THE POWER STONE® reboots remote equipment by phone! The Power Stone(PST59102) is a phone call activated remote power switch that saves time and money. Eliminate costly, remote site service calls--reboot AC equipment by phone.

1.
The Power Stone®
Remote AC Power Controller
Reset/Reboot Equipment with any Touch Tone Telephone
Benefits Features
• Saves Money ‐ The Power Stone pays The Power Stone is a phone call‐activated
for itself with one saved service visit AC power controller used to reboot and FULLY PROGRAMMABLE
• Reduces Downtime ‐ One phone call power up/down remote equipment. Control and program via touch tones. No
can correct problem equipment in Connect The Power Stone to on‐site software or drivers to install.
minutes equipment and a phone line to gain
• Protects Equipment ‐ Leave complete power control anywhere you can AUTOMATIC MODE
equipment “off” until needed. place a phone call. The Power Stone does The Power Stone is automatically
Reduces power consumption and not require a dedicated phone line to activated by an inbound call and
hacker exposure operate. It easily installs on an existing line. executes user‐defined power command.
• Application Flexibility – Automatic
and Manual operations for versatility The Power Stone is the tool of choice for MANUAL OVER‐RIDE BUTTON
in a variety of applications equipment support applications. There is One touch for uninterrupted power.
no longer a need to send a repairman to a
remote site when equipment requires little 120 VOLT, 15 AMP RATING
Tackles the most demanding power
Applications more than a power reset.
applications.
Routers
DSL Modems With a variety of operating modes, The
Power Stone has the flexibility to handle PROGRAMMABLE SECURITY
Automated Teller Machines ACCESS CODES
Internet Kiosks virtually any remote power application. A
user‐defined security code provides User defined access codes provide
Leased Telephone Systems security and control.
Network Equipment customized protection for your application.
Digital Video Recorders
The Power Stone can turn on power to idle
NON‐VOLATILE MEMORY
Voicemail Systems Preserves programming in power outage.
Equipment Under Service Warranty equipment as the situation demands. Data
collection and telemetry equipment can
Out‐of‐Band Network Management INSTALLS ON EXISTING PHONE
remain off during idle time. Leaving
LINE
equipment turned off until power is
No need for dedicated phone line.
Product Overview needed reduces electricity consumption
Control electrical power on remote site and equipment wear. REMOTE PROGRAMMING AND
equipment by phone with The Power DIAGNOSTICS
Stone® from Multi‐Link, Inc. Save time, travel and maintenance costs by Our tech support team is available toll‐
eliminating service calls. Technicians can free to program The Power Stone over
check current power, or if there has been a the phone.
past power outage, from any telephone.
ONE YEAR LIMITED WARRANTY

2.
Application Flexibility Ask our technicians
The Power Stone has the flexibility to tackle the most Our staff of technicians is available to answer any
demanding remote applications. Select from Automatic questions you may have about programming or
or Manual operations. installation. We can even test and program your unit over
the phone! We are available before and after the sale to
Automatic Operation ensure your satisfaction and optimal performance for
The Power Stone will control power automatically upon your application.
detecting the rings from an inbound call. Choose “Rings‐
to‐trip” or “Constant on/off” settings: TOLL FREE: 800.535.4651
International: +1 859.885.6363
• Power on Call ‐ The Power Stone supplies power during techsupport@multi­link.net
the call, then powers down two minutes after the call sales@multi­link.net
terminates.
• Reboot ‐ Detecting a call, The Power Stone interrupts
power for 15 seconds, then supplies power again.
• Toggle ‐ With each incoming call, The Power Stone
supplies or cuts power to the connected device.
• Constant Mode ‐ The Power Stone ignores call activity,
and stays “constant on” or “constant off” until you
manually change operation.
Manual Operation
Call in to The Power Stone from any touch tone phone to
manually control power or change automatic settings.
Pass code protected.
TECHNICAL SPECIFICATIONS
Model Number PST59102 Switching Manual Key Pad 4 or 6 digit security
Power 120 VAC plug in (60 Hz) code command (on/off)
Switching Contact 120/12 VAC 15A with reset Manual Override Push button (on/normal
breaker 1800W, 600W operation)
incandescent. Power and Relay Status LED; Remote audible read‐
Interrupt Modes Automatic on ring detection. back
Manual pick up with security Ringer Equivalence 1.1 B
code.
Switching Auto Reboot (15 sec off, then on) Physical: 3.4" W x 1.8" D x 6" H, 1 lb
Toggle (on or off)
Power on call then off after
hang up + 2 min.
Multi‐Link, Inc.
225 Industry Parkway | Nicholasville, KY | 40356 USA
Sales and Tech Support 800.535.4651
FAX 859.885.6619
www.multi‐link.net
Copyright © 2009 Multi‐Link, Inc. 2009
The Power Stone® is a registered trademark of Multi‐Link, Inc.