1. Absolute Evo'09
The Next Generation
4C87-2018-2045-477K-055X-403E-9539-**** (*)
Windows XP 5.1
IA32
WinAspi: ahead WinASPI: File 'C:Program FilesNeroNero 7CoreWnaspi32.dll':
Ver=2.0.1.74, size=164112 bytes, created 2/11/2547 12:54:32
NT-SPTI used
Nero Version: 7.5.13.1
Internal Version: 7, 5, 13, 1
(Nero Express)
Recorder:
<TSSTcorp CDDVDW SH-S223F>Version: SB02 - HA 1 TA 0 7.5.13.1
Adapter driver:
<IDE>
HA 1
Drive buffer :
2048kB
Bus Type
:
default (0) -> ATAPI, detected: ?
CD-ROM:
<TSSTcorp CDDVDW SH-S223F >Version: SB02 - HA 1 TA 0 7.5.13.1
Adapter driver:
<IDE>
HA 1
=== Scsi-Device-Map ===
DiskPeripheral
: ST3160815AS
On
CdRomPeripheral
: TSSTcorp CDDVDW SH-S223F
On
=== CDRom-Device-Map ===
TSSTcorp CDDVDW SH-S223F
=======================
E:
atapi Port 0 ID 0
DMA:
atapi Port 1 ID 0
DMA:
CDRom0
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE
: 0
Physical memory
: 1022MB (1046956kB)
Free physical memory: 661MB (677116kB)
Memory in use
: 35 %
Uncached PFiles: 0x0
Use Inquiry
: 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.1.2012
===== Disc-Copy over image - 1st step : Copy to image
...
14:27:12
#1 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
14:27:12
#2 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
14:27:18
#3 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
14:27:19
#4 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
14:27:19
#5 Text 0 File DVDCopy.cpp, Line 319
2. Blank
Blank
Blank
Blank
Blank
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start
0 Len
656 NWA
0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T02 Con 0x14 Start
672 Len
32 NWA
0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T03 Con 0x14 Start
720 Len 1097408 NWA
0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T04 Con 0x14 Start 1098144 Len
32 NWA
0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T05 Con 0x14 Start 1098192 Len 1165184 NWA
0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
14:27:19
Max
1:
opt 0 (no
2:
opt 0 (no
3:
opt 0 (no
4:
opt 0 (no
5:
opt 0 (no
#6 Text 0 File DVDCopy.cpp, Line 434
-1 tracks of 5 allowed to copy
0 656 =
656, TRM_DATA_MODE1,
read options)
672 704 =
32, TRM_DATA_MODE1,
read options)
720 - 1098128 = 1097408, TRM_DATA_MODE1,
read options)
1098144 - 1098176 =
32, TRM_DATA_MODE1,
read options)
1098192 - 2263376 = 1165184, TRM_DATA_MODE1,
read options)
-1 (gap
0)
-1 (gap
16)
-1 (gap
16)
-1 (gap
16)
-1 (gap
16)
block size 2048, read
block size 2048, read
block size 2048, read
block size 2048, read
block size 2048, read
14:27:19
#7 Text 0 File Burncd.cpp, Line 3467
Turn on Track-At-Once, using DVD-R/RW media
14:27:19
#8 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written:
2263375 (502:58.25, 4420MB)
14:27:19
#9 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
14:27:19
#10 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
14:27:19
#11 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 672 (672) = #672/0:8.72
not relocatable, disc pos for caching/writing not required/not
required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 672
blocks [Image Recorder]
1: TRM_DATA_MODE1 (2 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #672 + 48 (48) = #720/0:9.45
not relocatable, disc pos for caching/writing not required/not
required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 48
blocks [Image Recorder]
2: TRM_DATA_MODE1 (3 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #720 + 1097424 (1097424) = #1098144/244:1.69
not relocatable, disc pos for caching/writing not required/not
required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
1097424 blocks [Image Recorder]
3: TRM_DATA_MODE1 (4 - Data (mode 1))
3. required
2 indices, index0 (0) not provided
original disc pos #1098144 + 48 (48) = #1098192/244:2.42
not relocatable, disc pos for caching/writing not required/not
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 48
