Contenu connexe Similaire à SUC Brasil 2012 : GeniE Recent Releases (20) Plus de João Henrique Volpini Mattos (18) SUC Brasil 2012 : GeniE Recent Releases1. 1
SesamTM
40 years of success
Continuing 40 years of success with Sesam – recent and upcoming
releases
Ole Jan Nekstad, Product Director Sesam
3 December 2012
2. Sesam – serving the industry for 40+ years
You are part of a winning team
By investing in Sesam you invest in your own
toolkit for sea keeping and strength assessment
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 2
3. The Sesam 2011 DVD - August 2011
DNV Software releases new versions of the
Sesam product lines DeepC, GeniE and HydroD
The new versions of DeepC, GeniE and HydroD
focus on providing more flexibility in performing
design analyses and on giving our users more
advanced analysis options to fine-tune the design.
We have increased Sesam’s coverage to also
include design of umbilicals.
“The continuous investments in Sesam lead to new
and improved products that help our customers
become even more productive,” says Ole Jan
Nekstad, Product Director Sesam.
Hereby, we thank you for your continuous support
to Sesam. Your feedback is important to us. If you
have any suggestions, questions or problems
please send an email to:
software.support@dnv.com or contact our local
support.
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 3
4. Increased income means
more SW development
We have been busy since then
Sesam GeniE Sesam Wind
- V6.0 – December 2011 - V2.0 – May 2012
- V6.1 – March 2012
Sesam DeepC
- V6.2 – April 2012
- V4.6 – April 2012
- V6.3-02 – June 2012
- V6.3-06 – October 2012 Simo
- V3.6 – January 2012
Framework
- V3.7-01 – November 2012 Wadam
- V8.3 – March 2012
Sestra
- V8.4 – September 2011 Xtract
- V8.5 – October 2012 - V3.1 – October 2012
Wajac Sesam Pipeline tools
- V6.2 – April 2012 - FatFree V10.7, StableLines V1.3, PET V3.1,
OS-F101 V3.1 – December 2012
Usfos
- V8.6 – June 2012 UmbiliCad & Helica
- UmbiliCad V1.1 & Helica V2.3 – October 2011
Patran-Pre
- Helica V2.4 – July 2012
- V2010.2 – October 2011
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 4
5. Released
December 2011
GeniE v6.0 – Benefits
Full support of 64 bit technology will give our users access to
“unlimited amount” of memory. This will in particular help out
when modelling very large models, but also during code checking
of models with a significant high number of load cases.
Furthermore, it can import additional Sacs data and the code
checking has been made even more flexible for the ISO standard.
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 5
6. Sesam GeniE – now a 64 bit application
32 and 64 bit applications – “unlimited access to data memory”
- Much easier to model and analyse large models with 64bit
- The model below was successfully made in 32bit – easier now
- 165.000 beams, 200.000 shells, 1.000.000 dof, 41 LC
A typical Sevan FPSO
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 6
7. Much more complete import of Sacs data
Load combinations
Handling line loads on segmented members with more than 3 segments
Better warnings during import of Sacs data
Large number of
1000+ load
members and
combinations
plates
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 7
8. GeniE v6.1 – Main benefits Released
March 2012
Our users can now maintain and control the finite element
numbering of beam models. This also applies to imported models
from FEM or Sacs format.
The manual labour to redefine wave load data for imported models
is no longer needed as GeniE can import wave load date from older
Sesam format and Sacs.
GeniE can now include tension or compression elements in linear
analysis to the benefit of e.g. lifting or jack-up analysis. Ask us for
a utility tool to run Sestra tension/compression analysis.
Beams in X-joints can be fully disconnected. This leads to a sound
non-linear analysis model as well as improved tension/compression
analysis.
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 9
9. Import wave load data
Importing all hydrodynamic properties and wave load data from Wajac or by Sacs
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 10
10. Tension/Compression (T/C) analysis
Example uniform upwards load
- You need a utility tool from us to run T/C analysis
- Sestra v8.5 or later needed
Compression elements
not contributing to stiffness
No axial stress
Tension elements
contributing to stiffness Compression/tension (truss)
Positive SIGXX elements contributing to
stiffness
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 12
11. Tension/Compression (T/C) analysis
Verified against Abaqus, Usfos and
theoretical calculations
Iterative process using Sestra for each
step- convergence quickly achieved
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 13
12. Released
April 2012
GeniE v6.2 – Main benefits
A major upgrade of all beam code check standards reflecting the
latest code check revisions as well as providing more user control
in the use of code check formulas
A more robust data import from Sacs with respect to point and line
loads on members with very large eccentricities
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 15
13. Supported code check standards
Eurocode 1993-1-1 includes
corrigenda
- NS-EN 1993-1-1:2005/AC:2009
- NS-EN 1993-1-:2005/NA:2008/AC:2010
API WSD 2005 includes
- Error/misprint corrections in Errata 3,
January 2007 (joint capacity check)
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 16
14. Joint checks updates (all codes)
Azimuthal angle tolerance
- The user can now define azimuthal tolerance angle for joint
design. This provides the possibility to define different sets of
braces to be used on Joint Punch Check Analysis
- Previous GeniE versions used 5 degrees as default value
Define Brace - Can End distance
- Define Brace - Can End distance in opposition to the only
method used before (min distance).
