1. Dear Sir
Ideally, working in QC/QA, steel structure, tanks/pressure vessels/boiler ,piping/pipe lines and welding
Engineering field will allow me the opportunity to utilize my professional experience and skills in
conducting and controlling the functions which I gained through working in multinational manufacturing
atmosphere and I would like to be part of an organization that offers potential growth, advancement
opportunities and stability.
For your convenience; I have attached my resume for your review. Realizing the limitations of the written
pages in presenting my qualifications and I would welcome the opportunity to participate in a personal
interview to answer any of your questions and better present my qualifications.
Thank you for your time and consideration
Sincerely,
Eng. Hazem Ouda
Page 1 / 10

2.  : [Meet sohail, Ment Al Kamh, Al Sharkia, Egypt]
Tel. : [+20 55 3 888 340, +20 100 601 8772, +966543713001
E-mail : [hazem_oda77@yahoo.com, hazem.ouda@dargroup.com]
Hazem Mohammed Abd El
Moniem Ouda
OBJECTIVE
Seeking a challenging position in the Quality Control and welding of Oil and Gas Field, Tanks Construction,
Pressure Vessels Fabrication, piping works, pipe line , and Steel structure work in a company, which is
dynamic and progressive, a position where hard workers are recognized developed and rewarded.
PERSONAL INFORMATION
Date of Birth ■ January 30th
1977
Military Service ■ Completed
Marital Status ■ Married
Nationality ■ Egyptian
KEY QUALIFICATIONS
2011 ■ Certified CSWIP 3.1 certificate no. 25104 expiry 27-07-2016 (Certification Scheme
For Welding Inspection Personnel)
2010 ■ Certified for UT Level (II) according to ASNT-TC-1A,
{Ref. ASNT level III # 140184, Mr.Samer Amer “National Inspection Co.”}.
2010 ■ Certified for RT Level (II) according to ASNT-TC-1A,
{Ref. ASNT level III # 140184, Mr.Samer Amer “National Inspection Co.”}.
2010 ■ Certified for MT Level (II) according to ASNT-TC-1A,
{Ref. ASNT level III # 140184, Mr.Samer Amer “National Inspection Co.”}.
2010 ■ Certified for PT Level (II) according to ASNT-TC-1A,
{Ref. ASNT level III # 140184, Mr.Samer Amer “National Inspection Co.”}.
2007 ■ BOSIET –Basic Offshore safety induction and Emergency training course (including HUET&
EBS ), By ISTC “International Safety Training center “, Malta
2007 ■ Hydrogen Sulphide (H2S), By ISTC “International Safety Training center “, Malta
2006 ■ Certified CSWIP 3.1 certificate no. 25104 expiry 27-07-2011 (Certification Scheme
For Welding Inspection Personnel)
2005 ■ Certifications from Arab Contractor’s Computer Center for AutoCAD.
2005 ■ Industrial Metallurgy course by Faculty of Engineering Cairo University
2005 ■ Certified for RT Level (II) according to ASNT-TC-1A,
{Ref. ASNT level III Mr. Atef Nasser “WECO office”}.
2005 ■ Certified for UT Level (II) according to ASNT-TC-1A, certificate no.UT/003/2005
Page 2 / 10

