1. SHD Series 72channel (144 fiber) 1 RU LC patch panel
SHD cabled with Push-Pull LC connectors
Also consider cabling with the LC-HD
Design incorporates the new
Front View three channel LC coupler which
is available in shuttered and
non shuttered versions
Rear View
• Highest density in the enterprise marketplace 72 channels in 1RU
• Constructed with Elite MTP ribbon 12 fiber or 24 fiber ferrules (non-cassette version)
• Available in 10Gig ( LC –MTP), 40 Gig ( MTP- MTP 12 fiber) & 100Gig (MTP-MTP 24 fiber)
• Superior cable management scheme over cassette style solutions with increased functionally
• Lower cost over cassette style construction
2. New LC-HD Connector
Single-body LC-HD duplex style with DFX cable LC-HD duplex with Zip cable
• Designed for High density applications
•Easy to release trigger
• Pull tabs available in three different lengths
and multiple colors
• 60%increase in density as adapter spacing is
no longer dependent on finger spacing
previously needed to reach LC clip Pull tab has room to affix I.D. label
Flexible pull tab allows for the connector
to be easily disengaged from high density
patch panels and switches without the
need of special tools
3. EHD Series
Extreme High Density Patch Panels
A Ribbon Array fiber optic modular patch panel solution providing the highest density
application in the marketplace. The EHD Series allows an increased connectivity footprint.
The front and rear access design facilitates an easy approach to MACs (moves, adds, and
changes) when used in conjunction with MTP small diameter sub unitized trunk cables
constructed with low loss MTP elite ferrules. For Data Center SAN applications, modular
cassettes are constructed with OM4 fiber optic cable to ensure optimal signal strength as
infrastructures migrate from 10GbE to 40GbE/100GbE applications.
Available configurations: Design Benefits:
• 1U 72 channels (144 fibers) • Low loss MTP elite couplers (rear of cassette)
• 2U 144 channels (288 fibers) • Low loss LC single-mode couplers (front of cassette)
• 4U 288 channels (576 fibers) • Integrated cable management & RFID enabled
front view of cassettes
cable entry and exit points
front view of patch panel with
rear view depicting MTP trunk connectivity
LC/MTP modular cassettes
4. EHD Plus Series
A Ribbon Array fiber optic modular patch panel solution providing the highest density application in the
marketplace: 1RU 72 channels (144 fibers). The front and rear access design facilitates an easy approach
to MACs (moves, adds, and changes) when used in conjunction with HD small diameter sub unitized
trunk cables. For Data Center SAN applications, modular cassettes are constructed with OM4 fiber optic
cable to ensure optimal signal strength as infrastructures migrate from 10GbE to 40GbE/100GbE
• Accepts 12 cassettes for either144 fiber (72 channels) LC’s
or 48 MTP’s in a 1RU configuration currently the highest
density achievable in the marketplace.
• 3 Tier coupling to cassettes for vertical separation of
entry/exit cables
• Labeling fields located on inside front cover
cable entry and exit points
3 tier coupling mechanism Chassis slides forward Cable storage at Permanent clamp
has waterfalls for either up for ease of service rear allows for fixes sub groups
or down vertical exit path cassette travel in position
5. EHD Plus Series cassettes
MTP Connectivity scheme for Migration from 10G Ethernet to 40/100 G
MTP – LC Cassette
10G Ethernet applications
Used with 144 fiber cable for complete
panel population
Upgradable to 40/100G for future
applications
6 TX/RX LC pairs per cassette
MTP – MTP Cassette
40/100G Ethernet applications
4 MTP to MTP interfaces
12-fiber MTP for 40G
24-fiber for 100G
40G Upgradable to 100G
6. EHD Plus Series Cassettes
General Characteristics
Bow Clip Capture Mechanism
• Allows easy cassette motion
• No inhibiting latch
• Bow falls into slots as it travels along
panel guide features
Integrated Pull-tab feature
• Allows for easy removal of cassette
without disturbing neighboring cassettes
Integrated Cable Management
• Left or right exit directivity
• Couples to panel cable management