IBM MQ V8, Enable Remote Access on Queue Manager, Allowing Remote connections, Connecting Remote Queue manager in Windows using MQ Explorer step by step process, Implementing enable Remote connections on Queue manager using commands, IBM MQ commands for creating Queue manager and creating objects in Linux

1. Creating QMGR and allowing Remote authorization
1) Create a Queue manager.
crtmqm <Queue Managername>
2) Start Queue Manager.
strmqm <QMGR Name>
3) VerifythatQMGR is running.
dspmq
4) Create a ServerConnectionchannel (itispossible inside of runmqsc<qmgr>)
Runmqsc<qmgr>
Ɩ define channel(<channel name>) chltype(SVRCONN)trptype(TCP)

2. From thisstepall stepswill runinside of runmqsccommand.
5) Start channel
start channel(<Channel Name>)
6) Create Listener.
define listener(<Listername>) trptype(TCP) port(<Portnumber)
7) Start Listener.
start listener(<Listenername>)
8) WebSphere MQV7.1 introducedCHLAUTH ruleswhichbydefaultbannedremoteaccessby
privilegedusers.Toturnoff CHLAUTH you are correctthat you can issue.
ALTER QMGR CHLAUTH(DISABLED)

3. However,youcouldalsoverysimplyallow yourself accessona particularchannel as
describedin CHLAUTH - Allowsome privilegedadmins.
9) IBM MQ V8 introducedConnectionAuthenticationwhichdefaultdemandsapasswordto
authenticate aremote privilegeduser.Tomake thisOPTIONAL(asitisfor non-privileged
users) youcan issue
ALTER AUTHINFO(SYSTEM.DEFAULT.AUTHINFO.IDPWOS) AUTHTYPE(IDPWOS)
CHCKCLNT(OPTIONAL)
10) rather thanturningit off completelywith
ALTER QMGR CONNAUTH(' ')
After either of these commands you'll need to issue the following
command for the queue manager to be aware of your changes.
11) Refresh Security mechanism on Queue manager.
REFRESH SECURITY TYPE(CONNAUTH)
REFRESH SECURITY
==============================================================
Adding Remote Queue Manager
Note:Make sure that youhave networkconnectivitybetweenthe systemswhere Local Queue
Manager available andWhere youare creatingremote definition.
1) RightClickon QMGR AddRemote Queue Manager

4. 2)
3)

5. 4) AfterclickingonFinishbutton youcansee the Remote Queue Managerentry.

6. If you are unable toconnectthenoptionallyexecutethe below commandalsoinabove
steps.
ALTER CHANNEL(<CHANNEL NAME>) CHLTYPE(SVRCONN) TRPTYPE(TCP) MCAUSER(‘mqm’)
Nowtry to connectby followingabove steps.
@Ravi Babu K
24|03|2017.