Enhancing Worker Digital Experience: A Hands-on Workshop for Partners
Electric pallet truck weighing scales
1. ED2-EPT SkidWeigh Series
Hydraulic Pressure Transducer Load Weight Measurement
Electric Pallet Truck On-board Weighing Systems
The ED2-EPT SkidWeigh Series system is general application, heavy duty fully automatic
electronic device that measures accurately the load weight on any type, model, lifting capacity
or forks lenght of the electric pallet trucks.
Automatic lift cycle of the load lift motion control and measured increase of hydraulic pressure
in the lifting cylinder will activate the specific “weighing cycle” algorithm* at sample rate of
16000 readings. The final calculation of the readings taken during the measurement cycle will
be converted into a load weight measurement that is visually presented to the operator via six
digit large LED display.
* Patent Pending
A RANGE OF SOLUTIONS TO SUIT YOUR MATERIAL HANDLING OPERATIONAL NEEDS
2. Technical Data
- Voltage from 12 to 55 V DC
- Single weighing channel
- Operating current 60mA
- Lift-n-weigh load weighing procedure
- Technology, micro controller
- Graduation, standard 5
- RS-232 port
- Readout type, large six LED digits
Optional Features
- Weighing range up to 5000 kg or lb
- Bright red display intensity
- On-board printer RS232
- Enclosure ABS, 120 x 80 x 55 mm
- Onboard label printer RS232
- Weight, 0.6kg
- Bluetooth connectivity
- Operating temperature -40 C to + 70C
- Overload warning
- Accuracy +/- 01% to 0.5 % of vehicle
Pressure Transducer
- Total accumulative load weight
- Automatic zero weight re-calibration
lifting capacity
- Main On /OFF powere switch
Pressure Transducer (Swiss Made)
- Port connection, male 1/4”-18 NPT
- Built in pressure snubber
- NEMA 4X protection
Hydraulic cylinder lift motion control
- Reverse polarity protection
- Over voltage protection
- Short circuit protection
- Housing material, Stainless steel AISI
303
- Weight 95 grams
- Installation, unrestricted
Order Number:
ED2-EPT
COMPACT SIZE & HEAVY DUTY - DESIGNED FOR MATERIAL HANDLING VEHICLE
Clear cover, impact resistant
Large bright six LED
digits display
Front cover with seamless
foam-in-place gasket
assures watertight and
dust-tight seal
Compact PC board
Universal power
supply input from
Liquid tight fitting for
12 to 55 V DC
external cable
MATERIAL HANDLING DEALER
ED2-EPT-V2-2012