Xexun gps vehicle tracker xt008 from Shenzhen Xexun Technology Co.,Ltd，what about its Applications,Product Features and Product Spec.

1. GPS VEHICLE TRACKER
USER MANUAL-XT008
U
Preface
Thank you for purchasing GPS Vehicle Tracker. This manual shows how to operate the device
smoothly and correctly. Make sure to read this manual carefully before using this product. Please note
that specification and information are subject to changes without prior notice in this manual. Any
change will be integrated in the latest release. The manufacturer assumes no responsibility for any
errors or omissions in this document.
1

2. Content
1
Summary
----------------------------------------------------------------------------------
2
Application
3
3
---------------------------------------------------------------------------------
3
Hardware description
3.1
Wires connection ----------------------------------------------------------------------------
3.2
3.3
Interior ------------------------------------------------------------------------------------- ------Relays connection -------------------------------------------------------------------------------
3
5
5
4
Specifications
----------------------------------------------------------------------------------------
5
Battery and SIM card installation ------------------------------------------------------------------
6
6
Startup
------------------------------------------------------------------------------------- -----------
7
7
Usage
--------------------------------------------------------------------------------------------------- --
7
8
Fortifying mode --------------------------------------------------------------------------------- --------8.1 Engine started alert
6
8
---------------------------------------------- --------- --------
8
8.2 Movement alert --------------------------------------------------------- --------- --------
8
8.3 Power cutoff alert --------------------------------------------------------- --------- --------
8
8.4 ENGINE-OFF Remotely function ---------------------------------------------- --------- --------
8
8.5 Increase relays function --------------------------------------------------- --------- -------8.6 More function with using the relays
8.7 Checking the working status
9 Tracking mode
8
----------------------------------------- --------- ------- 9
---------------------------------- --------- --------
9
-------------------------- --------- -------- -------
9.1
Initialization ---------------------------------- --------- -------
9.2
Change the Password
9.3
Authorization
9.4
Auto Track
9.5
Geo-fence
9
9.6. Tlimit Function
9.7
Movement alert
9.8
Overspeed alert
9.9
---------------------------------- --------- ---------------------------------------- --------- ------
9
10
10
---------------------------------- --------- ------11
---------------------------------- --------- ---------------------------------------- --------- ---------------------------------------- --------- --------
IMEI checking
---------------------------------- --------- ------------------------------------- --------- --------
9.10 Time zone setting -----------------------------------------------------------------
12
12
13
14
15
15
9.11 SOS
--------------------------------- --------- --------
9.12 SMS LINK
8.13 SMS ONE
--------------------------------- --------- --------------------------------------16
----------------------------------------------------------------------------16
2
15

3. 9.14 Low battery alert
9.15 SMS center
--------------------------- --------- ------------------------------------ --------- --------
9.16 GSM ID
--------------------------- --------- -------
9.17 Motion Sensor
9.18 SD Card
---------------------------- --------- --------
function
------------------------------ --------- --------
9.19 SIM conversion from A to B
------------------------------ --------- --------
10
Monitoring and Talking Mode
------------------------------ --------- --------
11
GPRS setting
-------------------------------------------------------------------
12
MMS picture function
13
RFID
14
Cautions
15
Faults & Solutions
16
Cable connection diagram
function
------------------------------------------
16
16
16
17
17
17
17
18
19
---------------------------------------------------------------------
19
---------------------------------------------------------------------
19
---------------------------------------------------------------------
19
---------------------------------------------------------------
19
1 Summary
Working based on existing GSM/GPRS network and GPS satellites, this product can locate and
monitor any remote targets by SMS or GPRS,and guard against theft of Vehicle.
2 Applications

