This document provides 8 easy steps to program an encoder using the UBIFAST Configuration Tool without any software or app installations. The steps include connecting the hardware, using a WiFi enabled device to access the configuration tool webpage, configuring incremental parameters like pulses per revolution and direction, entering absolute parameters like resolution and number of turns, reviewing the parameters, programming the encoder, and emailing the parameters for future reference.

1. No Sofware, No Apps, No Installations!
Learn How to Program your Encoder with the
UBIFAST Configuration Tool

2. Program your Encoder in 8 Easy Steps!
Try it!
Quick and
Easy!

3. Step 1
Connect the Hardware
Power Device

4. Step 2
Use a WiFi Enabled Device
Works with PC‘s, Tablet‘s and Smartphone‘s WiFi

5. Step 3
Configuration Instructions for Smart Phones
Connect to Wifi Hotspot
Choose POSITAL Configuration Tool
at the network list
Open the Webbrowser
Go to ubifast.fraba
Click Next and Start Configuration

6. Step 4
Configure Desired Incremental Parameters
Pulses Per Revolution (PPR)
Any value between 1 and 16384 pulses
Incremental Pulse Direction
„A before B“ or „B before A“
Incremental Output Driver
Push-Pull (HTL) / 8 – 30 V Supply Voltage
RS422 (TTL) / 5 V Supply Voltage or
RS 422 (TTL) / 8–30 V Supply Voltage
Click Next

7. Step 5
Enter Absolute Parameters
Singleturn Resolution
256 steps (8bit) to 65536 steps (16 bit)
Number of Turns
1 turn (singleturn) to
65536 turns (16 bit multiturn)
Code
Binary or Gray Code Output
Preset Value
0 to maximum resolution
Click Next

8. Step 6
Review Parameters
Verify the Incremental and Absolute
parameters
Click „Configure“ to start
programming the encoder

9. Step 7
Your Configuration was Successfull

10. Step 8
Email Parameter to POSITAL for Future References