1. Introduction to Food
Processing

2. Why process foods?
• Extend edible time frame -Preservation
• Make better tasting foods
• Make more varieties of food
• Convenience

3. Drying
• Extraction of moisture by sun, air, heat or
vacuum to inhibit the growth of molds,
bacteria and yeasts
– Name 3 dried foods

4. Salting
• The addition of salt or a brine solution to
foods to decrease the activity of molds,
bacteria and yeasts.
– Name 3 salted foods

5. Curing
• The addition of a chemical compound
(sodium nitrate or sodium nitrite) to food to
slow the growth of bacteria.
– Name 3 cured foods

6. Fermentation
• The use of special bacteria, molds or
yeasts to prevent spoilage by converting
the elements of food that spoil easily to
stable elements that act as preservatives.
– Name 3 fermented foods

7. Freeze Drying
• The freezing of food and the subsequent
removal of water from the frozen food
through the use of heat and a vacuum.

8. Smoking
• The addition of smoke and heat to
preserve food by the action of the
chemicals from the smoked wood and the
partial drying of the food.
– Name 3 smoked foods

9. Canning/Aseptic Packaging
• The packing of food in a container, sealing
the container and heating it to sterilize the
food.
– Name 3 canned foods

10. Pasteurization
• The heating of milk and other liquids
which reduces the number of disease-
producing bacteria.
– Name 3 pasteurized foods

11. Refrigeration
• The lowering of the temperature of food to
inhibit the growth of bacteria, molds and
yeasts.
– Name 3 refrigerated foods

12. Freezing
• The lowering of the temperature of food to
temperatures below 28 degrees F to stop
the growth of bacteria, yeasts and molds
and to kill parasites.
– Name 3 frozen foods

13. Food concentration
• Heating food until it boils and removing the
water or partially freezing food and
removing water in the form of ice crystals.
– Name 3 concentrated foods

14. Irradiation
• Passing energy through food to destroy
insects, fungi, or bacteria that cause
human disease or cause food to spoil.
– Name 3 irradiated foods

15. Food Safety
• HAACP: Hazard Analysis Critical Control
Point
• What safety risk is present for each food
– Pathogenic microorganisms
• Bacteria, viruses
– Spoilage microorganisms
• Fungi, bacteria
• What foods are at greatest risk for
contamination?

16. Most important qualities to control
• pH
– Bacteria thrive in a pH neutral environment (7)
– Items with pH above 8 tend to be very bitter &
toxic
– Foods with pHs below 6 tend to be tart or sour
1 7 14
Bacteria
Yeast/Fungi

17. Qualities to control
• Temperature
• 40 – 140°F = the temperature danger zone
– Rapid multiplication of microorganisms
• <40°F very slow growth
• <28°F – no growth – no death
• >140°F – death of microorgamisms

18. Qualities to Control
• Moisture content & Protein content
• Bacteria need a high moisture content
• Fungi can grow in lower moisture
– Dry foods won’t make you sick
– Dry foods do spoil
• Bacteria need protein, fungi less so
– Candy & carbohydrates may spoil but don’t
won’t make you sick

19. Food Deterioration
• Enzymes break down proteins over time
– Must deactivate enzymes before food can be
stored
– Heat destroys enzymes
• Fats and oils can oxidize in storage
– Gives off flavors
– Need airtight packaging or antioxidant
additives