This document provides instructions for making a toy LED glow using a 3v LED cell. It explains that LEDs have a positive and negative pin with the long pin being positive. It also notes that button cells power small electronics and have a positive and negative side. The instructions state to take an LED and cell, and in step 1, attach the LED's positive pin to the negative side of the cell.

1. fun2dolabs.org
Making Toy LED Glow
Fun Do Labs
TM
2
fun2dolabs.org

2. Fun Do Labs2
Requirements
LED Cell 3v

3. Fun Do Labs2
LED
LED has two pins - Positive (+) and Negative (-)
Long pin is positive and short is negative

4. Fun Do Labs2
Cell
Button cell is used to power small electronic portable
devices such as electronic safes, wrist watch, pocket calculator etc.
There are two sides in cell - Positive (+) and Negative (-)

5. Fun Do Labs2
Step - 1
Take Both LED And Cell

6. Fun Do Labs2
Attach LED positive pin to cell negative side
Step - 2

7. saurabh@fun2dolabs.org
@skjsaurabh | @fun2dolabs
Saurabh JainContact :
fun2dolabs.org