1. CRISTAMID
®
Fiche Technique Commerciale / Technical Data Sheet
SemiAromatic PolyAmides
MS 1100
PROPRIETES GENERALES / GENERAL PROPERTIES
Echantillons conditionnés 15 jours, 23°C - 50 % H.R. Valeurs typiques / Typical Values
Test pieces conditioned in 15 days, 23°C - 50 % R.H.
Nature & Désignation ISO 1874 - PA12/xx, MHL, 12-020
Densité / Density ISO R 1183 D g/cm3 1,03
Dureté instantanée / Instantaneous hardness ISO 868 Shore D 81
Dureté à 15 s / Hardness at 15 s -"- -"- 77
Température transition vitreuse / Glass ISO 11357 °C 123
transition temperature (Tg)
Indice fluidité / Melt flow index
275°C / 2,16 kg ISO 1133 cm3/10 mn 11
Traction / Tensile
Contrainte au seuil / Stress at Yield MPa 71
Allongement au seuil / Elongation at Yield ISO 527 % 6
Contrainte à la rupture / Stress at Break MPa 54
Allongement à la rupture / Elongation at Break % 182
Module de traction / Tensile modulus ISO 527 MPa 1880
Module de flexion / Flexural modulus ISO 178 MPa 1800
Choc Charpy / Charpy Impact 2
sans entaille / unnotched 23°C ISO 179/1eU kJ/m NC
sans entaille / unnotched -30°C -"- -"- NC
entaillé / notched 23°C ISO 179/1eA 2 8
kJ/m
entaillé / notched -30°C -"- -"- 12
Température de fléchissement sous charge /
Heat deflection temperature under load of ISO 75
0.45 MPa °C 101
1.80 MPa °C 94
DPT/FTC/010197/AOUT 2006
Les éléments contenus dans ce document résultent d’essais de nos Centres de Recherche, complétés par une documentation sélectionnée : ils ne sauraient
toutefois constituer de notre part, ni une garantie, ni un engagement formel. Seules les spécifications précisent les limites de notre engagement. La
manipulation des produits, leur mise en oeuvre et leurs applications restent soumises à la réglementation résultant de la législation en vigueur dans chaque
pays et ne peuvent mettre en cause la responsabilité de notre Société.
The information contained in this document is based on trials carried out by our Research Centers and data selected from the literature, but shall in no event
be held to constitute or imply any warranty, undertaking, express or implied commitment from our part. Our formal specifications define the limit of our
commitment. No liability whatsoever can be accepted by Arkema with regard to the handling, processing or use of the product or products concerned which
must in all cases be employed in accordance with all relevant laws and/or regulations in force in the country or countries concerned.
Arkema
Département Polyamides
4-8 cours Michelet, La Défense 10 www.rilsan.com
F-92091 Paris La Défense cedex - France info.rilsan@arkema.com