1. Name: Zubair Aslam s/o Muhammad Aslam
Address: Bisha, Saudi Arabia (Temporary)
Dist. Hafizabad, Province Punjab, Pakistan (Permanent)
Mobile: +966-599344246, +966542849378
E-mail: agogengineer@gmail.com
OBJECTIVE
PROFILE
HVAC
Seeking a thought-provoking and accountable career in the field of
mechanical systems by which I can develop my skills and be an asset
for my future employer.
I am B.Sc. Mechanical Engineer almost 3 Years’ experience as a site
Engineer for MEP works e.g. HVAC (Duct fabrication and installation +
chilled water piping), PLUMBING (Water supply, Gravity drainage, storm
water) & Firefighting Piping. My current project is a 4 star hotel. I joined
this project from the beginning and now it’s nearly finalized. Along this I
have completed two residential buildings, one large commercial offices’
building and one Mosque.
 My Skills & capability are not less than 5 years' experienced engineer.
EXPERTISE
 Possess knowledge of cooling and heating load calculations
for any type of building following ASHRAE standards by using
Carrier HAP 5.0.
 Ability to provide creative and practical design solutions to meet
the customer’s specifications.
 Familiar with ASHRAE air distribution standards.
 Familiar with SMACNA duct construction standards.
 Familiar with SMACNA duct installation standards.
 Familiar to design duct sizing by constant velocity method, equal
friction method.
 Able to design exhaust duct and exhaust duct fans.
Curriculum Vitae

2. PLUMBING
 Calculation of chilled water pipe sizes as per ASHRAE codes and
designing of chilled water supply and return piping layout and
selection of various accessories.
 Selection of chilled water FCU’s and AHU’s according to
specifications and site conditions.
 Pump head calculations and selection of chilled water pumps.
 Preparation and reviewing shop drawings and Material Submittal.
 Able to prepare BOQ, equipment schedule and specifications.
 Prepare quotations and present them in a simple manner.
 Knowledge of major HVAC Manufactures and the product brand
they possess.
 Excellent ability for plumbing design e.g. potable water supply,
Drainage, storm water as per UPC codes.
 Ability to calculate required hydraulic pressure and flow rate for
potable water supply pump and pump selection as per UPC
codes.
 Septic Tank and water supply Tank calculations as per UPC
codes.
 Drainage and water supply fixtures, sanitary fittings, water heaters
and material selection.
 Able to prepare plumbing BOQ, equipment schedule and
specifications.
 Prepare quotations and present them in a simple manner.
 Knowledge of major plumbing manufactures and the product
brand they possess.

3. FIREFIGHTING
CALCULATION
SKILLS
 Possess knowledge of Firefighting design as per NFPA CODES
e.g. hazard area identification, Sprinkler spacing, required flow
rate and pressure.
 Calculations and selection of Sprinkler type, Fire hose cabinet,
Landing valves and Zonal control valves.
 Calculation for firefighting pipe sizes.
 Hydraulic calculations (by ELITE) to determine required pump
pressure and selection of right pump for firefighting system.
 Calculations for firefighting storage tank.
 Familiar with NFPA13 installation standards for sprinklers.
 Strong technical expertise of piping, pipe supports, valves, fabrication,
erection, welding, inspection and hydro test.
 Able to prepare firefighting BOQ, equipment schedule and
specifications.
 Prepare quotations and present them in a simple manner.
 Knowledge of major firefighting manufactures and the product
brand they possess.
Possess excellent knowledge of calculations:
 Heat and cooling load calculation (Carrier HAP 5.0)
 ELITE Hydraulic calculation for Firefighting and water supply head.
 Exhaust Air calculation.
 Fresh Air calculation.
 Duct Size calculation.
 Chilled water head and pipe size calculation.
 Potable water supply pipe size calculation
 Pumps selection.

4. DRAWING
SKILLS
MANAGERIAL
SKILLS
PROFESSIONAL
SKILLS
 Comfortable with architectural and civil structure drawings.
 HVAC, Plumbing and Firefighting designing and shop drawings.
 Ducts, duct fittings, Plenum Box, diffuser box fabrication as per
shop drawing.
 Prepare as built drawings.
 Specialize in 2D AutoCAD.
 Comfortable with AutoCAD MEP and Revit MEP 3D drawings.
 Possess knowledge of MEP services co-ordination e.g. above
ceiling and risers services co-ordination and able to present 3D
design for critical areas.
 Ghabti Grand Hotel (4 star), consists 10 stories, I efficiently
managed the entire mechanical team with over 40 labors and
three foremen at Rouf National Contracting Company (RNCC),
Saudi Arabia
 Handle over 15 people at MAP Rice mills construction project for
plumbing and ducting. (SPARCO Construction Company,
Pakistan)
 Well managed PIEAS University Debating Society as being
President for 1.5 years and organized many events.
 Well managed PIEAS University Hiking club as a President for 1
year and arranged numerous tours.
 Task-oriented, organized and hardworking, Can work under
pressure and in a team, Punctual, Conscientious and Self-
motivated.
 Drive the best output of production, goals and efficiency.
 Indicates a moderate preference to work under the competent
leadership of others.
 Applying scientific / technical and logical things to identify,
analyses and solving problems.