Rental vehicle / Fleet management etc

Covert Tracking
3 Hardware Description
3.1 Wires Connection
3

4. SIM B Card slot
Connect GSM
antenna
For upgrade the
firmware
Connect GPS
antenna
DC +9-36V
Working status indicator
E
F G H
1 3
GPS indicator
2 4 6 8 10 12 14 16 18 20
A
B C D
5 7 9 11 13 15 17 19
GND
1 SP – Connects the round speaker (connection is ready ,only need connect the speaker)
2.SP + Connects the round speaker (connection is ready ,only need connect the speaker)
3. MIC + microphone +(connection is ready)
4. MIC + microphone -(connection is ready)
5. GND SOS GND (connection is ready)
6. SOS SOS +(connection is ready)
7. Oil test (analog input port )connects the black wire for the fuel sensor. Note: Please use our fuel
sensor only.
8. ACC (digital input port) connect the ACC (ignition)
9. V + connects relay, connction is ready,conencts the relay,it works.
10. Output (digital output) Connects the extra relays
11. Temperature test (analog input port) connects the middle connector of the round temperature
sensor.
12. Cut oil (digital output) connects the relay, connction is reay,conencts it,it works.
13. Out A (digital output) for the extra relay.
4

5. 14. Out B (digital output) Connection of RFID voice control
15. IO6 in (digital input port) connects the detective circuit of the switches for the doors and tail in the
car.
16. IO5 in(digital input port) connects the detective circuit of the switches for the doors and tail in the
car.
17. IO4 in (digital input port) connects the detective circuit of the switches for the doors and tail in the
car.
18. IO3 in (digital input port) connects the detective circuit of the switches for the doors and tail in the
car
19. IO2 in (digital input port) connects the detective circuit of the switches for the doors and tail in the
ca
20. IO1 in (digital input port) connects the detective circuit of the switches for the doors and tail in the
ca
Note: Two UART with the connectors of A.B C D; E F G H for 2 purposes.
A. Connect the extra camera
B. For input/output the data
Connects any conenctors ABCD or EFGH optionally, function actived.
UART1
(A.GND B.RX C. TX
D.+5V)
UART 2
(E.GND F.RX
G.TX
H.+5V)
3.2 Interior
Put SIM card here
A(back of Mainboard)
Put SD card here
3.3
Relays connection
Conencts the tracker
5

6. Relays
Connect oil routes
Connect oil routes
4 Specs
Content
Dimension.
Weight
Network
Band
GPS chip
GPS sensitivity
GPS accuracy
Specs.
8.2x8.2x2.8cm
195g
GSM/GPRS
GSM850/ 900/1800/1900Mhz
SIRF3 chip
-159dBm
5m
Reacquisition 0.1s
Cold status 45s
Warm status 35s
Hot status 1s
Time To First Fix
Power
9—36V
input
Battery
Standby
Storage Temp.
Operation Temp.
Chargeable changeable 3.7V 1100mAh Li-ion battery
50hous
-40°C to +85°C
-20°C to +55°C
Humidity
5%--95% non-condensing
5 Battery and SIM card installation
Make sure that there is no call transfer and call display is on, and PIN code off. The SMS message
must in Text format, can’t be identified for PDU format.
Steps:
1.Open the rear cover, insert a SIM card to the simcard slot A. (If using one simcard,do not insert it into
simcard slot A since the default simcard is simcard B)
2.Insert the SD card
3.Use a stick to pick up the simcard slot B,insert the simcard.
6
SIM card A
Use a stick to pick up the

7. Install SD card
Insert the simard slot
with the sim card
Put the SIM card into
the slot with the right
direction.
6 Startup

Put the SIM card and SD card in right places.(Put the B card slot in place,the indicator light will
blink quickly after 10 seconds, remove card slot B, tracker stops working)

Connect the power supply of the car (The red indicator inside the tracker is on when conencting
the 9-36 V power supply)

It takes 40-60 seconds to get the GPS and GSM signals and begins to work.The red indicator
blinks every 1 second,the blue GPS indicator blinks every 3 seconds.

Everything is ready when the blue GPS indicator blinks normally, then you can do the following
Settings.
7 Use
This product has four operating modes，Fortified, tracking, and the talking and
listening, and four models to switch to each other When after startup, default
7