blocks [Image Recorder]
4: TRM_DATA_MODE1 (5 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #1098192 + 1165184 (1165184) = #2263376/502:58.26
not relocatable, disc pos for caching/writing not required/not
required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
1165184 blocks [Image Recorder]
-------------------------------------------------------------14:27:19
#12 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [Image Recorder] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 5:
Idx 0
Idx 1
Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos
0
0
1376256, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos
1376256
1376256
1474560, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos
1474560
1474560
2248998912, ISRC ""
4: TRM_DATA_MODE1, 2048/0x00, FilePos
2248998912
2248998912
2249097216, ISRC ""
5: TRM_DATA_MODE1, 2048/0x00, FilePos
2249097216
2249097216
4635394048, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|
_RecDep__________
0 | lead-in |
0 |
0x41 |
0 |
0 | 0x00
0 |
1 |
0 |
0x41 |
672 |
672 | 0x00
0 |
1 |
1 |
0x41 |
672 |
672 | 0x00
672 |
2 |
0 |
0x41 |
48 |
720 | 0x00
672 |
2 |
1 |
0x41 |
48 |
720 | 0x00
720 |
3 |
0 |
0x41 | 1097424 | 1098144 | 0x00
720 |
3 |
1 |
0x41 | 1097424 | 1098144 | 0x00
1098144 |
4 |
0 |
0x41 |
48 | 1098192 | 0x00
1098144 |
4 |
1 |
0x41 |
48 | 1098192 | 0x00
1098192 |
5 |
0 |
0x41 | 1165184 | 2263376 | 0x00
1098192 |
5 |
1 |
0x41 | 1165184 | 2263376 | 0x00
2263376 | lead-out |
1 |
0x41 |
0 |
0 | 0x00
14:27:19
#13 Phase 120 File dlgbrnst.cpp, Line 1760
Creating the image for burning
14:27:19
#14 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (not relocatable, no disc pos, no patch
infos, orig at #0): write at #0
14:27:19
#15 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 1 (not relocatable, no disc pos, no patch
infos, orig at #672): write at #672
14:27:19
#16 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 2 (not relocatable, no disc pos, no patch
infos, orig at #720): write at #720
4. 14:30:24
#17 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 3 (not relocatable, no disc pos, no patch
infos, orig at #1098144): write at #1098144
14:30:24
#18 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 4 (not relocatable, no disc pos, no patch
infos, orig at #1098192): write at #1098192
14:33:05
#19 Phase 121 File dlgbrnst.cpp, Line 1760
Creating Image completed successfully
14:33:06
#20 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
14:33:11
#21 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
14:33:11
#22 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed
===== Disc-Copy over image - 2nd step : Burn the image ...
14:33:11
#1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
14:33:11
Image
MTYP:
Image
#2 IMAGEGEN -10 File ImageGen.cpp, Line 366
was written as TAO.
Mediumtype = DVD-R/RW (0x6)
file name: <D:DownloadsTempImage.nrg>
14:33:11
#3 Text 0 File Burncd.cpp, Line 3467
Turn on Track-At-Once, using DVD-R/RW media
14:34:45
#4 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written:
2263375 (502:58.25, 4420MB)
14:34:45
#5 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
14:34:45
#6 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: TSSTcorp CDDVDW SH-S223F, Media type: DVD-R
Disc Manufacturer: GSC003 Disc Application Code: 64, Disc Physical Code: 193
14:34:45
#7 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVDR/RW.)
14:34:45
#8 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 672 (672) = #672/0:8.72
not relocatable, disc pos for caching/writing not required/not
required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 656
blocks [E: TSSTcorp CDDVDW SH-S223F]
6. 14:34:45
#10 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 16 run-out blocks from end of track 1. Length: 672 -> 656.
14:34:45
#11 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 16 run-out blocks from end of track 2. Length: 48 -> 32.