5. CERTIFICATION
AND
MEMBERSHIP
PROFESSIONAL
EDUCTION
 Motivated to describe, explain, teach, illustrate and interpret.
 Team and leader with initiative and dynamic skills, and can adapt
with changing environment.
 Handle and accept guidance and advice, yet work under minimum
supervision.
 Talented at managing team members and developing high
performance groups.
 Official Member of International Association of Mechanical and
Plumbing Officials (IAMPO).
 Officially certified for Potable water supply pipe sizing as per UPC
codes by IAMPO.
 HVAC Certificate of attendance:
1. Speed control Methodology of different types of chiller technologies
2. Best in class design for superior direct expansion system
3. 360 Air conditioning technology
4. How to rightly deal with hygienic aspects of air Handling Unit
5. Precise measurements of operating conditions in modern ventilation and
air conditioning
6. Design for tomorrow, Innovative air cooled chillers
7. Future of refrigeration
BACHELOR OF SCIENCE (B.SC.) IN MECHANICAL
ENGINEERING
Duration: (2010-2014)
From: Pakistan Institute of Engineering and Applied
Sciences (PIEAS), Islamabad
(Ranked No. 1 Engineering University in Pakistan by HEC, Pakistan & QC
University Ranking 2014)
Major Subjects:
Design and Analysis
Refrigeration & air-conditioning
Heat & Mass Transfer
Fluid Dynamics
Thermodynamics

6. PROFESSIONAL
EXPERIENCE  RAUF NATIONAL CONTRACTING COMPANY (ELECTRO-
MECHANICAL), SAUDI ARABIA

Job Role: Site Engineer Mechanical
Project: Al-Khabti Grand Hotel (4-Star)
Location: Bisha, KSA (Asser Province)
Duration: From Jun, 2015 to Still
ASSIGNMENT:
 Engineering technical assistance in procurement, supervision in
construction and Installation of Duct, Installation & commissioning
HVAC system of 800 Tons capacity (4 chillers): 11 Air handling units,
296 Fan coil units, Ventilation fans & Stairs Pressurize Ducts and
Supervision of duct fabrication.
 Engineering technical assistance in procurement, site planning,
supervision in construction, commissioning and installation of all pipe
work e.g. sprinklers & firefighting system, Plumbing system (pressure
& Gravity), storm water and chilled water piping system.
 Coordination of MEP services in ceiling, corridors, and risers and
coordinate MEP drawings with architecture and building structure
drawings.
JOB DESCRIPTION:
 Review all Shop drawings for final installation and fabrication.
 Coordination of all MEP systems.
 Selection & deduction of material and prepare BOQ.
 Supervise duct fabrication and installation as per SMACNA CODES.
 Supervise Firefighting pipes fabrication and installation as per
NFPA CODES.
 Chilled water Pipe fabrication, insulation & installation.
 Supervise Plumbing pipe installation including water supply,
drainage & Storm water as per UPC CODES.
 Installation and commissioning of FCU's, AHU's & Chillers.
 Supervise Firefighting, swimming pool, water supply, sewerage
water, pumps installation and commissioning.
 Manage procurement on site.

7. PROFESSIONAL
EXPERIENCE
 SPARCO CONSTRUCTION COMPANY, PAKISTAN
Job Role: Site Supervisor Mechanical
Project: MAP Rice Mills Offices Construction
Location: Hafizabad , Pakistan
Duration: From 2014 to 2015
ASSIGNMENT:
 Engineering technical assistance in procurement, site planning,
supervision in construction, commissioning and installation of all pipe
work e.g. sprinklers & firefighting system, Plumbing system (pressure
& Gravity), storm water, Split AC Unit Installation.
 Coordination of MEP services in ceiling and corridors and coordinate
MEP drawings with architecture and civil structure drawings.
JOB DESCRIPTION:
 Review all Shop drawings for final installation and fabrication.
 Coordination of all MEP systems.
 Selection & deduction of material and prepare BOQ.
 Supervise Firefighting pipes fabrication and installation as per
NFPA CODES.
 Supervise copper piping for split AC unit Installation and installation
of indoor and outdoor units.
 Supervise Plumbing pipe installation including water supply,
sewerage, Drainage and Storm water.
 Supervise Firefighting piping, Sprinkler and Fire Hose cabinets
Installation
 Pumps installation and commissioning.
 Manage procurement on Site.

8. COMPUTER
SKILLS
PERSONAL
DATA
REFERENCES
 AUTOCAD 2D
Well Familiar with maximum commands.
 Revit MEP
Well familiar with 2D, 3D features and can make all type of
Mechanical Designs including assembly.
 Elite Fire Software
Complete understanding and can calculate Hydraulic calculation for
Fire Sprinkler System.
 Carrier HAP 5.0
Complete understanding of cooling load calculation and equipment
selection.
 Microsoft Office
Well aware with MS Word, Excel (Formula and charts) and Power
point (Presentation).
 Microsoft Project
Well familiar with Microsoft project planning and scheduling.
 Computer Maintenance
I have good knowledge of computer software and hardware.
 Date of Birth: 25 Dec, 1991.
 Marital status: Single.
 Nationality: Pakistani.
 Saudi Visa Status: Transferable
 Drive license: Saudi Arabia, Pakistan
Engineer Mohammed Youssef Mohammed Youssef
Project Manager at Rouf National Contracting Company RNCC
Mobile: 00966-547288376
Engineer Abdul Fateh
Senior Architect Engineer at Rouf National Contracting Company
RNCC
Mobile: 00966-550771961