furniture mounted single component task / ambient luminaires

1. Styles L201, L202 Tambour L221, L222 Task Ambient, Linear T5 Lamp
Designed to provide ambient lighting and low-glare task lighting
for horizontal worksurfaces when mounted above seated and
below standing eye height. Where privacy partitions occur,
luminaires also reduce workstation luminance ratios by softly
lighting the panel in front of the user. Style L202 features smooth
front and rear side panels. Tambour Style L222 features a
decorative, scalloped front panel and smooth rear side. Styles
L201 and Tambour L221 feature an integral mounting channel to
facilitate installation on open office furniture.

2. Styles L201, L202 ■ Lighting load as low as 0.6W per sq.ft. ■ Available in lengths from 36" to 96"
Tambour L221, L222 ■ Small profile – only 2-1/2" x 6" (6-7/16” for Tambour) ■ Anti-glare “batwing” task lens
■ Extruded aluminum housing ■ 9' power cord with molded plug
Task Ambient, Linear T5 Lamp
■ Energy efficient T5 lamp(s) and electronic ballast ■ Contoured die-cast endplates included
Typical Workstation Louvers Mounting Mounting Height
Styles L201 (pictured) and L221 are easily mounted using a variety of Three optical
hook-on panel mounting brackets. Clamp-on desk stanchions are also configurations
Panel
available for L201, L221, L202. Also, L201 and L221 can be mounted to accommodate
Hook,
various panel systems. See Mounting Accessories on page 4. 24" and
L201,
30" deep
Designed to achieve low brightness L221
worksurfaces
viewed from below standing
and mounting
eye height and deliver more
heights
candlepower near the cut-off angle.
Stanchion, between 48"
The result is higher ambient light
L201, and 66" (see
levels and better uniformity where
L202, Ordering
ceilings are low or workstations are
L221, Guide on
widely spaced.
L222 page 4).
To avoid
Task Lens discomfort
Wall glare, do not
Mount, install units
L201, below 48" or
L221 above 66".
L202
pictured
Stanchion, at left
back view,
The clear contoured lens wraps L202,
the lower half of the lamp. L222
Perpendicular prisms redirect
offending light rays so they strike
the task at an angle to the normal
sightline, substantially reducing
veiling reflections. The lens slides
along length of luminaire to
Illuminance calculations based on the Reflectances: Room 80/50/20, accommodate task positions.
Desktop 60, Partition 45. Ceiling height: 8’-0” Work Surface height: 29”
Mounting height: 54” LLF1 Tambient luminaire length: 6’-0” Batwing Task
Lens located at center of luminaire.
All illuminanace values are in Footcandles.
3/10

3. Styles L201, L202 Tambour L221, L222 Task Ambient, Linear T5 Lamp
Electrical Performance Features
Ballast: Integral electronic ballast Fillers: extruded aluminum. 3/8"
is HPF thermally protected class P, to 6" long depending on luminaire
length. Note: standard modular
120 volt. BF > 0.98. Programmed length units do not require fillers.
start maximizes lamp life and mini-
mizes energy use. Mounting brackets: Hang-on option
3500K standard output T5 lamps available for most modular furniture
systems. Order separately for
are included. 3000K and 4100K
mounting slot at rear of L201.
lamps are available on request.
UL listed, CSA certified. Louvers: High performance
for maximum uplIght
Mounting Slot (L201, coverage. Low-brightness
from below standing eye
L221) and Cord Exits height. Lift out for re-lamping
and cleaning. Housing: extruded
aluminum, radiused
180-0 Degrees, 90-270 Degrees
edges
Center lamp height position.
See Website for alternate positions
On/off switch: (optional) is
Note: Illuminance based on a minimum centered on the bottom of
of 10 workstations. Light levels will be the luminaire.
5-10% greater in large rooms with more Endplates: Task lens: clear, linear prismatic acrylic,
Integral mounting slot is workstations. stamped steel, 18" long. Slides to any position along
continuous along rear of units finished black, length to reduce veiling reflections.
Ballast factor: .98 mate with bridge
L201 and L221 accepting a variety Input Watts: 52 stanchions and Downlight reflectors:
of hang-on mounting accessories Max. Candlepower At 140 deg -629 cd end-mount specular extruded aluminum
and provides horizontal cord
management. T5 lamp(s):
Cord exit for L201 and L221 is Finishes included
concealed within rear mounting Louver tiles are specular vacuum
Personal switch for
slot. Cord can be routed dimming control (optional) Showing integral mounting
metalized polycarbonate with clear slot and mid-mount optics:
horizontally along slot without polymer topcoat for easy cleaning. Cord: 9' 18-3 SJT, molded 6” (152mm)
interfering with mounting. Specify Extruded aluminum reflectors are NEMA 5-15 grounded plug,
right- or left-hand exit. chemically brightened and clear factory installed.
2 1/2” (64mm)
Cord exits for L202 and L222 are anodized.
on the bottom of the luminaire Powdercoat finish on housing. Removable decorative endplates: L201
for end-mounting on brackets, Environmentally friendly 6-stage Included. Use where luminaire ends
located 1-1/2" (38mm) from either pre-treatment and electrostatically are not concealed by furniture. Each
end. Cord exits for desk-mount adds 3/8" to luminaire length.
applied thermoset powder coat 6 1/2” (165mm)
stanchions are located on the provides a long-lasting, scratch
2 1/2” (64mm)
rear of the luminaire, 9" (227mm) resistant finish. Choice of standard
from end for 4' luminaire, and 12" L221
colors. RAL and computer-matched Tambour
(305mm) from end for 5' luminaire. colors available on request.
Specify right- or left-hand exit.
12/09

