Kubota la1403 ec front loader service repair manualfjjskekdmmme
This document provides specifications and safety information for a Kubota front loader model LA1403EC. It includes:
1. Specifications for the loader model, bucket sizes, hydraulic system details, dimensions, and operational capacities.
2. Safety instructions for servicing the loader, including general precautions, safety starting and working procedures, avoiding fires, ventilation, acid burns, and emergency preparedness.
3. Terminology used to identify parts of the loader.
4. Tightening torques for screws, bolts, and hydraulic fittings on the loader.
5. Maintenance checklists and inspection procedures.
The document provides technical information and safety guidelines for servicing the Kub
Kubota la1403 front loader service repair manualfjjskekdmmme
This workshop manual provides information for servicing a Kubota LA1403 front loader. It is divided into three parts covering general information, the loader mechanism, and servicing procedures. The general section includes identification, safety, maintenance, and specifications. The mechanism section describes the construction and functions. The servicing section provides troubleshooting, repair, and assembly instructions.
Contenu connexe
Similaire à Kubota m108 s tractor parts catalogue manual
Kubota la1403 ec front loader service repair manualfjjskekdmmme
This document provides specifications and safety information for a Kubota front loader model LA1403EC. It includes:
1. Specifications for the loader model, bucket sizes, hydraulic system details, dimensions, and operational capacities.
2. Safety instructions for servicing the loader, including general precautions, safety starting and working procedures, avoiding fires, ventilation, acid burns, and emergency preparedness.
3. Terminology used to identify parts of the loader.
4. Tightening torques for screws, bolts, and hydraulic fittings on the loader.
5. Maintenance checklists and inspection procedures.
The document provides technical information and safety guidelines for servicing the Kub
Kubota la1403 front loader service repair manualfjjskekdmmme
This workshop manual provides information for servicing a Kubota LA1403 front loader. It is divided into three parts covering general information, the loader mechanism, and servicing procedures. The general section includes identification, safety, maintenance, and specifications. The mechanism section describes the construction and functions. The servicing section provides troubleshooting, repair, and assembly instructions.
Kubota kx121 2(h) excavator parts catalogue manualfjjskekdmmme
The document consists of the repeated text "classicmachinery.net" with no other substantive information. At the end, there is a brief note asking the reader to click a link for a complete manual, and to download a PDF first if there is no response to clicking the link.
John deere te gator utility vehicle service repair manualfjjskekdmmme
This technical manual provides information for servicing a Gator utility vehicle. It contains sections covering specifications, component locations, schematics, theory of operation, diagnostics, testing, repair and safety. Safety is the first section and provides instructions on battery safety, protective equipment, emergency procedures, charging batteries and acid burns. Technicians should follow all safety procedures when servicing this high voltage electrical system.
John deere pro gator 2030 utility vehicle service repair manualfjjskekdmmme
This document provides specifications for a John Deere ProGator 2030 Utility Vehicle. It includes specifications for the diesel engine, electrical system, fuel system, drive train, hydraulic system, tires, dimensions, torque specifications for fasteners, diesel fuel requirements, lubricants, and coolants. The specifications are organized into labeled sections for easy reference to details on particular systems.
John deere jx75 21 inch walk-behind mower service repair manualfjjskekdmmme
This technical manual provides specifications and information for John Deere 21-inch walk-behind mowers. It includes sections on general vehicle specifications, engine specifications, electrical specifications, fuel system specifications, transmission specifications, dimensions, torque specifications, lubricant specifications, and product identification locations. The manual is intended to be a reference for technicians and contains detailed technical data, diagrams, and instructions to service the mowers.
John deere je75 21 inch walk-behind mower service repair manualfjjskekdmmme
The document is a technical manual for John Deere 21-Inch Walk-Behind Mower models. It provides an introduction and overview of the manual's contents and organization. The manual contains sections on general specifications, engine specifications, electrical specifications, fuel system specifications, transmission specifications, dimensions, and torque specifications to assist technicians in servicing the mower models. It emphasizes reading all instructions before attempting any repairs.
John deere ja65 21 inch walk-behind mower service repair manualfjjskekdmmme
This technical manual provides specifications and information for John Deere 21-inch walk-behind mowers. It includes sections on general vehicle specifications, engine specifications, electrical specifications, fuel system specifications, transmission specifications, dimensions, torque specifications, lubricant specifications, and product identification locations. The manual is intended to be a reference for technicians and contains detailed technical data, diagrams, and instructions for servicing and repairing the mowers.
John deere ja62 21 inch walk-behind mower service repair manualfjjskekdmmme
This technical manual provides specifications and information for John Deere 21-inch walk-behind mowers. It includes sections on general vehicle specifications, engine specifications, electrical specifications, fuel system specifications, transmission specifications, dimensions, torque specifications, lubricant specifications, and product identification locations. The manual is intended to be a reference for technicians and contains detailed technical data, diagrams, and instructions to service various systems of the mower.