3. {Ref. ASNT level III # KM-714, Mr. Abd allah “Detection office”}.
2003 ■ Certified for MT Level (II) according to ASNT-TC-1A, certificate no.MT/003/2003
{Ref. ASNT level III # KM-714, Mr. Abd allah “Detection office”}.
SKILLS
Computer ■ Excellent in Microsoft Office – Internet -Soft ware.
■AutoCAD.
- ■ TEKLA Structures v14.1
Languages ■ Very good command of English Language.
■ Arabic is a mother tongue
Professional ■ Written and oral communication skills ■ Presentation skills
■ working under pressure ■ Decision-making skills
■ Problem solving skills ■ Multi-task ability
BASIC EDUCATION
2000 ■ B.Sc. metallurgical engineering, Faculty of petroleum and mining engineering, Suez Canal University,
Grade good.
WORK EXPERIENCE
Employer : Dar Al-Handasah “Shair and Partners”, Consultant company.
Period : [November 2007 – To Date]
The description of the project that I have been working with as follows:
Project name : Haramain High speed railway at Makkah stations, Saudi railwayorganizations, kingdom Saudi Arabia KSA.
Project scope : Fabrication and erection of 16000 tons of heay steel structures ,project cost 3.2billions SR
On Area of 1,500,000 m2
Contractor : Saudi Bin Ladin Group, SBG and SBC”
Period : February 2013 – To date]
Title : Consultant Senior Steel structure Engineer.
Project name : King Seoud Bin Abd ElAziz University for health and science, at Riyadh and al Hasa , kingdom Saudi Arabia
KSA.
Project scope : Fabrication and erection of 5000 tons of heay steel structures and various sizes of API 650
Storage tanks, Project cost 21billions SR on area of 3,000,000 m2
Contractor :Saudi Bin Ladin Group, SBG and SBC”
Period : [May 2011 – February 2013]
Title : Consultant steel structure and tanks Senior Engineer.
The academics complex was created as a modern icon for the campus that could hold numerous areas of program
elements in a single unified manner. The three buildings of the academics complex are contained under the super-
roof structure and linked by the large curved circulation front piece. The courtyard that internally links these buildings
serves as a multipurpose and dynamic outdoor area for students and faculty.
The academic complex holds the College of Nursing, College of Applied Medical Sciences, University
Administration, University Center & Deanship, and Research facilities. These programs vary greatly in size, function,
access abilities and gender usage. However, all are link by the roof and courtyard spaces.
The major public spaces of the academics colleges are located along the curved front piece of the building.
Bridges provide systems for connection, linking public spaces to activate more distant areas while tying to the
University Center.
The work scope was Supervision of construction for all buildings steel structure including Academic Building, Sports
&Recreation Complex and Utilities Buildings. Supervision of steel structures erection and welding for 3,500 ton of
heavy steel structure as per AISC and AWS D1.1. Supervision of fabrications &installations of two storage water
tank 650 m3 as per API 650.
Project name : NEW MAIN BRINE INTAKE PUMPING STATION AT THE DEAD SEA for Arab Potash
Company, Jordan.
Project scope : erection and welding of 4,000 ton of heavy steel structure at off-shore jetty & erection and
Page 3 / 10

4. welding of 80” pipe lines of 3Km at in-shore and off-shore jetty.
Contractor :Sener Arda “Turkish Company”
Period : [February 2010 – May 2011]
Title : Consultant Steel Structure and Piping Senior Engineer.
New Main Brine Intake Pumping Station at the Dead Sea, Jordan. Study of various means for increasing the
supply of the Dead Sea Brine despite recession of the Dead Sea water level; these broadly include either
rehabilitation of the existing 2 intake pumping stations, or the introduction of a third station. The stations comprise
jetty heads with pumps and supports, roadways, pontoons in addition to dredging works and all appurtenances.
Preparation of detailed engineering design and tender documents, offshore and onshore piping material selection
to withstand the heavy corrosion and erosion characteristics of the Dead Sea Water, construction contract
management, and supervision of construction for the selected alternative.
Main Tasks and Duties
 Verifying /reviewing all project quality documents prepared by the subcontractor such as method of
erection statement, NDT procedures, RT maps, Dimension procedures, welding procedure specifications
and inspection test plans.
 Verifying that the contractor adhere to the approved procedures.
 Reviewing and approving pipe lines shop drawings.
 Preparing and reviewing the field erected shop drawings for site field necessities.
 Reviewing the out of code/specification tolerance based on the various codes/ specifications tolerance and
work man ship/experience and taking the final decision.
 Describing the out of tolerance issues and discussing them with the designer for comment/approval.
 Verifying and Follow up the construction /erection at field site and conduct/ review all required
applicable code tests such as material receiving inspection, visual tests , dimension test , NDT test.
 Painting inspections for field welds and touch up.
 Finial inspections of the steel structure including, but not limited, dimension check (plumpness, levels, co-
ordinations, horizontal distance, vertical distance, Bow), torque and sung tightening, visual tests and NDT
tests on the welds.
 Finial inspections of the pipe lines including, but not limited, dimension check (straightness, levels, co-
ordinations and nozzles location), mechanical coupling installation, dismantling joints installation, flexible
joints installation, flow meter installation, expansion joints installation, visual tests and NDT tests on the
welds.
 Preparing and finalizing the punish list.
 Reviewing the handled over quality document including as built drawings.
Project name : Expansion of cold crystallization plant for Arab Potash Company, Jordan.
Project scope : Fabrication and erection of various sizes of API 650 storage tanks and ASME VIII-1
Pressure vessels
Contractor :Petrojet “Egyptian construction/Petroleum Company”
Period : [November 2007 – February 2010]
Title : Consultant Mechanical Quality Senior Engineer.
Plant Optimisation and Production Expansion Projects for the Arab Potash Company - Supervision of the Cold
Crystallisation Plant (CCP), Compaction Plant (CP) and Coarse Carnalite, Jordan. Supervision of a new state- of-
the-art Cold Crystallization Plant (CCP) as part of the expansion works required to reach a total Potash production
of 2.45 million tons per year. The new CCP decomposes, under controlled conditions, the carnalite harvested from
Page 4 / 10