4. Ordering Guide Mounting Accessories
Styles L201, L202 Tambour Styles L221, L222 TPH Panel Hooks, pair (L201, L221)
TPR End Mount Rail Kit, pair (L202, L222)
Type:
TPH T P
Project: Notes: System* Finish (at left)
*For compatible
Sample number: L201-71S6-M-EL15-1-1R-ES-00 furniture systems, TPH Panel Hooks mount to slotted panel
consult factory frame. Stamped and formed CRS.
TPR End Mount Rails (for 24" wide end
L 2 0 0 panels) mount to slotted panel frames.
Style Length/Lamp(s) Optic Finish Electrical Cord Cord Options Lamp Several models are available to interface
Code Exit Color with a variety of panel systems.
TPR Includes pair of black interface plates.
Style Finish Cord
L201 Task ambient luminaire with EL02 Eggshell white 90° SW rotation plug, 9 feet:
L221 integral hang-on mounting channel EL06 Dark bronze 1 Black
EL07 Silver 3 Gray TMHDW Wall Brackets, pair (L201, L221)
L202 Task ambient luminaire with EL08 Semi-gloss black 5 Beige
L222 smooth back panel EL12 British racing green 7 Chicago cord, integral T M H D W E L 0 0
EL15 Warm metallic circuit breaker, black
Length/Lamps TASL Semi-gloss slate Mount to stud-framed walls, millwork, and
straight plug, 9 feet (L202 only): TMHDW
XXXX Custom color (specify other solid surfaces. Stamped and formed CRS,
Code Length (mm) Lamp(s) Input 2 Black black.
or submit sample) 4 Gray
24S2 24" (610) 1xF14T5 14W or 4-digit RAL color code 6 Beige
36S3 35-3/4" (910) 1xF21T5 27W (color chart available) 8 Chicago cord, integral
48S4 47-1/2" (1205) 1xF28T5 33W circuit breaker, black
Electrical TSH TSH Desk Clamp Stanchion (L201, L221)
60S5 59" (1500) 1xF35T5 41W 120 V only Cord Exit TSX TSX Desk Clamp Stanchion (L202, L222)
71S6 70-3/4" (1800) 2xF21T5 49W 1 Electronic ballast R Right rear (L201, L202)
1xF21T5 T Dimming ballast for personal
83S7 82-1/2" (2095)
+ 1xF28T5
60W L Left rear (L201, L202) T S 1 9
dimming control option E Right bottom (L202 only)
95S8 94-1/4" (2395) 2xF28T5 66W Height Finish (at left)
W Left bottom (L202 only)
Other lengths and lamping are available; consult Mount to edge of worksurface – 1/2" to 3-1/4"
For L202, R and L are on dual stanchion
factory. thick. Extruded aluminum post. Resilient pads
only. E and W exits (L202) are 1-1/2" resist slippage, protect surfaces. Integral cord
Optic from end of luminaire. management. TSH19-/TSX19- places top of
Worksurface luminaire 19-1/2" above worksurface. Sold
Mounting Depth
L Low-mount
Height Options individually; some luminaires require two
24" 30" E0 None stanchions.
48" – 50" Low Low ES On/Off switch
ED Dimming switch (L201, L221 for
M Mid-mount 51" – 52" Mid Low
use with dimming ballast only)
53" – 57" Mid Mid X0 Dual stanchion predrill (L202, L222)
58" – 61" High Mid
XS Dual stanchion predrill and
integral on/off switch (L202, L222)
H High-mount 62" – 63" High/(1) High XX Custom modification (specify)
64" – 66" (1) High Lamp Color
(1) Consult factory. Notation for 00 3500K, 85 CRI
height 62” - 63’ is for L202.
To avoid glare, do not install below 48" or above 66"
Certain products illustrated may be covered by applicable patents and www.TheLightingQuotient.com
114 Boston Post Road, West Haven, Connecticut 06516, USA patents pending. These specifications supersede all prior publications and
Voice 203.931.4455 • Fax 203.934.2240 • thelightingquotient.com are subject to change without notice. © 2010 The Lighting Quotient.
3/10