14:34:45
#12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 16 run-out blocks from end of track 3. Length: 1097424 -> 1097408.
14:34:45
#13 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 16 run-out blocks from end of track 4. Length: 48 -> 32.
14:34:45
#14 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
14:34:45
#15 Phase 36 File dlgbrnst.cpp, Line 1760
Burn process started at 8x (11,080 KB/s)
14:34:45
#16 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (not relocatable, no disc pos, no patch
infos, orig at #0): write at #0
14:34:45
#17 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode for Multisession
14:34:45
#18 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 0
DVD high compatibility mode: No
14:34:45
#19 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ---Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0
(0)
Disc Size: 120 mm,
Maximum Rate: <not specified> (F h)
Number of Layers: 1,
Track Path: Parallel Track Path (PTP), Layer
Type: recordable
Linear Density:
0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/RW, DVD+R/+RW)
End Physical Sector Number of Data Area:
0 h
End Sector Number in Layer 0:
0 h (LBN: FFFD0000 h,
4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In:
0 h
Media Specific [16..63]:
00 20 01 02 04 06 08 00 - 00 00 00 00 00 00 00 00
................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
................
14:35:00
#20 Text 0 File Cdrdrv.cpp, Line 1311
14:35:00.562 - E: TSSTcorp CDDVDW SH-S223F : Queue again later
14:35:05
#21 Text 0 File DVDMinusRW.cpp, Line 587
EndTrack 1: Last written address was 655
14:35:05
#22 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 1 (not relocatable, no disc pos, no patch
infos, orig at #672): write at #672
14:35:05
#23 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode for Multisession
7. 14:35:05
#24 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 672
DVD high compatibility mode: No
14:35:05
#25 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ---Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0
(0)
Disc Size: 120 mm,
Maximum Rate: <not specified> (F h)
Number of Layers: 1,
Track Path: Parallel Track Path (PTP), Layer
Type: recordable
Linear Density:
0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/RW, DVD+R/+RW)
End Physical Sector Number of Data Area:
0 h
End Sector Number in Layer 0:
0 h (LBN: FFFD0000 h,
4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In:
0 h
Media Specific [16..63]:
00 20 01 02 04 06 08 00 - 00 00 00 00 00 00 00 00
................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
................
14:35:11
#26 Text 0 File DVDMinusRW.cpp, Line 587
EndTrack 2: Last written address was 703
14:35:11
#27 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 2 (not relocatable, no disc pos, no patch
infos, orig at #720): write at #720
14:35:11
#28 Text 0 File DVDR.cpp, Line 3092
Recording mode: Sequential Recording Mode for Multisession
14:35:11
#29 Text 0 File DVDR.cpp, Line 3248
Start write address at LBA 720
DVD high compatibility mode: No
14:35:11
#30 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ---Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0
(0)
Disc Size: 120 mm,
Maximum Rate: <not specified> (F h)
Number of Layers: 1,
Track Path: Parallel Track Path (PTP), Layer
Type: recordable
Linear Density:
0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/RW, DVD+R/+RW)
End Physical Sector Number of Data Area:
0 h
End Sector Number in Layer 0:
0 h (LBN: FFFD0000 h,
4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In:
0 h
Media Specific [16..63]:
00 20 01 02 04 06 08 00 - 00 00 00 00 00 00 00 00
................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
................
14:35:11
#31 SPTI -1023 File SCSIPassThrough.cpp, Line 179
8. CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1023)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data:
0x53 00 00 00 00 00 10 BE C0 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 2C
14:35:11
#32 CDR -1023 File ThreadedTransferInterface.cpp, Line 2050
Command sequence error
E: TSSTcorp CDDVDW SH-S223F
14:35:11
#33 TRANSFER -16 File ThreadedTransferInterface.cpp, Line 2050
Could not perform StartTrack
14:35:11
#34 Phase 38 File dlgbrnst.cpp, Line 1760
Burn process failed at 8x (11,080 KB/s)
14:35:11
#35 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
14:35:16
#36 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed
14:35:16
#37 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0
(Security Option)