Tongher electric fence energizer,how to connect electric fence with CCTV cameras,and alarm systems,with NO/NC,alarm in to integrate,triggering an alarm when the fence wires are cut.
Contact for more detail:dragon@tonghertech.com/www.tonghertech.com
3. NO/NC output
• The most common integration for security products,such as
DVR,alarm system,digital map,etc
• NO/NC means normally open or normally close
• There are three pins on NO/NC port:NO,COM,NC
4. How it works
• You can integrate any security products only if there has
NO/NC port(Alarm in)
• In normal situation,the circuit will be open(close),but when
there is alarm,it will be close(open) to trigger other security
products.
• The main function of NO/NC is trigger,through open/close to
trigger other security products.
• It can not be used as a specific tool to control the energizer or
other security products(i.e,when connected to alarm
system,when the electric fence wire is cut,the alarm system will
receive the alarm signal from the energizer,but you can not
control it)
8. • Every integration plate can integrate 8
devices,can upgrade to 32 devices max.
• Usually used in sensor and cctv integration
• Convert RS485 to NO/NC to trigger
9. DC12V output
DC12V output can integrate any security products below 10W,such as siren,speaker.
Simply connect the siren or light to the DC12V port
Light
Integration of siren and light
10. Thanks!!
• Any more question,please contact us
for detail.
• Dragon@tonghertech.com
• Tel:+86-755-23710212
Shenzhen Tongher Technology Co.,Ltd www.tonghertech.com
