diode,PIN DIODE ,WORKING ,,CONSTRUCTION,LAYERS,PHOTODIODE,

1. BY
ASHVANI KUMAR SHUKLA
M.E.(I&C)-2015
151503
PIN PHOTODIODE

2. Contents
 Introduction
 PIN Diode
 Construction
 Working
 Advantage and Disadvantage
 Application
 Research

3. Introduction
 A Pin photodiode is device that consumes light energy
to generate electric current. It is also sometimes
referred as photo-detector, photo-sensor, or light
detector.
 PIN Photodiodes are specially designed to operate in
reverse bias condition.
 PIN Photodiode is very sensitive to light so when light
or photons falls on the photodiode it easily converts
light into electric current. Solar cell is also known as
large area photodiode because it converts solar energy
or light energy into electric energy. However, solar cell
works only at bright light.

4. PIN DIODE
 The symbol of PIN photodiode is similar to the normal
p-n junction diode except that it contains arrows
striking the diode. The arrows striking the diode
represent light or photons.
PIN

5. Continue....
 The construction and working of PIN photodiode is
almost similar to the normal p-n junction diode. PIN
(p-type, intrinsic and n-type) structure is mostly used
for constructing the photodiode instead of p-n (p-type
and n-type) junction structure because PIN structure
provide fast response time. PIN photodiodes are
mostly used in high-speed applications.
 In a normal p-n junction diode, voltage is used as
the energy source to generate electric current whereas
in photodiodes, both voltage and light are used as
energy source to generate electric current.

6. CONSTRUCTION
 A PN junction photodiode is made of two layers namely p-
type and n-type semiconductor whereas PIN photodiode is
made of three layers namely p-type, n-type and intrinsic
semiconductor.
 In PIN photodiode, an addition layer called intrinsic
semiconductor is placed between the p-type and n-type
semiconductor to increase the minority carrier current.

7. Continue......
 P-type semiconductor
 If trivalent impurities are added to the intrinsic
semiconductor, a p-type semiconductor is formed. In p-type
semiconductors, the number of free electrons is lesser than
the number of holes Therefore, holes are the majority
charge carriers and free electrons are the minority charge
carriers. In p-type semiconductors, holes carry most of the
electric current.
 N-type semiconductor
 If pentavalent impurities are added to the intrinsic
semiconductor, an n-type semiconductor is formed. In n-
type semiconductors, the number of free electrons in the
conduction band is greater than the number of holes in the
valence band. Therefore, free electrons are the majority
charge carriers and holes are the minority charge carriers.
In n-type semiconductors, free electrons carry most of the
electric current.

8. Continue......
 Intrinsic semiconductor
 Intrinsic semiconductors are the pure form of
semiconductors. In intrinsic semiconductor, the
number of free electrons in conduction band is equal to
the number of holes in valance band. Therefore,
intrinsic semiconductor has no charge carriers to
conduct electric current.
 However, at room temperature a small number of
charge carriers are generated. These small number of
charge carriers will carry electric current.

9. Working
 A PIN photodiode is made of p region and n region
separated by a highly resistive intrinsic layer. The intrinsic
layer is placed between the p region and n region to
increase the width of depletion region.
 The p-type and n-type semiconductors are heavily doped.
Therefore, the p region and n region of the PIN photodiode
has large number of charge carriers to carry electric current.
However, these charge carriers will not carry electric
current under reverse bias condition.
 On the other hand, intrinsic semiconductor is an undoped
semiconductor material. Therefore, the intrinsic region does
not have charge carriers to conduct electric current.

10. Continue..........
 Under reverse bias condition, the majority charge
carriers in n region and p region moves away from the
junction. As a result, the width of depletion region
becomes very wide. Therefore, majority carriers will
not carry electric current under reverse bias condition.
 When light or photon energy is applied to the PIN
diode, most part of the energy is observed by the
intrinsic or depletion region because of the wide
depletion width. As a result, a large number of
electron-hole pairs are generated.

11. Continue..........
 Free electrons generated in the intrinsic region move
towards n-side whereas holes generated in the intrinsic
region move towards p-side. The free electrons and
holes moved from one region to another region carry
electric current.
 When free electrons and holes reach n region and p
region, they are attracted to towards the positive and
negative terminals of the battery.

12. Continue..........

13. Continue..........
 The population of minority carriers in PIN photodiode
is very large compared to the PN junction photodiode.
Therefore, PIN photodiode carry large minority carrier
current than PN junction photodiode.
 When forward bias voltage is applied to the PIN
photodiode, it behaves like a resistor.
 We know that capacitance is directly proportional to
the size of electrodes and inversely proportional to the
distance between electrodes. In PIN photodiode, the p
region and n region acts as electrodes and intrinsic
region acts as dielectric.

14. Continue..........
 The separation distance between p region and n region
in PIN photodiode is very large because of the wide
depletion width. Therefore, PIN photodiode has low
capacitance compared to the PN junction photodiode.
 In PIN photodiode, most of the electric current is
carried by the charge carriers generated in the
depletion region. The charge carriers generated in p
region or n region carry only a small electric current.
Therefore, increasing the width of depletion region
increases the minority carrier electric current.

15. ADVANTAGE
 Wide bandwidth
 High response speed
 Generate low noise
 High sensitivity to light
 Low sensitivity to temperature
 Low cost
 Small size
 Long lifetime

16. DISADVANTAGE
 Photodiode should be always operated in reverse bias
condition.
 Applied reverse bias voltage should be low.
 Light sensitive device
 Should not exceed the working temperature limit
specified by the manufactures.

17. APPLICATION
 In Signal Isolators
 The PIN diode is used as an ideal radio frequency
switch.
 The PIN diode is used as a photo detector to convert
the light into the current.
 This diode is an ideal element to give electronics
switching in applications of electronics.
 In Medical treatment(MRI )
 High Voltage Rectifier

18. NEW RESEARCH
 A simulation research on the reverse recovery
characteristics of PIN diode
 From the basis of math-physics , the reverse recovery
characteristics of the power PIN diode are studied in
detail .The simulation model of PIN diode which can
describe correctly the reverse recovery current is
obtained.

19. THANK YOU