1. 2-291-1/5
Dynamic Host Configuration Protocol (DHCP)
Chuẩn bị:
- Trước khi thực hiện bài Lab này, phải cấu hình RIP cho PC03 và PC02 (tham khảo bài lab
Routing)
I. Cài đặt và cấu hình DHCP Server trên Router1:
- Tại máy Router1: logon Adminsitrator Start Settings Control Panel Add or
Remove Programs Add/Remove Windows Componens Tại cửa sổ Windows
Components, kéo thanh trượt chọn mục Networking Services Details…
- Tại cửa sổ Networking Services, đánh dấu chọn vào ô Dynamic Host Configuration Protocol
(DHCP) OK (hệ thống sẽ bắt đầu cài DHCP, nếu gặp thông báo yêu cầu đĩa CD Windows
Server 2003 thì vào thư mục I386)
- Tại cửa sổ Completing the Windows Components Wizard, click Finish
Chú ý: nếu hệ thống là Domain thì tại bước này phải Authorized DHCP vào database của
Active Directory
- Từ menu Start Programs Administrative Tools DHCP trong cửa sổ DHCP
right click phải PC02 New Scope…
- Trong cửa sổ Welcome to the New Scope Wizard, click Next
- Trong cửa sổ Scope Name gõ “Scope1” vào ô Name Next
- Trong cửa sổ IP Address Range nhập vào các thông số như sau:
Start IP address: 172.16.0.10
End IP address: 172.16.0.100
Length: 16
Subnet mask: 255.255.0.0 Next
- Trong cửa sổ Add Exclusions Next
- Trong cửa sổ Lease Duration, để nguyên giá trị mặc định Next
2. 2-291-2/5
- Trong cửa sổ Configure DHCP Options đánh dấu chọn vào ô No, I will configure
these options later Next
- Trong cửa sổ Completing the New Scope Wizard, click Finish
- Right click trên Scope1 (Scope được tạo ở trên) chọn Activate
- Right click trên Scope Options chọn Configure Options…
- Trong cửa sổ Scope Options tab General đánh dấu chọn vào ô 003 Router
trong ô IP address gõ 172.16.0.2 Add OK
- Kiểm tra trong Scope Options đã có 003 Router
- Trong cửa sổ DHCP right click chuột trên PC02 New Scope… trong cửa sổ Scope
Name gõ “Scope2” vào ô Name Next
- Trong cửa sổ IP Address Range nhập vào các thông số như sau:
Start Ip address: 10.0.0.100
End IP address: 10.0.0.150
Length: 8
Subnet mask: 255.0.0.0
Next
- Trong cửa sổ Add Exclusions Next
- Trong cửa sổ Lease Duration để nguyên giá trị mặc định Next
- Trong cửa sổ Configure DHCP Options đánh dấu chọn vào ô No, I will configure
these options later Next Finish
- Right click chuột phải trên Scope2 (Scope được tạo ở trên) chọn Activate
- Right click chuột trên Scope Options chọn Configure Options…. trong cửa sổ
Scope Options tab General đánh dấu chọn vào ô 033 Router trong ô IP address
gõ 10.0.0.3 Add OK
3. 2-291-3/5
kiểm tra trong Scope Options đã có 003 Router
- Right click chuột trên Server Options chọn Configure Options….
- Trong cửa sổ Server Options tab General đánh dấu chọn vào ô 006 DNS Servers
trong ô IP address gõ 210.245.31.130 Add OK
Cấu hình DHCP client trên PC01:
Tại máy PC01: Log on Administrator mở Properties card Cross mở properties
Internet Protocol (TCP/IP) đánh dấu chọn vào 2 ô:
+ Obtain an IP address automatically
+ Obtain DNS server address automatically
OK OK
- Vào Command line gõ ipconfig /release
- Trong Command line gõ ipconfig /renew
- Trong Command line gõ ipconfig /all
Lưu ý: sau khi gõ lệnh này DHCP Server sẽ cấp cho PC01 những giá trị sau:
IP Address: 172.16.0.10
Subnet Mask: 255.255.0.0
Default Gateway: 172.16.0.2
DHCP Server: 172.16.0.2
DNS Server: 210.245.31.130