Sun-Believable Solar Paint
•
5 j'aime•6,669 vues
Solar paint has been developed and dramatically simplifies the preparation procedures for nanocrystalline solar cells. Visit our website, KamatLab.com, for the latest news, publications, and research from our group.
Recommandé
Contenu connexe
Tendances
Tendances (20)
En vedette
En vedette (19)
Plus de kamatlab
Plus de kamatlab (13)
Dernier
Dernier (20)
Sun-Believable Solar Paint
- 2. Current preparation techniques for quantum dot solar cells require time-intensive, multi-step procedures. In order to make these cells commercially viable, this process must be simplified. Here we present a first step towards creating an economically viable solar paint that can be applied by simply painting onto an electrode.
- 3. a a
- 4. a b a
- 5. a b a d c
- 6. Cd2+ S2- 5 cycles TiO2 CdS/TiO2 1. dry & mix 2. make paste 3. apply paste Cd2+ Se2- 3 cycles TiO2 CdSe/TiO2
- 10. • • • • • • • •
Notes de l'éditeur
- Combine solvent, CdS, and TiO2 with mixing and light heat, ~40 C.Mix for at least 30 minutes before applying.It is also possible to make solar paint using a pseudo-SILAR (successive ionic layer absorption and reaction) process.
- Combine solvent, CdS, and TiO2 with mixing and light heat, ~40 C.Mix for at least 30 minutes before applying.It is also possible to make solar paint using a pseudo-SILAR (successive ionic layer absorption and reaction) process.
- Combine solvent, CdS, and TiO2 with mixing and light heat, ~40 C.Mix for at least 30 minutes before applying.It is also possible to make solar paint using a pseudo-SILAR (successive ionic layer absorption and reaction) process.
- Apply solar paint to an optically transparent electrode.Apply paint using a paint brush or with a doctor-blade method.Anneal using a hot air gun.
- Add drop of 1M/1M Na2S/S electrolyte to the Reduced Graphene Oxide/Cu2S counter electrodeSandwich the photoanode with the counter electrode and clip togetherTest the photoelectrochemical performance of the cell under AM 1.5, 100 mW/cm2 illumination.