8. state for tracking mode, you can send SMS fortify + password transferred to fortify
mode，Send monitor + password transferred to monitor mode, send talk + password
turned to call mode, send tracker + password turned back to tracking model type
7 Usage
The tracker has three working modes: Fortifying mode, Tracking mode and Monitoring mode.
Working modes can be changed reciprocally.
The default mode is Fortifying mode,sends command tracker+password,gets tracking mode,sends
minitor+passwords,get monitoring mode,sends fortify+password,goes back
fortifying mode
8 Fortifying Mode
Under the fortifying mode, call the tacker to arm or disarm the fortify function.When the forify
mdoe is armed,the indicator blinks every 4 seconds and if blinks every 1 second,means the fortify
is disarmed.(There is no cooridnates goes back for call when tracker works in fortifying mode)
When the fortify is armed,the alerts will be as below:
8.1 Engine Started illegally Alert
In fortifying mode, the tracker will start the ACC examine automatically. It will warn up the user when
the engine is started.
Alert SMS format: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F fortify
imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333
8.2 Movement Alert
This function is using for the owner to get an alert when the tracker moves out of a restricted district
(500m radius),
Response SMS format: lat: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0,
Signal:F moved imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333
8.3 Power Cutoff Alert
In this mode, the tracker will warn up the user automatically when the main power is cut off
unwontedly,such as if someone cut the wire connected the car with the device, it will alert “Battery with
8

9. coordinates”.
Alert SMS format: lat: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F
battery imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333
8.4 ENGINE-OFF Remotely function
( Remark:：You can send the below sms after the relay and the related wires conencted)
8.4.1 Send “powercar123456 11”， tracker disconnects the oil and electricity and cut the engine,car
stops slowly and you will get SMS powercar ok.
8.4.2 Send“powercar123456 00”，tracker connects the oil and electricity,the engine will be restore,you
will get SMS powercar ok.
8.5 More function with using the relays
Please send the below commands to control the extra relays.
relaya123456 0 control the OC output of wire A, 0 is the output low Voltage level ,1 is the output high
voltage level.
relayb123456 0 control the OC output of wire B, 0 is the output low Voltage level ,1 is the output high
voltage level.
Output123456 101 control the OC output of the output wire, 0 is the output low Voltage level ,1 is the
output high voltage level.(101 is the variety of the voltage of the relay,high-low-high,the interval is 1
second, it can be 010 also,means low-high-low, the inteval is 1 second as well, can be used for car
door open
8.6 External input detection function
Thre are 6 detective wires,if you need external input data or signals(such as the information of the
door and tail of the car)
15. IO6 in (digital input port) connects the detective circuit of the switches for the doors and tail
in the car.)
16 .IO5 in (digital input port) connects the detective circuit of the switches for the doors and
tail in the car)
17.IO4 in
(digital input port) connects the detective circuit of the switches for the doors and
tail in the car)
18.IO3 in
(digital input port) connects the detective circuit of the switches for the doors
and tail in the car)
19.IO2 in
(digital input port) connects the detective circuit of the switches for the doors
and tail in the car)
20.IO1 in
(digital input port) connects the detective circuit of the switches for the doors and
tail in the car)
SMS string is : lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F
Trigger6Start imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333
SMS alert string is: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F
Trigger6Stop imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333
Remark:：Trigger6Stop is low voltage level, Trigger6Start is high voltage level, 6 is item no. of IO IN,
informs you the origin of the alert.
9

10. 8.7 Checking the working status ( fortify or no fortify )
You can send SMS command “fortified123456” to tracker, it will report “ fortifying “ or “ no fortify “ to you.
Out of Fortifying mode SMS format: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47
F:3.87V,0, Signal:F no fortify imei:354776036842240 05 130.8 460 01 9523 29062,
Oil=100%,T=40,RFID=3333333
Fortifying mode SMS format: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0,
Signal:F fortify imei:354776036842240 05 130.8 460 01 9523 29062, Oil=100%,T=40,RFID=3333333
9 Tracking Mode
9.1 Initialization
Send SMS “begin+password” to the unit, it will reply “begin ok” and initialize all the settings. (default
password: 123456)
TO:13188888888
From:13188888888
begin123456
begin ok
9.2 Change the Password
Send SMS password+old password+space+new password to change the password. (default
password: 123456)
TO:13188888888
From:13188888888
password123456 888999
password ok
9.3 Authorization
9.3.1 Send SMS “admin+ password+ space+ cell phone number”to set
the first authorized number,
the other authorized numbers should be set by the first authorized number.
10

