Specification of protocols. Schedule of implementation & out testing program

1. Khamdamboy Urunov, a Ph.D. student.
Special Communication Research Center.,
Graduate School of Financial Information Security.,
Kookmin University
Seoul, South Korea
Specification of Out Testing mechanism for
Underwater Internet of Things (UIoT).
Implementation & out testing programming schedule

2. Plan
1. Specification of Out Testing mechanism for Underwater Internet of
Things
a. Protocol Specification parameters
b. Specification protocol with Security of authentication mechanism
2. Implementation Out testing mechanism
a. Security of authentication mechanism
3. U_CoAP implementation (server part) based on Java
2

3. • Communication service specification should generate service primitives for a
conversation between two machines.
3
1. Protocol Specification parameters
Communication service specification

4. Data Transfer phase specification
4
1. Protocol Specification parameters (2)

5. 5
Data Transfer phase specification
1. Protocol Specification parameters (3)

6. 6
Data transmission parameters consist of several steps:
• rdt_data_request(data): compute checksum, make_pkt,
send(sndpkt).
• rdt_data_indication(rcvpkt):
• receiver receives the data and sends an ACK, In case of corrupted
data
reception, sends NACK.
• rdt_rcv(rcvpkt): (at sender)
• performs reception of packet (ACK or NACK)
• If ACK then send next data, if NACK then retransmit the data.
• rdt_send(ACK): receiver sends the ACK.
• rdt_send(NACK): receiver sends the NACK.
• isNACK(rcvpkt): checks for negative acknowledgment reception
• isACK(rcvpkt): checks for positive acknowledgment reception
• corrupt(rcvpkt): checks the packet for corrupted data
• Notcorrupt(rcvpkt): checks for non corruption
• extract(rcvpkt,data): extracts the data from received packet
• deliver data(data): delivers data to the upper layer
1. Protocol Specification parameters (4)

7. 7
Leaf Nodes (LN)Terrestrial IoT
Server (TIS)
DTN Gateway Cluster
Header (CH)
2. Implementation Out testing mechanism
Testing procedure: Out test is using checking process of communication possibility. In the diagram
Terrestrial IoT Server (TIS) is sending ping message to DTN Gateway, if conjunction is OK after that DTN
gateway to send CH again checking required in order to nice, last checking is CH and LN communication
surround whole system.

8. 8
2. Implementation Out testing mechanism (2)
Terrestrial IoT Network elements (using technical devices) like application program (using apps) connect to
underwater devices. Out testing parameters surround whole system elements and communication networks.

9. 9
2. Implementation Out testing mechanism (3)

10. 10
2. Implementation Out testing mechanism (3)

11. U_CoAP implementation (server part)
based on Java
11

12. • Thank you
12