Petrel hazardous area (ATEX certified) Zone 1 floodlight is extensively specified for Ex de lighting applications - Petrel hazardous area floodlights for Zone 1 lighting feature rapid re-lamping through threaded access cover, narrow/wide angle beam adjustment, symmetrical reflector and integral Ex e terminal chamber. Petrel Hazardous Area Zone 1 Flood Light (ATEX) - Ex de Floodlight for Hazardous Area Lighting Hazardous area floodlights are suitable for Zone 1 lighting and feature an adjustable beam suitable for a range of hazardous area lamps from 150 watts to 500 watts. Hazardous area floodlights are ATEX certified for use with SON, MBF and tungsten lamps in Zone 1 lighting installations. Hazardous Area Zone 1 floodlight lamp options : SON, MBI, HPMV, tungsten. Hazardous Area, Zone 1 Certification : EEx de II 2 GD IIB T2 – T3 Zone 1 Lighting, Hazardous Area (ATEX) - Ex de - Petrel Floodlight Benefits Narrow/Wide beam adjustment to focus floodlight output Low installation costs with integral 'e' terminal chamber (inexpensive glanding) Single cast body (no junction box required), more resistant to corrosion Options Pole mounting Fully angular adjustable stirrup mounting 8/150w SON-T/240/50 (150W SON version), 8/250w SON-T/240/50 (250W SON version) 8/400w SON-T/240/50 (400W SON version) 8/250w MBI-T/240/50 (250W metal halide version), 8/400w MBI-T/240/50 (400W metal halide version) 8/500w TH/240/50 (500W tungsten halogen version) 8/250w HPMV/240/50 (250W mercury vapour version), 8/400w HPMV/240/50 (400W mercury vapour version) Features 230v 50Hz - alternative voltages and frequency. -20°C to +55°C standard supply Tubular : SON, MBI, HPMV, Tungsten. Symmetrical reflector fitted to all versions (lamps not provided). Zone 1 hazardous area defines areas in which an explosive atmosphere caused by a mixture air and gases, vapours and mists is expected to occur occasionally.

1. ATEX / IECEx
CERTIFIED
8 Series Ex de Floodlight
CAT II
ZONE 1
The 8 Series is a ‘de’ certified light fitting designed for maximum light output offering a wide variety of lamps.
It offers the following benefits:

Robust, long life Zone 1 fitting

Fast re-lamping through easy access lamping port

Large range of lamp options

Easy beam focus with in-situ wide/narrow adjustment

Accurate angled mounting using optional bracket

Certified for use in gas and dust zoned applications

Replaceable glass gives longer life

Ex e terminal chamber for lower cost glanding
Typical applications
Chemical sites
Refineries
Docks / jetties
Offshore
Marine
Pharmaceutical
Paint spray shops
Grain storage
Paper mills
Lamp options & ‘T’ ratings
Specification & options
Specification
Fuel storage facilities
Water treatment plants
Metal treatment plants
Details
Certification Code (Gas)
Ex de IIB Gb T4 or T3
Certification Code (Dust)
Lamp Type / E40 Lamp
holder in all cases
Ex tb IIIC Db
Protection type
Group II Category 2 GD
Certification standards
EN 60079, EN 61241, IEC 60079, IEC 61241
500W Tungsten (110-127V,
AC or DC)
T3@Ta=55⁰C
500W Tungsten (220-250V
AC or DC)
Ex de (flameproof, increased safety)
ATEX / IECEx type class
Certificate(s)
8 Series ‘T’ rating
All certified Ex de IIB (gas) and Ex tb IIIC
(dust)
T3@Ta=50⁰C
250W SON (110V 50Hz)
T4@Ta=40⁰C
250W SON (127V 60Hz)
T4@Ta=40⁰C
SIRA01ATEX1035, IEC Ex SIR09.0030
Suitable zoned areas
Zone 1 and Zone 2, Zone 21 and Zone 22
Gas group suitability
IIA and IIB
-20⁰C to 55⁰C - see lamp types
250W SON/MBI (up to)
(210-250V 50Hz)
T3@Ta=55⁰C
Ambient range (max)
Marine grade corrosion resistant aluminium
body and covers with tough Borosilicate glass
250W SON/MBI (up to)
(220-277V 60Hz)
T3@Ta=55⁰C
400W SON/MBI (210-250V
50Hz)
T3@Ta=40⁰C
400W SON/MBI (220-277V
60Hz)
T3@Ta=40⁰C
250W HPMV (up to) (210250V 50Hz)
T3@Ta=55⁰C
250W HPMV (up to) (220277V 60Hz)
T3@Ta=55⁰C
400W HPMV (210-250V
50Hz)
T3@Ta=40⁰C
400W HPMV (220-277V
60Hz)
T3@Ta=40⁰C
Material
Ingress protection (IP rating)
Cable Entries
Electrical connections
Control Gear
Supply voltage
Installation / Mounting
Re-lamp access
IP66
2 x M20—ISO (1 plugged) as standard.
Other threads available.
2
2 wire and earth. Cable size 6mm max
with looping facility
Integral within the luminaire with power correction where fitted
110-270V 50/60 Hz see lamp options
Direct to rear of body, optional graduated
angle bracket, or optional pole mount kit
Via threaded lamp cover
Weight
29kg to 31 kg depending on lamp type
Options
Details
Ballast
Available as spares for models where fitted
Stirrup mount bracket
For accurate angled mounting (Option SM)
Pole mount kit
Easy lamp access
Beam adjustment
Adjustable bracket
option
Sturdy pole mounting bracket kit (Option PM)
www.petrel-ex.co.uk
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.cablejoints.co.uk
www.thorneanderrick.co.uk

2. Ordering and fixing options
How to select your product for ordering
Example: An 8 Series 400W SON with angle mount bracket for use in the UK
Model / Lamp type / Mains voltage / Mains frequency / Options
8
400WSON
240
50Hz
SM
Product code required is:
8/ 400WSON / 240 / 50 / SM
Photometric data available contact for details
Fixing & Dimensions
Pole mount bracket available
Shown with optional angle mount bracket,
all dimensions in mm
Also available from Petrel
Zone 1 Wellglass
Zone 2 Floodlight
Zone 2 Fluorescent
Industrial Bulkhead
Representation worldwide
Hazardous area control equipment
www.petrel-ex.co.uk
A Chamberlin plc company
Tel: +44 (0)191 490 1547
Petrel Limited
477 5371
Fax: +44 (0)191 Birmingham, B33 0LB United Kingdom
22 Fortnum Close, Kitts Green,
Email: northernsales@thorneandderrick.co.uk
T +44 (0)121 783 7161 • F +44 (0)121 783 5717
• E sales@petrel-ex.co.uk • W www.petrel-ex.co.uk
Website: www.cablejoints.co.uk
Registered No. 1539429 England
www.thorneanderrick.co.uk
Registered Office: Chuckery Road, Walsall WS1 2DU • VAT No. GB 695 8648 58