- This option gives the individual brace - can end distance for
the joint punch analysis.
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 19
15. Cone checks updates (all codes)
GeniE allows users to choose between internal forces
on cone structures or adjacent forces on tubulars
close to transitions points for Cone Code Check
Analysis
GeniE has two ways of retrieve axial forces for cone
code checks.
- Default behaviour: Conical internal forces - the internal
axial forces are retrieved
- User option: External forces - in this case the forces at the
transitions are retrieved
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 20
16. Released
June 2012
GeniE v6.3 – Main benefits
New guiding geometry allowing for import of lines from DXF and
Rhino.
Beam code check data part of XML file storage leading to a more
complete data backup, re-use of data and upward compatibility.
Import of models from StaadPro.
Concept information imported from Sacs.
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 21
17. Moving to NURBS technology
More precise modelling leading to models with as few surfaces as possible
- Will lead to better control of the mesh
To be able to import lines from DXF and Rhino
- Same basics for modelling as CAD systems
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 22
18. New guiding geometry
Points, lines, polylines and more advanced curves
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 24
19. Beam code check part of XML
Export to XML after analysis and code check Re-establish the model based on XML
- Import the XML file
- Run analysis
- Run code check
- Present results
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 25
20. Import of model data from StaadPro
Supports beams, plates, loads and boundary conditions
- Separate module that will create a js-file for import to Sesam GeniE
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 26
21. Improved Sacs import
Read segment data and ensure that Concentric sections converted to
segment parts lie on a straight line overlapping beams
- Less manual work to re-establish model - Grout is handled
- Less work to define code check data as extra mass on
inner leg
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 27
22. Released
October 2012
GeniE v6.3-06 – Main benefits
Allow users to use DirectX 9 (DX9) to render graphics as an
alternative to OpenGL
DX9 may be option
- on devices that don’t support OpenGL (e.g. Intel HD cards)
- if GeniE graphics is unsatisfactory or giving poor performance on
your graphics card
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 28
23. Better options for graphic rendering
Support of OpenGL is the default option You can select to use DirectX 9 (DX9)
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 29
24. Released
November 2012
Framework v3.7-01 – Main
benefits
For the benefit of earthquake analysis and life extension analysis of
jackets, Framework now supports
- API RP2A-WSD, Oct. 2007, tubular joint check
- AISC 360-10, June 2010, member check
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 30
25. Updated code check standards
Most beam code checks are done in Sesam GeniE
For earthquake analysis and life extension analysis of very old models Framework
may be used
ISO 19902 will come in next version
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 31
26. Released
June 2012
Usfos v8.6 – Main benefits
More strict checking of the finite element model to ensure that the
model is fit for use in non-linear analysis.
There are new program defaults and accuracy parameters that will
help the user during analysis and joint capacity checking
In addition several enhancements in the user interface for graphical
verification of the model as well as easier hydrodynamic.
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 33
27. Stricter data check of the imported model
Element length vs. diameter
- Very short elements could cause unnecessary numerical
problems
- If L/D < 0.5 Usfos will stop and report this as an illegal short
element
Eccentricity vs. element length
- Source for numerical inaccuracies when extreme eccentricities
- If (e1+e2)/L < 0.5 Usfos will stop and report this as an illegal big
eccentricity
Soil thickness vs. pile diameter
- In a normal pile-soil model, the soil thickness is typically 3-10
times the pile diameter
- If Thick/D <1.0 Usfos will report this as an illegal thin soil layer
You may over-rule these data checks
- In most cases not recommended
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 34
28. Examples on better graphic verification
External pressure (now automatically Pile/soil – in this case viewing the T_Z curve
computed)
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 35
29. Released
May 2012
Sesam for Offshore Wind
Release September 2011: Supporting structural design according to
the IEC61400-3/DNV-OS-J101 standard:
- Fatigue calculations by combined time series simulation of wind
and wave loads
- Code check according to ISO, NORSOK, Eurocode and
API/AISC
Release May 2012: Pile/soil analysis is included in the analysis
process
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 36
30. September 2011: Jacket, tripod and mono-pile
1. Modelling and wave load 2. Wind turbine design 3. Substructure and
calculation analysis (HAWC, foundation analysis
Sesam GeniE FLEX, GL Bladed…) - FLS Sesam Wind
- ULS Sesam GeniE
Properties Load time
Loads series
Load calculations
Eigenvalue analysis
Pile-soil analysis Wind turbine design Substructure design
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 37
31. May 2012: Pile/soil included
Non-linear pile/soil analysis part of the Sesam Wind offering
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 38
32. Sesam Wind
Introducing Sesam Wind in “The Cloud”
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 39
33. Sesam Wind
A realistic use case
A wind turbine on a jacket support structure
- Loads from the rotor blades
(sample 10 minutes a 0.5 sec -> 1200 steps)
- Wave loads
- Soil analysis
- 1500 load condition (wind, wave,..)
