarizes ventilation units from Dantherm A/S including VentR and VentC units. VentR units are suitable for comfort ventilation with up to 80% heat recovery efficiency and small dimensions. VentC units are suitable for industrial ventilation where fresh and exhaust air should not mix, with 55-65% efficiency. The document describes the unit construction, fans/motors, heat exchangers, filters, controls, advantages over other units, and Dantherm's calculation program for unit selection.
Delta ia mds-ct2000_c_en_20160413
The document provides information about the CT2000 Series industrial drives from Delta Textile including:
- Fanless and wall mount installation models for use in harsh environments to prevent fiber/dust buildup.
- Deceleration Energy Backup function to allow smooth motor stopping in the event of a power outage.
- Built-in PLC and RS-485 communication for simple network control without extra modules.
- Modular design with optional communication, I/O, and feedback cards for customization.
- Rated for use in textile, ceramic, glass and other demanding industries.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Contenu connexe
Similaire à Concentrated solar thermal
Laboratory Equipments
Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double
walled thick PCRC sheet, duly painted with attractive stove enamel.
Laboratory Equipments
Light weight with ceramic wool insulation (instead of Brick insulation). The outer casting is made of double
walled thick PCRC sheet, duly painted with attractive stove enamel.
Reflow oven (ETA A600 reflow oven with rail+mesh conveyor)
ETA A600 reflow oven with rail+mesh conveyor
Flexible software platform makes long-term stable production management easily.
(Instrument control heat automatically, ensure temperature equilibrium.Optional Computer + PID intelligent operation controller.
Temperature tolerance alarm, fault diagnosis function.
Independent cooling zone to ensure the output temperature of PCB.
www. smt11.com
www.etasmt.com
https://youtu.be/f07KGxMTRpY
Cpg 2010
This document summarizes an electric screw compressor product line from CPG. It describes the key features and benefits of the compressors, including their industrial design, filtration system, advanced controller, gear-driven transmission, cooling system, maintenance schedule, and service parts. The compressors are available in models from 280-355kW for various industries and are designed to deliver high performance compressed air efficiently over their lifetime.
Bench Top High Temperature Muffle Furnace by ACMAS Technologies Pvt Ltd.
Bench Top High Temperature Muffle Furnace by ACMAS Technologies Pvt Ltd.Acmas Technologies Pvt. Ltd.
Bench top High temperature muffles furnaces offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. Open coil heating elements on both sides of chamber enable rapid heating with minimal temperature gradient of 1400°C. For More Information Please Logon http://goo.gl/uSxLlWReflow Oven S-1000
The document summarizes the features and specifications of the S-1000 lead-free reflow oven produced by Southern Machinery. The S-1000 uses a PC and PLC control system to maintain temperature stability above 99.99% and features temperature zone design for optimal temperature uniformity. It is suitable for a variety of electronic manufacturing processes and complies with various industry standards. Southern Machinery provides temperature testing results showing the S-1000 meets tight tolerances for temperature accuracy and repeatability.
Eta a series reflow oven
1. The document introduces the A Series lead-free reflow oven produced by ETA for small household appliances, LED, power panels and other products.
2. The reflow oven features PID intelligent temperature control, top and bottom hot air heating zones, a transmission belt, temperature accuracy of ±1.5°C, and safety protections.
3. Specifications of models A600, A600D, A800, and A800D are provided including dimensions, weight, heating zones, power consumption, and temperature range.
Eta a series reflow oven
1. The document introduces the A Series lead-free reflow oven produced by ETA for small household appliances, LED, power panels and other products.
2. The reflow oven features PID intelligent temperature control, top and bottom hot air heating zones, a transmission belt, temperature accuracy of ±1.5°C, and safety protections.
3. Specifications of models A600, A600D, A800, and A800D are provided including dimensions, weight, heating zones, power consumption, and temperature range.
MULTIPRESS FLEXO MACHINES
MULTIPRESS FLEXO MACHINES
Multipress is a company that has been selling flexo printing machines and related conversion equipments for over 40 years. The company has evolved a unique market offering of hight quality low cost and market targetted machine ranges
Lead free reflow oven s-1000
The document describes the S-1000 lead-free reflow oven from Southern Machinery. It has maintained a large market share for many years due to its unparalleled heating performance and precise temperature control system. The reflow oven meets requirements for various welding processes. It has a new design that fully meets the needs of diverse electronic manufacturing processes. Key features include a PC and PLC control system that ensures high temperature stability and uniformity. It also has safety and monitoring functions as well as optional flux processing. The reflow oven is suitable for applications in communications, automobiles, appliances, computers and other industries.
Lead free reflow oven s-8800
The document describes the S-8800 lead-free reflow oven produced by Southern Machinery. The S-8800 is a mature product meeting market demand for lead-free reflow processes. It features a PC+PLC control system for precise temperature control and monitoring software. The oven is suitable for industries like communications, automotive electronics, and consumer products. It aims to provide stable heating performance, safety protections, and ease of use.
Flame Graphite Furnace Atomic Absorption Spectrophotometer by ACMAS Technolog...
Flame Graphite Furnace Atomic Absorption Spectrophotometer by ACMAS Technolog...Acmas Technologies Pvt. Ltd.
The document describes an atomic absorption spectrophotometer that features both flame and graphite furnace atomization. It has fully automated controls and safety protections. Key features include automatic switching between flame and furnace modes, automatic parameter optimization, and alarms for issues. It can analyze multiple elements across a wide wavelength range and has various performance specifications.Howell Machines, Hyderabad, Wood Working Machines
This document provides technical specifications for multiple pieces of woodworking machinery and equipment. It includes specifications for a vacuum membrane press, CNC router, manual honeycomb expander, protective film applicator, water spray booth, briquetting machine, and silicon sheet vacuum pumps. Key details provided include power requirements, dimensions, production capacities, and functional features.
