Katalog trotec-thermal-anemometer-tridinamika, jual thermal anemometer trotec, beli, info, harga, spesifikasi dan review
Dapatkan informasi lengkap tentang produk trotec di
www.tridinamika.com
untuk informasi dan pemesanan hubungi
sales@tridinamika.com
1. Phone +49 2452 962-400
Fax +49 2452 962-200
info@trotec.com
www.trotec.com
30
TRT-KAT-THAN-WM-01-EN
BENEFITS IN PRACTICE:
Display of up to three measured
values simultaneously
Slimline telescopic probe –
straight or flexible – enables
measurement even in tricky-to-
access places (TA Series)
Determination of current, average,
minimum and maximum value
Automatic
temperature compensation
Supplied with calibration
certificate (TA Series)
Logging function (TA Series)
LogDAT2™-software (TA Series)
The T2000 E is a high-precision
digital multi-functional measuring
instrument from the MultiMeasure
Series to which the widest variety
of SDI and Pt100 sensors can be
connected.
In combination with the TS 460 SDI ane-
mometer sensor, the T2000 E anemome-
ter measuring case provides you with
a precision measuring instrument for de-
termining air flow velocity and air tem-
perature, for example, for the detection
and evaluation of insufficient or faulty
thermal insulation or for checking air
flow and temperature distribution in ven-
tilation and air conditioning systems.
More then “just” an
anemometer…
Besides theTS 460 SDI for measuring air
flow, additional sensors can be connect-
ed to the T2000 E’s serial digital inter-
face for determining temperature and
relative humidity,and for destruction-free
humidity measurement.TheT2000 E also
possesses an input for a Pt100 sensor
for temperature measurement.
Air flow measurement and much more – with just one measuring instrument…
Instead of many measuring instru-
ments for individual tasks, you only
need one measuring instrument for
many tasks: the T2000 E.
By simply changing the sensor, you can
convert your anemometer into, for ex-
ample, a thermal hygrome-
ter, a capacitive material
humidity measuring instru-
ment, a surface tempera-
ture thermometer or a mi-
crowave deep humidity
sensor.The T2000 E recog-
nises the newly connected sensor auto-
matically. If need be, you can extend the
range of applications of your T2000 E
by simply purchasing additional inex-
pensive sensors!
For further information
on the T2000 E and the available
sensors, please read from page 42.
Flexibility is the key:
The TS 460 SDI anemometer sensor
is used either with one hand or can
even be slotted into to the T2000.
Thermal anemometer
TA 430 and TA 440 –
precision anemometers with
practical characteristics
and functions:
• exact measurement of air flow velocity,
air temperature and volumetric flow
• additional measurement of humidity and
dew point (TA 440)
• simultaneous display of up to three measured values
• also available with flexible probe
• large data memory for recording measured values
• USB interface for fast data transfer to PC
• includes LogDat2™ software
Numerous possible applications:
• checking heating, ventilation and air conditioning systems
• commissioning
• maintenance tasks
• measurement of air flow velocity and temperature
at air apertures and ventilation slots
• certification of critical environments
• duct measurements
2. TrotecTelemetryPlanningandsurveyTemperatureVelocityMoistureMulti-functionTracinganddetection
Opticalinspection
systems
Leakdetection
This catalogue is constantly updated, even between going to press. Download the latest version of these pages as individual brochures to your PC.
You will find the latest product information, operation manuals and much more in our download area at www.trotec.com.
VELOCITY
31
Practical telescopic probes with sturdy
sensors have made the thermal ane-
mometers from the TA Series the
user’s first choice for years, e.g. the
version with a flexible probe head for
locating and evaluating leaks in low-
energy and passive houses during
sealing checks.
Volumetric flow measurements can be
specified comfortably via the device
menu for round or angular air ducts
and by means of entering the cross-
sectional area of an air duct.
The measuring probe can be extended
to a length of over one metre by means
of the telescopic rod for measurements
in ducts and other remote places.
Up to three measurement parameters
can be shown simultaneously on the
backlit displays of both models.
Series of measured values can be
saved in the device and transmitted to
the PC for evaluation via the USB con-
nection using the LogDat2™software
included with the device.
The TA 440 convinces
with the widest variety
of measuring functions:
Besides the measurement
of air flow velocity, volu-
metric flow, air temperature,
relative humidity, dew point
or wet-bulb temperature,
this measuring instrument
additionally has a logging
function for the automatic
saving of data measured
at intervals.
TA 430 and TA 440 – thermal anemometers for simple, direct
reading of air flow velocity, volumetric flow, temperature and more…
Technical data TA 430 TA 440 T2000E-TS 460 SDI
Article no. 3.510.004.010 3.510.004.015 3.510.004.020 3.510.004.025 ZB9110215AX
Compatible probes
Straight
telescopic
Flexible
telescopic
Straight
telescopic
Flexible
telescopic
TS 460 SDI
anemometer sensor
Probe length 1,016 mm 320 mm
Diameter of probe tip / base 7 mm / 13 mm 12 mm / 12 mm
Length of probe cable 1,200 mm 1,150 mm
Length of probe angled piece – 162.6 mm – 162.6 mm –
Diameter of jointed piece – 95 mm – 95 mm –
Velocity
Measurement range 0 - 30 m/s 0 - 20 m/s
Accuracy ± 3 % of measured value or ± 0.015 m/s (whichever is greater) ± 0.2 m/s +3 % of measured value
Resolution 0.01 m/s 0.01 m/s
Volumetric flow Measurement range Depends on velocity and duct cross-sectional area –
Temperature
Measurement range -10 to +60 °C 0 to +50 °C
Accuracy ± 0.3 °C ±1 °C
Resolution 0.1 °C 0.1 °C
Relative humidity
Measurement range – 0 to 95 R.H. –
Accuracy – ± 3 % R.H. –
Resolution – 0.1 % R.H. –
Duct size Dimensions 1 to 635 cm in steps of 0.1 cm –
Wet-bulb
temperature
Measurement range – 5 to 60 °C –
Resolution – 0.1 °C –
Dew point
Measurement range – -15 to +49 °C –
Resolution – 0.1 °C –
Memory capacity 12,700+ measured values and 100 test IDs 1 measured value
Saving interval 1 second to 1 hour –
Measured value determination Average (with freely-selectable time constant), minimum, maximum, sum Average, minimum, maximum
Temperature range
Operation 5 to 45 °C (circuitry), -10 to +60 °C (probe) 0 °C to +50 °C
Storage -20 °C to +60 °C -20 °C to +60 °C
Dimensions 178 x 84 x 44 mm 150 x 87 x 35 mm
Weight with probe approx. 270 g (incl. batteries) approx. 460 g (incl. batteries)
Power supply 4 x AA 1.5 V or power adaptor 4 x AA 1.5 V **
Scope of supply
Measuring instrument with operating manual, probe,
calibration certificate, CD-ROM with LogDAT2™ software,
USB connection cable, transport case
T2000 E multi-functional measuring instru-
ment, TS 460 SDI anemometer sensor, TC 30
SDI connecting cable, MultiMeasure case
Accessories On enquiry All SDI and Pt100 sensors from the
T2000 range (for further information
please read from page 42)
* at 20 °C, 45% R.H.; **The TS 460 SDI anemometer sensor is supplied with power
via the T2000 E multi-functional measuring instrument