The document provides an overview of CNC machine training presented by Tarun B Patel. It includes an introduction to CNC, the constructional features of CNC machines, programming formats and codes, and a demonstration of a vertical machining center. The objective is to familiarize trainees with the VMC and how to maintain it. The presentation covers the specification, elements, operations, and programming of the VMC used in the demonstration. Sample part programs are also included to illustrate linear, circular and canned cycle operations.
1. CNC MACHINE TRAININGCNC MACHINE TRAINING
MECHANICAL DEPARTMENT
DR. S & S S GHANDHY COLLEGE
SURAT
MECHANICAL DEPARTMENT
DR. S & S S GHANDHY COLLEGE
SURAT
PREPARED & PRESENTED BY:
TARUN B PATEL
PREPARED & PRESENTED BY:
TARUN B PATEL
2. OUTLINE
• INTRODUCTION OF CNC
• CONSTRUCTIONAL FEATURES
• PROGRAMING
• DEMOSTRATION OF VMC
• HANDS ON PRACTICE
4. INTRO OF CNC
• Numerical Control can be defined as an operation of machine
tools by means of specifically coded instructions to the machine
control system.
Setup time reduction
Lead time reduction
Accuracy and repeatability
Contouring of complex shapes
Simplified tooling and work holding
Consistent cutting time
General productivity increase
5. CONSTRUCTIONAL FEATURES
• PART PROGRAM
• PROGRAM INPUT DEVICE
• MACHINE CONTROL UNIT
• DRIVE SYSTEM ( SERVO MOTOR, BALL SCREW)
• MACHINE TOOL
• FEEDBACK SYSTEM
• ATC
• APC
• AUTOMATIC LUBRICATION
• HEAT REMOVAL SYSTEM
• SWARF REMOVAL
• SAFETY
9. AXIS IDENTIFICATIONS
For flat and prismatic
(block-like) parts:
Milling and drilling o/p.
For rotational parts:
Turning operations
Only x- and z-axes
10. PROGRAMMING
• PROGRAMMING FORMATS
– Tab Sequential Format
– Fixed Format
– Word Address Format
CNC SYSTEM
Format
N10 G02 M03 X10 Y-10 Z5 R10 I00 J05 K10 F200 S1000 EOB
11. G CODES
• G00 Positioning in rapid Modal
• G01 Linear interpolation Modal
• G02 Circular interpolation (CW) Modal
• G03 Circular interpolation (CCW) Modal
• G04 Dwell
• G90 ABSOLUTE DIMENTIONING MODAL
• G91 INCREMENTAL DIMENTIONING MODAL
• G54-G59 Workpiece coordinate settings Modal
• G20/G70 Inch units Modal
• G21/G71 Metric units Modal
12. • G28 Automatic return to reference point
• G29 Automatic return from reference point
• G40 Cutter compensation cancel Modal
• G41 Cutter compensation left Modal
• G42 Cutter compensation right Modal
• G43 Tool length compensation (plus) Modal
• G44 Tool length compensation (minus) Modal
• G49 Tool length compensation cancel Modal
13. M CODES
• M02 Program end
• M03 Spindle on clockwise
• M04 Spindle on counterclockwise
• M05 Spindle stop
• M06 Tool change
• M08 Coolant on
• M09 Coolant off
• M30 Program end, reset to start
18. HOW TO START VMC
• ON THE SUPPLY SWITCH
• ON STABILIZER (INDICATE 3 PHASE)
• TURN M/C SWITCH ON
• WAIT FOR LOADING ALL DATA ON M/C SCREEN
• ON THE EMERGENCY PLUG (RED COLOUR)
• PRESS RESET BUTTON
• PRESS M/C ON BUTTON