11. 9.3.2 Send SMS noadmin+password+space+authorized number to cancel the authorized number.
9.3.3 When an authorized number sends SMS or dials up the unit, it will reply a SMS as below:
Lat:
22.566901
long:
114.051258
speed:
0.00
14/08/09
06.54
F:3.85V,1,Signal:F
imei:354776031555474 05 43.5 460 01 2533 720B, Oil=80%,T=40,RFID=3333333
Lat: 22.566901 long: 114.051258== Coordinate
0.00
=== speed
14/08/09 06.54== Date&Time
F:3.85V
1 ==
Signal:F
== battery power
charging
0 means no charging
==== Full GPS signal
0 means weak GPS signal
354776031555474== IMEI
05=number of satellites ( from 3 to 10)
43.5=Altitude
460 = MCC
Mobile Country Code
01 == MNC
2533= LAC
Mobile Network Code
Location area code
720B= Cell ID
Oil=80%
T=40
RFID=3333333
油量值
温度值
当前用的 RFID 卡号
9.4 Auto-Track
This function is using for the user to receive SMS with Geo-info in a certain time.
9.4.1 Set up: Send SMS t030s005n+password to the unit, it will report the Geo-info at 30s intervals
11

12. for 5 times.It will reply as “t030s005n OK”
9.4.2 Send SMS t030s***n+password to the unit, it will reply SMS heaps of times. You will receive a
reply as “t030s***n OK”
9.4.3 Send notn+password to delete the “ auto track “.
TO:13188888888
Notn123456
9.5
From:13188888888
Notn ok
Tlimit Function
9.5.1 Send “tlimit123456 50” (50 is the restricted distance in meter, minimum is 1m, maximum is
6000m), tracker replies “tlimit ok” (note: this command should work along with auto tracking
command)
Once this function is set up, the tracker will only send coordinates if the moving distance is not less
than the restricted value in each interval, otherwise, it will not send new coordinates.
9.5.2 Send” tlimit123456 0 “ is to cancel this function, tracker replies ” tlimit ok”.
9.6 Geo-fence
Set up a geo-fence for the unit to restrict its movement within a district. The unit will send message to
the authorized numbers when it moves out of the district.
Notes: This function will be invalid if the unit moves outside the district. You need to re-set it if you
want this function again.
12

13. 9.6.1 Send SMS stockade+password+space+longitude,latitude; longitude,latitude to the unit to set
the restricted district.
Remark:The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the
second latitude&longitude is the coordinate of the bottom right corner.
TO:13188888888
From:13188888888
stockade123456
stockade ok
114.124845e,22.56718
5n;114.777888e,22.55
5666n
9.6.2 Send SMS nostockade+password to deactivate this function.
TO:13188888888
From:13188888888
nostockade123456
nostockade ok
This function will be invalid if the unit moves outside the district
Response SMS format: stockade!+geo-info. It will alarm one time in each setting.
From:13188888888
lat: 22.566923 long:
114.051331 speed: 0.00
28/11/10 03:33 F:4.32V,0,
Signal:F stockade
imei:359587011016261 05
41.5 460 01 2533 720B
Oil=80%,T=40,RFID=3333333
9.7 Movement Alert
13

14. This function is using for the owner to get alarm when the tracker moves out of a restricted district.
9.7.1 Set up: Send SMS move+password to the unit to set the movement alert. then the unit will reply
“move ok!” if the setting is successfully.
TO:13188888888
From:13188888888
move123456
move ok
9.7.2 Cancel:Send SMS nomove+password to deactivate this function
This function will be out of effect after the unit moves outside the district.
TO:13188888888
From:13188888888
nomove123456
nomove ok
This function will be invalid if the unit moves outside the district
Response SMS format: move!+geo-info. It will alarm one time in each setting.
From:13188888888
lat: 22.566923 long:
114.051331 speed: 0.00
28/11/10 03:33 F:4.32V,0,
Signal:F move
imei:359587011016261 05
41.5 460 01 2533 720B
Oil=80%,T=40,RFID=3333333
14

15. 9.8 Overspeed Alert:
This function is using for the owner to control the target’s speed.
9.8.1 Set up: Send SMS speed+password+space+080 to the unit,such as “speed123456 080”
TO:13188888888
From:13188888888
speed123456 080
speed ok
9.8.2 Cancel: Send SMS nospeed+password to the unit.
TO:13188888888
From:13188888888
nospeed123456
nospeed ok
Response SMS format: speed+080!+Geo-info (suppose the speed is 80km/h).
The tracker will check the speed in 1 minute interval and alarm if it is overspeed.
From:13188888888
lat: 22.566923 long:
114.051331 speed: 0.00
28/11/10 03:33 F:4.32V,0,
Signal:F speed
imei:359587011016261 05
41.5 460 01 2533 720B
Oil=80%,T=40,RFID=3333333
9.9 IMEI Checking:
Send SMS imei+password to the unit to check the IMEI number of the unit.
TO:13188888888
Imei123456
From:13188888888
15
imei35000112222222