5. the ponds, and then crystallizes potash which is then carefully upgraded to commercial standards for sale as
fertiliser. Works include several large tanks and process vessels (crystallizers and thickeners); specialised custom
designed process equipment such as centrifuges, screening circuits, potash compaction equipment, product dryer
and cooler plant, gas scrubbers, etc; and extensive specialised process piping to transfer the carnalite and potash
slurries between process units.
Main Tasks and Duties
 Verifying /reviewing all project quality documents prepared by the subcontractor Petrojet (PTJ) such as
method of erection statement, NDT procedures, RT maps, Dimension procedures, welding procedure
specifications and inspection test plans.
 Verifying that PTJ adhere to the approved procedures.
 Preparing and reviewing the field erected shop drawings for site field necessities.
 Reviewing the out of code/specification tolerance based on the various codes/ specifications tolerance and
work man ship/experience and taking the final decision.
 Describing the out of tolerance issues and discussing them with the designer for comment/approval.
 Verifying and Follow up the fabrication at shop and conduct/ review all required applicable code tests
such as material receiving inspection, visual tests , dimension test , NDT tests.
 Verifying and Follow up the construction /erection at field site and conduct/ review all required
applicable code tests such as material receiving inspection, visual tests , dimension test , NDT test.
 Painting inspection for the tanks and vessels.
 Finial inspections of the tanks and vessels as per API 650 and ASME VIII-1 and preparing the punish list.
 Reviewing the handled over quality document including as built drawings.
Employer : SGS company [Multinational Company]
Period : [December 2006 – To November 2007]
Project name : EBIC Ammonia Plant project (El-Sokhna Port) the main contractor is KBR - HALLIBURTON
Project scope : Erection/ construction of two ammonia tanks according to API620 with dimension 53 m diameter
and 30 m height of material grade ASTM A 537 Cl 1
Period : [December 2006 – November 2007]
Title : Site QC Engineer/head.
Main Tasks and Duties
 Preparing all project quality documents such as method of erection statement, NDT procedures, RT maps,
Dimension procedures, welding procedure specifications and inspection test plans.
 Verifying and Follow up the construction /erection at field site and conduct/ review all required applicable
code test such as material receiving inspection, visual tests , dimension test , NDT test.
 Participating discussion the quality needs with the quality manager
 Participating in determining the resources and man power needed
 Preparing the QC plans.
 Coordinating and expediting site and work shop activities
Page 5 / 10