- 1,5 - 2 million time steps
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 40
34. Start in Sesam Wind in The Cloud
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 41
35. Sesam Wind
Utilizing 1000 compute nodes
in the cloud gives the response
you require
Analysis results in 90 minutes!
Analysis results in125 hours!
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 42
36. Released
April 2012
Sesam DeepC v4.6 – Main
benefits
Air gap calculations in time domain may lead to more accurate
results as compared with traditional frequency domain analysis
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 43
37. Air gap calculations in time domain
Time domain analysis includes current and wind
By using DeepC time domain air gap analysis, more accurate extremes could be
obtained
In some environment conditions (with wave period close to heave natural period),
traditional frequency prediction may lead to a under-estimated air gap result
Air gap time series
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 44
38. Released
UmbiliCad & Helica July 2012
October 2011: A new release of UmbiliCAD (version 1.1.32) with
- Wall thickness calculations
- Bill of Material
- Reel capacity calculation
October 2011 Helica: Developed functionality for
- Capacity curves and fatigue for cross sections
that include cables (i.e. higher order elements)
July 2012 Helica: Capacity curve calculation for sub elements
July 2012 UmbiliCAD: Export to DXF
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 45
39. UmbiliCAD - packaging
UmbiliCAD basic functions
- UmbiliCAD drawing
- Mass, submerged weight, submerged W/OD ratio
- Axial, bending and torsion stiffness
- Capacity curve according to ISO 13628-5
- Tension/torsion coupling
- Fluid database (to be customized by user)
- Material database (to be customized by user)
- UltraWT (DNV & ISO wall thickness calculation)
UmbiliCAD optional modules
(extensions to basic functionality)
- UltraBOM (Bill of Material)
- UltraReel (Reel capacity calculation)
- Export to DXF format
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 46
40. Released
October 2012
Xtract v3.1-02
Reports can now be made based on your own template including
pictures, 3D models and key result data from Xtract. In addition
own text can be included. This functionality is called the Xtract
Report Builder.
We invite customers to gain experience from this reporting tool.
Specify offset between static and first complex load case to ensure
a correct combination of T, L and G files.
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 47
41. Xtract v3.1-02
Capture situations in Xtract and make report – and automatic update report after
reanalysis
Xtract Report Builder
Xtract MS Word
Requires MS Office 2010
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 48
42. Xtract v3.1-02
How to capture scenes
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 49
43. What will we do in the time to
come?