16. 9.10 Time Zone setting
Send “time zone+password + GMT time ,reply “time zone ok”. (note: if GMT time is positive, just write
the number. If time zone is negative, have to write –1)
TO:13188888888
TO:13188888888
From:13188888888
Time zone23456 1
Time zone23456 -1
time zone ok
9.11 SOS Button
Press the SOS for 3 seconds, it will send “help me !+ Geo-info” to all the authorized numbers in 3
minutes.
Alarm SMS format:: lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0,
Signal:F help me imei:354776036842240 05 130.8 460 01 9523 29062, Oil=80%,T=40,RFID=3333333
9.12 SMS LINK
9.12.1
Send “smslinkone+password”, The tracker will reply a GOOGLE map link to admin number.The
position can be checked directly on smartphone(with GPRS enabled)
Format：http://maps.google.com/maps?f=q&hl=en&q=22.567610,114.051227&speed: 0.00 12/11/10
14:36 F:4.22V Signal:F imei:012207000691839
9.12.2
Send “smslink123456”, it will reply “smslink OK” . The tracker will send the following SMS format
always.
http://maps.google.com/maps?f=q&hl=en&q=22.567610,114.051227&speed: 0.00 12/11/10 14:36
F:4.22V Signal:F imei:012207000691839
9.12.3
Send “smstext123456”, it will reply “smstext OK”. The tracker will send normal SMS
16

17. 9.13 SMS ONE
Send “smsone+password”.The tracker will reply coordinates by SMS to admin number or by GPRS to
server
9.14 Low Battery Alert
When the backup battery is less than 3.7 V, it will send low battery alert to admin number
9.15 SMS Center ( or appointed number)
9.15.1 Setup: Send SMS adminsms+password+space+cell phone number to setup the SMS center.
The tracker will reply Geo-info & authorized number to sms center number
numbers call or send command to the tracker
even if the admin
9.15.2 Cancel: Send SMS noadminsms+password to cancel the SMS center.
Response SMS format: authorized number+Geo-info
9.16 GSM ID（this function can be add or delect for customization.）
GSM ID are in each sms or gprs data. The tracker can be found by GSM ID without gps signal. But the
customers have to ask their GSM operator for data base of the GSM ID.
9.17 Motion Sensor
This function is used to protect the vehicel or tracker when it is touched.
9.17.1 Setup: Send shake+password+space+1-10 to the tracker to set up this function.(1-10 means
the level of intensity)
9.17.2 Send SMS shake+password+space+1, 1 is the least sensitivity . Have to shake the tracker
strongly to get the alert.
9.17.3 Send SMS shake+password+space+10, 10 is the most sensitivity . Have to shake the tracker
slightly to get the alert
9.17.4 Cancel: Send SMS shake+password+space+0 to remove this function.
9.18 SD card function
A mini SD card can be put in the tracker’s SD card slot. The GPRS data can be saved in the SD card if
GPRS is disconnected. It will send data to the GPRS server again if GPRS is connected again.
9.18.1 Setup: Send SMS sdlog+password+space+1 to activate the sd card-saving function
17

