It is required that after the course study you should: Have a general concept about DT Master Panorama DT operation Master Panorama data analysis Chapter 1 DT Introduction Chapter 2 Panorama DT Introduction Chapter 3 Panorama DT Data Analysis Collect System Air interface data Analyze Air interface data Assist Export Analysis report Qualcom CAIT CDMA Air Interface Tester WILL TECH DM2K/Pecker Pecker Navigator, Pecker Analyzer Panorama Qualcom CAIT CDMA Air Interface Tester WILL TECH DM2K/Pecker Pecker Navigator, Pecker Analyzer Panorama

1. CDMA1XPilot Panorama
introduction
ISSUE 2.1

2. Page 2
Course objective
It is required that after the course study
you should:
 Have a general concept about DT
 Master Panorama DT operation
 Master Panorama data analysis

3. Page 3
Chapter 1 DT IntroductionChapter 1 DT Introduction
Chapter 2 Panorama DT Introduction
Chapter 3 Panorama DT Data Analysis
Contents of the course

4. Page 4
DT Devices Structure
PC
GPS Receiver
Analyzer
GSM Test
Mobile
ReceiverReceiverReceiver
GSM Test
Mobile
GSM Test
Mobile
CDMA
Terminal
 PC
 HASP
 TEST Devices
 GPS

5. Page 5
DT Tool Functions
Collect System Air interface data
Analyze Air interface data
Assist Export Analysis report

6. Page 6
DT Tool Sorts
 Qualcom CAIT
CDMA Air Interface Tester
 WILL TECH DM2K/Pecker
Pecker Navigator, Pecker Analyzer
 Panorama
Um

7. Page 7
Handset Parameter
1: Query ESN
for number allocation
SCH-X130: Enter:“5809540*45680” “24”  “****” ,Exit:“#02”
2: Data speed
Voice Service Test: 115.2kbps
Data Service Test : 230.4kbps
SCH-X130: Enter: “↑”“09720”,select “ 2 SIO ”“2 DS Baud”,
select relevant data speed
3: Debug Window
SCH-X130: Enter: “↑”“09720”, select debug screen

8. Page 8
Debug Window
SCH-X130
N00001/S13843
C0447 D097-12 T-13
P388
N00001: Network ID (00001) S13843: System ID (13843)
C0447 : Center Frequency (447)
D097 : RX power (-97dBm) -12: Ec/Io (-12dB)
T-13 : TX power (-13dBm), just in active state, the terminal will have actual value
P388 : PN Code (388)
General Statistic Item
 NID/SID
 Frequency
 PN
 RX
 Ec/Io
 TX
Rx + Tx ≈?
How to estimate if it
have interference?

9. Page 9
Questions
 What is DT tool function?
 What is DT tool structure?

10. Page 10
Chapter 1 DT Introduction
Chapter 2 Panorama DT IntroductionChapter 2 Panorama DT Introduction
Chapter 3 Panorama DT Data Analysis
Contents of the course

11. Page 11
Devices Connection
PC
(Windows)
USB Port
Serial
port
1X Mobile
GPS Receiver
HASP
How to select the cable connecting communication port?

12. Page 12
New Project

13. Page 13
Configure Project
Select this one for outdoor DT
Close Local
Longitude, it is a
integer, and can
be divided exactly
by 3
Configure save
path of project
data
Central Meridian is the longitude of the central meridian and is set based on an actual project.
The longitude of the central meridian must be divided exactly by 3 and should generally be
set as less than but nearest the actual local longitude

14. Page 14
Import Site Information
Site information Sample
using excel open it and edit (txt format)
Panorama site information.txt
Select site
information file

15. Page 15
Import Map
Be Imported map file
External Map include MapInfo (mif) map and
AutoCAD （ DXF ） map
Maps use other format map, such as “import maps window”
showing

16. Page 16
Configure Devices
Devices
configuration

17. Page 17
Configure Devices
Select
corresponding port
Select connection
equipment
1

18. Page 18
Save Project
SaveSave
A window will remind user give a name for this project. Appoint the save path, give
a name to the project and save.

19. Page 19
Connect TEST Devices
Connect
this operator may take a few minutes please waiting....this operator may take a few minutes please waiting....
If devices connect successfully, the log button will became red
Like following picture

20. Page 20
Log
Configure log Items
After configure log items, click OK to start DT
Log

21. Page 21
Configure Log Items
For CDMA2000 System, must select General TA Info Item

22. Page 22
Dial Configuration

23. Page 23
Dial Configuration
According to different test objective, the time configuration is divided toAccording to different test objective, the time configuration is divided to
two mode: long call & short calltwo mode: long call & short call
Adjust it to what we need.
Connect: Max allowable call
setup time
Duration: Lasts time of each
conversation
Interval: Time between two
voice calls
Select test type,
Can use Markov

24. Page 24
 Long call: could test the network coverage performance, call drop
rate, soft or hard handoff performance, etc.
Test Mode
 Short call: could test original or terminated call failure rate, etc.
16
50000
10
16
20
10

25. Page 25
Display Map &Site
1
2
3
4
Finish Step 1 to Step 4
Step 3 include configuration display sites and Map information

26. Page 26

27. Page 27
Finish TEST
Handset 2Handset 2
Step 1: tap End ， then SaveEndEndEndEnd
22
Step 1: End Dial -> Step 2: Save
Step 3: Stop Log -> Step 4: Save
Step 5: Close Project, Close Panorama Software

28. Page 28
Finish TEST
After step1 to step 4, can close the Project & Panorama
Step 2&4
Save
Step 3
Stop Log

29. Page 29
Questions
 How to configure central meridian?
 Why we use decimal Long-Lat coordinate system?
 What’s map unit be used in the coordinate parameters window?

30. Page 30
Chapter 1 DT Introduction
Chapter 2 Panorama DT Introduction
Chapter 3 Panorama DT Data AnalysisChapter 3 Panorama DT Data Analysis
Contents of the course

31. Page 31
Measurement Parameters

32. Page 32
Signal estimation

33. Page 33
Replay
Steps: Configuration one new project -> Import sites -> Import test data
-> New Status Window -> open replay file -> start replay

34. Page 34
Track & Statistics
Steps: Configuration one new project -> Import sites -> Import test data
-> New Map window/ Analysis
1: Simple Steps for Track 2: Simple Steps for Statistics

35. Page 35
RXAGC /TXAGC
Track of RXAGC
Statistic of RXAGC

36. Page 36
Total Ec/Io
Statistic of Total Ec/Io
Track of Total Ec/Io

37. Page 37
Coverage Area of Cell

38. Page 38
Statistic data export format
Chart format
Table format
HTML format
Word format (default)
Chart format
Word format, export statistic/track result to a word file, it can be a chart, table

39. Page 39
Questions
 Can panorama output track & statistic format analysis result?
 Can panorama output analysis data with word format?

40. Page 40
Course Review
 DT Concept
 DT basic principle
 Panorama DT method
 Panorama DT Data simple analysis
ReviewReview