6.  Managing and supervising QC staff at site in order to accomplish the construction code requirements.
 Preparing the NDT documentation
 Handing over of all quality document
Employer: TIC “Technical Inspection &control “, Inspections Tunisian Company.
Period : [November 2005– December 2006]
The description of the project that I have been working with as follows:
Project name : Plant maintenance inspections of onshore petroleum fields “Abo ELtafi “ and offshore petroleum
fields “El Bouri “ , For Agib and Eni “Oil Italian companies” in Libya .
Project scope: Visual and NDT inspections for pipes lines, storage tanks and pressure vessels.
Period : [November 2005 – December 2006]
Title : Senior Quality control Engineer.
Main Tasks and Duties
 Preparing all project quality documents such as NDT procedures, welding procedure specifications and
inspection test plans.
 Conducting and reviewing all the required tests which are visual test, UT and painting checks.
 Preparing the required reports showing the inspection result and making the assessment based on the
applicable codes/specifications.
 Preparing weekly reports to the client and discuss all the required inspections plans /requirements with the
client.
 Preparing the NDT documentation.
 Handing over of all quality documents.
Employer : The Egyptian German company for metal constructions (DSD FERROMETALCO).
Period : [September 2002–November 2005]
The description of the project that I have been working with as follows:
Project name : several projects on the work shop factory.
Period : [September 2003–November 2005]
Title : Quality control head for Material receiving and prefabrication section.
Main Tasks and Duties
 material inspection receiving according to DIN, EN, ASME &ASTM which include” but not limited”
visual check, dimension check, marking reviewing and reviewing the mill test certificates against the
applicable code /specification.
 Conducting the required NDT tests on the inspected material.
 Preparing mechanical tests specimen for conducting tension &impact, bend,…tests according to DIN, EN,
and ASME &ASTM.
 Verifying that all material participated is identifying and traced.
 Welding inspection (visual test, MT, RT&UT).
 Dimension inspection according to drawing &Specs and identify the out of tolerance items.
Page 6 / 10

7. MAN
 Preparing all project quality documents such as NDT procedures, welding procedure specifications and
inspection test plans.
 Coordinating and Communicating with the ASME Authorized Inspector (AI).
 Following up the Activities according to QC Plan with the AI
 Coordinating the NDT Activities according to the relevant procedures.
 Preparing the NDT documentation.
 Handing over of all quality document
Some projects:
A- Cairo North Power plant (NEM), ASME pressure vessel, boilers, structural steel works.
B-Nubaria Power Station (ALSTOM), ASME pressure vessel, boilers.
C-Nubaria Power Station (KAFEER- RACO ENGINEERING), Structural steel works.
D- Great man Libya river (vinci) piping & pressure vessel according to PD 5500).
E- Fabrication of Low Temperature Converter of Material P No. 1 with thickness 55 mm for UHDA Company.
F- Fabrication of High Temperature Converter, material P No. 4 with thickness 72 mm for UHDA company.
G-Construction of (TORREVALDALIGA NORD POWER PLANT) Supply and erection of 60MW
Coal-Fired Supercritical Boilers.
Clients:
a- NEM
b- Vinci
c- Uhde
D- KAFEER- RACO ENGINEERING
E- DSD nonel
F- Man Technology
G- ANSALDO
Project : several projects on the work shop factory
Period : [September 2002 – September 2003]
Title : Quality control and material receiving Engineer.
Main Tasks and Duties
 Material inspection receiving according to DIN, EN, ASME &ASTM which include” but not limited”
visual check, dimension check, marking reviewing and reviewing the mill test certificates against the
applicable code /specification.
 Conducting the required NDT tests on the inspected material.
Page 7 / 10
Uhda

8.  Preparing mechanical tests specimen for conducting tension &impact ,bend l ,…tests according to DIN
,EN,ASME &ASTM
■ Communicating and coordinating with the ASME Authorized Inspector (AI)
■ Verifying conformity of incoming items with checking packing list against the purchase order
■ Verifying that the load is damage free
■ Performing random dimensional check
■ Issuing the relevant report and distribute it to concerned bodies
■ Special Care is paid to ASME MATERIAL such as:
● Verifying that the product marking is matching with the requirements of material Spec.
● Verifying the link between the physical product and the relevant mail certificate with checking heat
number or plate identifier for plates
● Issuing the MRIR (Material Receiving Inspection Report) for ASME accepted material
● Verifying the conformity of the mill certificates with the requirements of ASME material specification
Note: the reference is ASME Code Section II (A)
■ Verifying that all material participated are identifying and traced.
■ Verifying joints fit up and dimension control
■ Verifying the WPS's & PQR's
■ Verifying of welders qualifications
■ Issuing the relevant NDT reports
■ Verifying procedure, conducting and Chart of PWHT
Employer : Egypt Japan Steel Workers (EJSW).
Period : [September 2001–September 2002]
The description of the project that I have been working with as follows:
Project name : several projects on the work shop factory.
Period : [September 2001–September 2002]
Title : Quality control head.
Main Tasks and Duties
 Material inspection receiving according to DIN, EN, ASME &ASTM which include” but not limited”
visual check, dimension check, marking reviewing and reviewing the mill test certificates against the
applicable code /specification.
 Following up the forging and machening process.
 Conducting the final dimension check and other NDT on the finished products.
 Prepare a WPS for welding repairs of the forging defects and verifying its application.
 Preparing heat treatment procedure for the semi-fished product and follow-up its applications based on the
applicable code.
 Conducting mechanical and chemical tests on the semi-finished/finished product and preparing product
test certificates.
Page 8 / 10