18. Cancel: Send SMS sdlog+password+space+0 to the tracker to deactivate this function
9.18.2 Setup: Send SMS readsd+password+space+1 to ask the tracker to send data in the SD card
to the GPRS server.
Cancel: Send SMS readsd+password+space+0 to ask the tracker to stop sending data in the SD card
to the server.
9.19 SIM conversion from A to B
9.19.1 If you are using simcard B,sends a command selectsim123456 A,after 1 minute,simcard A
works,and Simcard B stops working.The same thing for after sending selectsim123456 B
9.19.2 When 2 simcards are working simultaneously.Simcard A loses the GSM signal,simcard B will
work automatically,the same thing for Simcard B.
9.19.3 Send selectsim123456 A, A card works permanently, send selectsim123456 B,B card works
permanently, send selectsim123456,will transform automatically between A card and B card
10 Monitor and Talking Mode
10.1 Send
then
you
SMS
monitor+password,
the
response from
the
tracker
is
“monitor
ok”
can hear the voice around the tracker after your call.
10.2 Send SMS talk+password,it will reply “talk ok”, if connects the round speaker,you can have 2
ways communication.
(Remark: Send “volume+password+60” to adjust the volume,60 is variable, the grades from
0-99,from low to high level,send volume123456 0 for listen in only.)
11 GPRS setting
APN(access point name), IP, PORT have to be set up for gprs function. Apn user, apn password have
to be set up also if there are. So please contact with the gsm operator for them
11.1
Set GPRS protocols
11.1.1 Set TCP protocols:Send SMS Gprsmode+password+space+0 to set up TCP protocol,
tracker will reply GPRSMODE ok。
(note: TCP is the default mode in the firmware)
11.1.2 Set UDP protocols:
Gprsmode+password+space+1 to set up UDP protocol, tracker will reply GPRSMODE ok。
11.2 Set IP address and port:
18

19. Setup: adminip+password+space+IP address+space+port.
If setup successfully, the tracker will reply SMS “adminip ok”
Cancel: Send SMS noadminip+123456
11.3 Set APN
Setup: Send SMS “APN+password+space+B card APN content+ space +A card APN content.”If setup
successful, the tracker will reply SMS “APN ok”. (Remark:if use B card only, then no need to set A
card APN content)
Cancel: The old APN will be invalid automatically when a new APN is set.
11.4 Set APN USER
Setup: Send “APNUSER+password+space+B card APN user content+ space +A card APN user
content”, the tracker will reply SMS”APNUSER OK”. (Remark:if use B card only, then no need to set
A card APN user content)
Cancel: The old APN user name will be invalid automatically when a new APN user name is set.
11.5 Set APN’s Password
Setup: Send “APNPASSWD+password+space+B card APN password content+ space +A card APN
password content”, the tracker will reply SMS”APNPASSWD OK”. (Remark:if use B card only, then no
need to set A card APN password content)
Cancel: The old APN password will be invalid automatically when a new APN password is set.
11.6 GPRS setting
The tracker will hang up the calling in gprs mode when an authorized number calls to the
tracker, then send gprs data to the server.
GPRS Format: serial number, the authorized number, GPRMC data, GPS signal( F is strong L is
weak), alarm information, imei , satellite number ,altitude,
battery power (F is full,L is weak), charging state( 1 charging ,0 no charging), byte number,
checksum, MCC, MNC,LAC, CELL ID Oil=80%油量值
T=40 温度值 RFID=3333333 RTID 卡号码
For example：
100312033421,13145826175,GPRMC,033421.851,A,2234.0209,N,11403.0733,E,1.87,347.73,12031
0,,,A*62,F,help me, imei:354776036842240,03,73.5,F:4.14V,0,138,46772,460,01,2533,720B
Oil=80%,T=40,RFID=3333333
12.MMS Camera settings
12.1 Positioning of the camera into the upper socket device.(Note: Use function locator take
pictures inside must be put a 1G SD card)
12.2 In the locator set authorization number, Authorized steps set the same as above 9.3.( Note:
Authorized number of mobile phone have MMS.)
19

20. 12.3 Set locator SIM card MMS settings：
Formats such as:MMSSET123456 cmwap 10.0.0.172 80 mmsc.monternet.com
（ Note ： CMWAP is APN
10.0.0.172 80 is IP and port
mmsc.monternet.com is
CENTER）
12.4
Automatic photos set instructions: mms123456 120 5
（Note： for time interval，
120
Minimum for 60, Unit is seconds，5 is taken to send the number of sheets，Such as shooting
countless 999）
12 MMS Photograph function setting
12.1 Connect the camera with the tracker (note: must insert a 1GB SD card to the tracker when
using the MMS photograph function)
12.2 Set authorization number for the tracker (note: authorization number phone should have MMS
function.)
12.3 Set the APN, APN user, APN password for the tracker
12.4 Format: MMSSET+password + Spaces + APN + Spaces + USER + Spaces + PASSWORD
12.5 Auto photographing: mms123456 120 5 (note: 120 means 120 seconds interval, minimum is 60
seconds, 5 means the number of picture)
13.RFID Function
13.1 RFID Reader wiring
13.1． The RFID locator line plug socket in the next row，
1
Socket on the positioning of a brown
thread receives the output line purple line，Faulty card didn't sound。Figure：
Brown received a
purple line thread
20