Southern machinery catalog
Focus on SMT machine manufacturing&offering comprehensive solution in bulk LED assemble.Provide high quality replacement parts.Machine installation,repair,maintenance,Pre-sales and after sales service.
Lead free reflow oven s-8800 E
S-8800-E Lead-free reflow is high-end reflow products committed to keeping up with market demand to enhance customers competitiveness.Its new design concept fully meets the needs of increasingly diverse processes, And considering the future direction of the industry, entirely suitable for communications, automotive electronics, home appliances, computers and other consumer electronic products .
AccuThermo AW 820V Vacuum Rapid Thermal Anneal Equipment
The AccuThermo AW820V is a stand alone Vacuum RTP (Rapid Thermal Processing) system, which uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 900 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
Programmable large-size-shaking-incubator
This document describes a programmable large size shaking incubator. It has a temperature range of 10-60°C, speeds of 10-350 RPM, and programmable temperature and timer functions. The incubator uses a brushless DC motor and PID controller to precisely control shaking and temperature for growing bacteria, yeast, and other cells.
Computer controlled benchtop muffle furnace
Computerized bench-top muffle furnace is a CE certified & computerized benchtop high temperature muffle furnace with laptop and pre-installed control software.
Ventilation
The document summarizes ventilation units from Dantherm A/S including VentR and VentC units. VentR units are suitable for comfort ventilation with up to 80% heat recovery efficiency and small dimensions. VentC units are suitable for industrial ventilation where fresh and exhaust air should not mix, with 55-65% efficiency. The document describes the unit construction, fans/motors, heat exchangers, filters, controls, advantages over other units, and Dantherm's calculation program for unit selection.
Delta ia mds-ct2000_c_en_20160413
The document provides information about the CT2000 Series industrial drives from Delta Textile including:
- Fanless and wall mount installation models for use in harsh environments to prevent fiber/dust buildup.
- Deceleration Energy Backup function to allow smooth motor stopping in the event of a power outage.
- Built-in PLC and RS-485 communication for simple network control without extra modules.
- Modular design with optional communication, I/O, and feedback cards for customization.
- Rated for use in textile, ceramic, glass and other demanding industries.
Similaire à Concentrated solar thermal (20)
Reflow oven (ETA A600 reflow oven with rail+mesh conveyor)
Reflow oven (ETA A600 reflow oven with rail+mesh conveyor)
Bench Top High Temperature Muffle Furnace by ACMAS Technologies Pvt Ltd.
Bench Top High Temperature Muffle Furnace by ACMAS Technologies Pvt Ltd.
Flame Graphite Furnace Atomic Absorption Spectrophotometer by ACMAS Technolog...
Flame Graphite Furnace Atomic Absorption Spectrophotometer by ACMAS Technolog...
AccuThermo AW 820V Vacuum Rapid Thermal Anneal Equipment
AccuThermo AW 820V Vacuum Rapid Thermal Anneal Equipment
Dernier
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Dernier (20)
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Concentrated solar thermal
- 1. SOLAR THERMAL FULLY AUTOMATED CST DISHES
- 2. Temperature Pressure Generation Operation 120°C-170°C Up to 10 bar Up to 44kg of steam per day per dish Fully automated dual-axis tracking Specifications CST Performance
- 3. Mounting Frame Dish Size Mirrors Fixing Mounting Pole Bearing Mechanism Wind Protection Platform Civil Work 7m2, 10m2, 16 m2 Minimum corrosion, edgework possible Special aluminum track bolted to mirrors Vertical pole mount Universal joint bearing for dual-axis Up to 200 kmph I-beam interlinking platform support Concrete roof or platform support Dishes and Structural Frame Dishes
- 4. Electronic Controller Efficiency Data Logging Microcontroller Core Technology System Availability Communication System Time Tracking Accuracy Feedback Dual-axis control Net Energy Consumed Features 18-40% with full automation 3 day storage cycles. Auto-graph High cache memory. Faster processing Location agnostic (PLUG & PLAY) 10 hours run. Auto-sleep CAN Bus. RS232/RS485. (DATA LOG) Auto Time zone Correct/0.1 Degrees Limit & angle tilt feedback system Variable daily tilt (FORWARD,REVERSE) Seasonal tilt with full automation DC Brush. CE Certified. 12V/24V DC input <10A consumption. High Torque motor with IP65 protection all round Dual- Axis Tracking Mechanism Linear Actuator
- 5. Structural Frame Linear Actuator Dust Durability IP65, IP67 protection from total dust ingress. Protected from pressure water jets from any direction and ingress protection. Yearly once greasing. Galvanized steel with precise zinc-coating thickness for extreme Indian conditions- sand, corrosion, sunlight and rain protection. Frictionless bearings that require minimum to no lubrication and improve tracker reliability. Pole mount bolted on platform base for easy install. Modular mirrors for faster install. Environmental Protection of Components Electronic Controller Dust Water Maintenance Frame Bearing Mechanism Installation IP65, IP67 protection standard to protect against immersion in depth and against dust ingress. Electromagnetic Interference (EMI) protection for better component reliability in field. Rugged sensor feedback systems for highly accurate tracking.
- 6. Projects IIM Bangalore 6 CSP Dishes (Dual-axis automation)
- 7. Similar projects Concentrated Parabolic Trough (CPT) technology
- 9. Clientele