The Arduino Uno is a microcontroller board based on the ATmega328 ."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. It has 14 digital input/output pins, 6 analog inputs, A 16 MHz ceramic resonator, A USB connection, A power jack, An ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. https://www.robomart.com/arduino-uno-online-india

1. ARDUINO MICROCONTROLLER
By
RM0058

2. INTRODUCTION OF ARDUINO ROBOTIC KIT
 The Arduino Uno is a microcontroller board based on the
ATmega328 ."Uno" means one in Italian and is named to mark the
upcoming release of Arduino 1.0.
 It has 14 digital input/output pins, 6 analog inputs, A16 MHz
ceramic resonator, A USB connection, A power jack, An ICSP
header and a reset button.
 It contains everything needed to support the microcontroller; simply
connect it to a computer with a USB cable or power it with a AC-to-
DC adapter or battery to get started.
 The Uno differs from all preceding boards in that it does not use the
FTDI USB-to-serial driver chip. Instead, it features the
Atmega16U2Atmega8U2 up to version R2) programmed as a USB-
to-serial converter.
 The Arduino UNO can be powered via the USB connection or with
an external power supply. The power source is selected
automatically.

3. PIN OUT OF ARDUINO UNO
RM0058

4. FEATURES OF ARDUINO ROBOTIC KIT
 Microcontroller : ATmega328
 Operating Voltage : 5V
 Input Voltage (recommended) : 7-12V
 Digital I/O Pins : 14 (of which 6 provide PWM output)
 Analog Input Pins : 6
 DC Current per I/O Pin : 40 mA
 DC Current for 3.3V Pin : 50 mA
 Flash Memory : 32 KB of which 0.5 KB used by boot loader
 SRAM : 2 KB
 EEPROM : 1 KB
 Clock Speed : 16 MHz

5. APPLICATIONS OF ARDUINO MICROCONTROLLER
 DIY project prototyping.
 Developing varied varieties of
projects that require a code
based control.
 Automation System
development.
 Learning AVR programming.
 Entry level circuit designing.
RM0058

6. CONTACT US
B5 C Block Sector 31, Above Indian Overseas Bank
Noida Uttar Pradesh 201301
India
Mob. +91-8744000555
Tel. +91-120- 4317229
Email ID admin@robomart.com
Web. https://www.robomart.com

7. Thank You