21. 13.1.2 Cord and plug connected to the correct post,RFID reader on a red light,Where you can charge。
13.2 RFID
Card reader use
13.2.1 RFID
Card reader reading card
On the RFID card into the reader, Reader will emit a long sonorant,To illustrate the card to be
read success, Then there is position in positioning information task in RFID = this card number,
If the boot did not read the card RFID = empty.
13.2.2 RFID Card authorized:
Send text messages:
rfidadd123456 11A156789
Format: rfidadd+ password + Space + Card number
Reply: rfidadd OK
(May authorize the card number 10)
Note: Authorized CARDS is a sound when long ring, That the success of credit card.
Unauthorized credit card number is three short beeps, That unsuccessful. And there is a warning
letter
.lat: 22.567908N long: 114.051395E speed: 0.00 05/01/11 04:47 F:3.87V,0, Signal:F
imei:354776036842240 05 130.8 460 01 9523 29062，Oil=80%,T=40,RFID=3333333
13.2.3 RFID
Delete card authorization:
Send text messages:
rfiddel123456 11A156789
Format: rfiddel + password + Space + Card number
13.2.4 RFID
Card authorized inquires
21
Reply: rfiddel OK
NoSec

22. Send text messages: rfidlist123456
Format: rfidlist + password
13.2.5 RFID
Reply: 11A156789 22356C88
Reply to the current authorized card number
Function switch
Send text message: rfid123456 1/0
(1 : Open function, 0: Off function) Reply: rfid OK
Forma: rfid + password + Space +1or 0
(Note: This function opens the relay is disconnected, At this time only brush RFID card relay will get through,
Now connected again after ACC shut and disconnect ACC relays, such as available again when the relay to
brush RFID card, Repeated this action convenience team management)
13.2.6 RFID
Switch function inquires
Send text message: rfidsec123456
Reply: rfid on/off
Forma: rfidsec + password
14
Cautions
Please comply with the instructions to extend the unit life:
1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
2. Don’t use & store the unit in dusty places.
3. Don’t put the unit in overheated or overcooled places.
4. Handle carefully. Don’t vibrate or shake it violently.
5. Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent.
6. Don’t paint the unit, this may cause some foreign materials left in between the parts.
7. Don’t disassemble or refit the unit.
8. Please use the battery and charger provided by manufacturer. Using other batteries and chargers
will cause unwanted situation.
9. Don’t dismount the antenna randomly, or use other antennas. This may interfere the transmission,
and increase the radiation as well.
15 Faults & Solutions
Faults
Startup Fail
Hangup Fail
Solution
Check the SIM and see if it is fully charged or
correctly installed.
Check if the unit received GPS signal or not,or if the SIM card there is
calling display or not.
22

23. Monitor Fail
Location report in
digits of zeros.
Check if the authorized number is setup or in the coverage
of signals.
Don’t use it in the place beyond reach of signals. Place the
unit outdoors, especially when starting it up.
(Remark: The times of alert returns by tracker can be customized ,it supports
GPRS commands and PC commands settings,the comamnds are the same as
sms comamnds )
16
Accessories diagram
16.1 . Fuel sensor diagram
Red wire connect s+DC9-36V
Blue wire connects GND
Black wire connects the tracker’s
Oil test wire
16.2 The temperature sensor diagram:
23

24. VO+connects the tracker’s
temperature test wire
VO-connects GND
VDD connect s+DC9-36V
GND connects GND
Temperature detecting stick, put to test temperature place
16．3 Camera Connection
24

25. Locate
this
connector
into
the
connector on the inside row 4PIN
16．4
RFID Connection
Connect this cable to
the output of the first
purple line
This connector into the locator
in the next row 4PIN connector
25

26. This is connected to the
next row of connectors
and RFID
Row on the joints
and this camera is
connected
More informations about GPS Tracker from the official website: http://www.gpstrackerchina.com/
26