9.  Preparing the final documents and handle them over to the clients.
 Preparing a calibration plan for measuring tools, furnace temperature indicators, mechanical tests
equipments and NDT equipments.
 Participating in the renewal of the ISO 9000 certificates.
Clients:
a- Petrojet
b- Enppi
c- Petrobil
d- DSD Feromettalco.
Scope of Work Summary/ Job Description:
• Performs visual and dimension inspections for welds and material.
• Working in a/m projects According to AWS D1.1, ASME, EN, API650, API620 and ASME B31.3.
• Checking welding book (WPS, PQR, and Welder Certifications according to the relevant codes).
• Checking condition of welding equipments of these welding processes: SMAW, GMAW, GTAW, FCAW,
and SAW.
• Classifying and verifying the conformance of base metals and filler metals identifications.
• Report contractor deficiencies by/ with making and raising NCRs wherever necessary & ensures that these
are finalized.
• Perform, review, approve and authorize the quality - / inspection - / NDT documents (like PQP, ITP and
NDT reports).
• Ensures proper storage and preservation of materials and sensitive items and conducting the material
receiving inspections with reviewing its dimension, visual inspection, code marking and material test
certificates according to applicable working codes ASME, ASTM, API or EN.
When appropriate authorizes / witnesses contractor’s pre-commission tests and / or calibrate equipment
prior to installation.
• Follow and Check the Pre-assembly according to applicable codes/specs (connection, alignment, leveling &
positioning of members and of joints& dimensions).
• Checking of machining for mechanical parts (Surface Roughness& Dimension according to specific of
client or applicable code & shop acceptance).
• Review/implement approved hydrostatic test procedure and review/supervise the PWHT.
• Assure that all the quality requirements and inspections are performed in accordance with the approved
Project Quality Plan and / or Inspection Test Plan.
• Monitors construction quality on a daily basis.
• Monitors and stays abreast of the day-to-day work of Contractor and / or inspection services specific to
his/her discipline and ensures their qualifications.
Page 9 / 10

10. Discusses quality deficiencies, construction deviations and inspection findings and develops win-win
solutions.
• Finalize and check the documentations of the projects before approved form the third party and client
• Assure that all inspection records / quality documents and relevant project documents will be maintained
and archived according the project execution plan (hardcopy and / or electronically).
• Addresses QA/QC requirements associated with equipment manufacture and supply, fabrication and field
assembly/construction are fully met.
• Brings any safety, environmental or security issues to the attention of the Mechanical Lead / Shell
Construction Manager.
References:
1- Eng. Adel El bandrawy , quality manager of EJSW ,cell phone :+20 112511116
2- Eng. Walid EL Banna , quality manager of DSD ,cell phone :+20123994296.
Walid.elbanna@dsd-steel.net.
3- Eng. Mohamed El Sayed , ASME Authorized Inspector of LIoyd`s ,cell phone: +20123104723
4- Eng. Adel Shafshak , ASME Authorized Inspector of LIoyd`s , cell phone :+20111109881
5- Chamek yousef, TIC cor. For Libyan branch, cell phone +218913209273.
6- Eng. Adel Afifi, ASME Authorized Inspector of FM/ TUV/ BV, cell phone: +20 10 102 3429.
adel.afify@eg.bureauveritas.com.
7- Eng.Ibrahem El Doseky, ASME Authorized Inspector, cell phone +20106096299.
Reference& supporting documents are available upon request
Hoping my skills meet your requirements
Best regards
Hazem Ouda
March 2014
Page 10 / 10