1. Print Wallet
Size
“Certification
Cards For
Employees
Operator safety training & instructions and certification information.
Samples from online training course that meets the OSHA and ANSI
requirement for powered trucks.
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
2. This presentation is for illustration purposes
only and is not intended for training
purposes. It is your responsibility to strictly
follow all additional guidelines that apply to
your own workplace and equipment
operation.
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
3. New Lifts have replaced scaffolding and
“manbaskets”.
There are many different type of
lifts, generally referred to as “Aerial Work
Platforms”
Sample
HR Training University | 50 Fairview Ave. Pt. Washington, NY
11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
4. Main safety bodies for aerial platforms are:
OSHA and ANSI
Each agency issues safety standards that
must be followed
Supervisors and Operators should familiarize
themselves with the standards
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
5. Operators of Lifts should always inspect the
equipment each day before using. The
operator’s manual usually contains a
checklist to help you
Monthly or yearly inspections of equipment
must be conducted by a competent person.
Records must be maintained along with any
work that is done to the equipment.
Operating Instructions must always be posted
on the equipment and all operators should be
familiar with the contents.
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
6. At the conclusion of your
inspection report any damage
to your supervisor
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
7. Load tests must be conducted on a regular
basis. Never use a machine in need of repair.
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
8. HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
9. Test Drive the equipment and make sure the
brakes work properly.
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
10. The main part of the turret section are the rotation
bearing and motor, lift cylinder and boom pins and
bushings, and the hydraulic hoses and wiring.
The bearings and pins and bushings need to
be inspected from time to time for
lubrication and wear.
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
11. Sample from section on
“Manual and Decals”
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
12. Powerline Contact
Working Around
Powerlines
Tipover Hazard
Falls From Platforms
Struck or Crushed by
Lift
Improper
Maintenance
Other Hazards
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
13. 2 Hours
Of
Training
Included
for $49
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com
14. Register online with any major credit
card, only $49
Receive “Certificate of Completion” upon
completion and wallet size “certification”
card.
Just complete your on-site training with a
competent employee on the equipment you
will be using.
REGISTER ONLINE NOW> or call 800-501-
9440 for more info
HR Training University | 50 Fairview Ave. Pt.
Washington, NY 11050 | 800-501-9440 |
safetytraining.info@hrtraininguniversity.com