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 50
44. Main market drivers
The jacket, modification and re-qualification market
Hydrostatics and dynamics in one tool
Advanced surface models
Marine operations
SURF
We have a passion to make
and sell even more software
2013 will continue to
be busy for us…
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 51
45. Sesam Manager – release plan
The new Sesam Manager
- Q4/2012 – soft launch replacing “old” Sesam Manager and Sesam Explorer
- Q1/2013 – the official first release
- Q2/2013 – import workflows from “old” Sesam Manager
- Thereafter focus import workflows from Sesam Explorer, concurrent usage and “Sesam in
the Cloud”
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 54
46. Sesam Wind (Q4/2012)
Interface to Fedem & Bladed
- Bladed: Automated data transfer of wind turbine loads to Sesam
Winds
- Fedem: Automated data transfer from Sesam Wind (un-coupled
analysis) to Fedem for coupled analysis
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 55
47. Sima for marine operations (Q4/2012)
Front end to Simo and Riflex
- In release process now – roll-out during Q4/2012 or Q1/2013
We believe this tool will
significantly ease and
improve the way
engineers do marine
operation analysis
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 56
48. HydroD (Q4/2012)
Dynamic pressure in compartments - Part of HydroD 4
- Wadam
- Load transfer
GLview Plugin not installed. Press here to install plugin GLview Plugin not installed. Press here to install plugin
New Old
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 57
49. Sesam HydroD next generation
We are working full speed to replace existing HydroD (the 4 series) with the 5 series
- First release Q2/2013: Hydrostatics and stability analysis
- Next release: Support for hydrodynamics frequency and time domain
- Third release: Statistical post-processing
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 58
50. Sesam HydroD next generation
New and improved features in first release (Q2/2013)
- Improved hydrostatic calculations
- More robust algorithms
- Inclusion of beams
- New reporting functionality
- Stability reports
- Analysis documentation
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 59
51. Sesam GeniE Q1/2013
Connections leg and inner pile
Import piles, soil and wishbone from Sacs
Code checking of piles to API formula 3.3.1-5
and 3.3.1-6
Tension & compression analysis inside Sesam
GeniE
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 60
52. Sesam GeniE (Q1/2013)
Equipment modelling for
dynamic/eigenvalue analysis
Eccentricities on top of vertical beam
New: Vertical
M beam and mass
M
1m
Compression Tension Compression
Vertical beams with Hinges at
reduced shear stiffness connection to deck
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 61
53. Sesam GeniE (Q1/2013)
Point connection management
- To define connection between outer and inner leg at user controlled positions – fixed (same
as linear dependency), free, spring
Inner leg
connected to
outer leg at this
position only
Outer leg
connected to all
incoming braces
and the joint
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 62
54. Sesam GeniE (Q1/2013)
Controlling plate connections – from command line interface
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 63
55. Sesam GeniE (Q1/2013)
Disconnected stiffeners and plates
Full connection
Max SIGXX = 4391
Disconnected secondary stiffeners
Max SIGXX = 1218
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 64
56. Sesam GeniE (Q1/2013)
Some highlights on surface modelling
- Select all curves in one go and create surface
- Before: Select individual in one or two directions
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 65
57. Sesam GeniE (Q1/2013)
Shell/Plate Intersection with Plane as guiding curves
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 66
58. Sesam GeniE (Q1/2013)
Plate/Shell Edges as guiding curves
- Simply click on the surface of a Plate/Shell
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 67
59. Sesam GeniE (Q1/2013)
Circular fillet
- A new stable algorithm for creating circular arcs between linear segments of splines
- The old algorithms still run, but only in the java-script interpreter
Circular arc between a
line and the linear
segment of a shape-
preserving spline
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 68
60. Sesam GeniE (Q1/2013)
Split operation
A cubic-spline interpolates the nodes with
“Equidistant” parameterization
We split the curve at:
local parameter 0.5 at length fraction 0.5
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 69
61. Sesam GeniE (Q1/2013)
Getting General Information of a curve
- For the advanced user….
- print(<Curve>.GetCurveInformation());
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 70
62. Sesam GeniE (Q1/2013)
Getting Detailed Information of a curve
- For the advanced user….
- print(<Curve>.GeometryToString());
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 71
63. Sesam GeniE (Q1/2013)
Other useful evaluation functions
- For the advanced user….
- point = <Curve>.EvaluateAtParameter(…parameter…);
- double = <Curve>.GetParameter(…point on the curve…);
- point = <Curve>.EvaluateAtLocalParameter(… double in [0,1]…);
- double = <Curve>.GetLocalParameter(…point on the curve…);
- point = <Curve>.EvaluateAtLengthFraction(… double in [0,1]…);
- Tangent vector: vector = <Curve>.TangentVector(…point on the curve…)
- Curvature radius: radius = <Curve>.CurvatureRadius(…point on the curve…)
- Curvature vector: vector = <Curve>.CurvatureVector(…point on the curve…)
- <Curve> = Curve.VectorCurvatureFunction(…no points…,
…scale factor…);
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 72
64. Curves from GeniE to Rhino 4.0
Q3/2013*
Q3/2013*
* Working, but needs testing
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 73
65. Sesam GeniE (Q3/2013)
Quicker to make commonly used surfaces
- Much less need for defining guide lines prior to surface creation
- Implemented in Sesam GeniE, but needs more testing
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 74
66. The Sesam 2013 DVD
1 April, 2013 ?
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 75
67. You are our innovation!
Please continue to tell us.
By this we continue to be a
winning team.
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 76
69. 200 customers – a reference case
Integrated hull/deck analysis
- Super-element analysis
- Utilizing resources in Houston and South Korea
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 78
70. Safeguarding life, property
and the environment
www.dnv.com
SesamTM
3 December 2012
© Det Norske Veritas AS. All rights reserved. 79