John deere jx85 21 inch walk-behind mower service repair manualfjjskekdmmme
This technical manual provides specifications and information for John Deere 21-inch walk-behind mowers. It includes sections on general vehicle specifications, engine specifications, electrical specifications, fuel system specifications, transmission specifications, dimensions, torque specifications, lubricant specifications, and product identification locations. The manual is intended to be a reference for technicians and contains detailed technical data, diagrams, and instructions for servicing and repairing the mowers.
Hyundai 40 ds 7e forklift truck service repair manualfjjskekdmmme
This document provides an overview and structure of a service manual for a machine. It contains 8 sections that cover general information, removal/installation procedures, power train, brake, steering, hydraulic, electrical, and mast systems. Each section is divided into groups that explain the structure, operation, inspection, troubleshooting, and repair of components within that system. Symbols are used to identify important safety information. Conversion tables are included to allow simple unit conversions.
Hyundai 35 ds 7e forklift truck service repair manualfjjskekdmmme
This document provides an overview and structure of a service manual for a machine. It contains 8 sections that cover general information, removal/installation procedures, power train, brake, steering, hydraulic, electrical, and mast systems. Each section is divided into groups that explain the structures, operations, inspections, troubleshooting, and maintenance procedures for the components in that system. Conversion tables are also provided at the end to allow simple conversions between different units of measurement.
Hyundai 35 bh 9 forklift truck service repair manualfjjskekdmmme
This document provides instructions for disassembling and assembling a steering unit. The major steps include:
1) Disassembling the steering unit by removing components like the end cover, gearwheel set, cardan shaft, distributor plate, check valve parts, sleeve, spool, and pressure relief valve parts.
2) Assembling the spool and sleeve with neutral position springs installed in slots. Bearing races and seals are also installed.
3) Lubricating O-rings and seals before installing them using special tools to push them into place in the housing.
4) Proper positioning and alignment of parts is important during assembly to ensure correct functioning of the steering unit.
Hyundai 33 df forklift truck service repair manualfjjskekdmmme
The document describes the structure and operation of the power train system of an industrial vehicle, including:
1. The main components of the power train system including the engine, transmission, drive shaft, drive axle, and brakes.
2. The transmission uses a torque converter and includes a forward clutch, reverse clutch, and output gear to transfer power from the input shaft to the output shaft in forward and reverse modes.
3. Oil is pumped through the system by a gear pump and controlled by a main relief valve and solenoid valve to engage the appropriate clutch for forward or reverse operation.
Hyundai 33 d 7e forklift truck service repair manualfjjskekdmmme
This document provides instructions for disassembling and assembling a steering unit. The disassembly process involves removing components like the end cover, gearwheel set, cardan shaft, distributor plate, spool, sleeve and seals. The pressure relief valve is also disassembled by removing the plug, seal washers, setting screw, spring and piston. The assembly process describes fitting components like the spool, sleeve, cross pin, bearings, O-rings and lip seal back into the steering unit housing using various tools. Special care and markings are required when assembling the neutral position springs in the spool and sleeve.
Hyundai 30 df forklift truck service repair manualfjjskekdmmme
The document describes the structure and operation of the power train system of an industrial vehicle, including:
1. The main components of the power train system including the engine, transmission, drive shaft, drive axle, and brakes.
2. The transmission uses a torque converter and includes a forward clutch, reverse clutch, and output gear to transfer power from the input shaft to the output shaft in forward and reverse modes.
3. Oil is pumped through the system by a charging pump in the torque converter and is filtered, cooled, and distributed to clutches by the transmission control valve to engage the appropriate clutch for the selected gear.
Hyundai 30 d 7e forklift truck service repair manualfjjskekdmmme
This document provides instructions for disassembling and assembling a steering unit. The main steps for disassembly are: removing the end cover and gearwheel set; taking out the cardan shaft and distributor plate; pressing out the spool, sleeve, bearing races and thrust bearing; and disassembling the pressure relief valve. The main steps for assembly are: assembling the spool and sleeve with neutral position springs; fitting the bearing races and cross pin; installing the O-rings and lip seal using assembly tools; and reassembling other components. Precautions and the correct assembly pattern are emphasized to ensure proper reassembly.
Caterpillar cat 323 d s excavator (prefix dkw) service repair manual (dkw0000...fjjskekdmmme
The document provides instructions for removing and installing a flywheel housing on a Caterpillar 3066 engine. It describes using lifting tools to remove the flywheel housing which weighs approximately 65 lbs. The procedure includes cleaning the mating surfaces, installing a new gasket, and securing the housing with bolts. Tools are also used to remove the old oil seal and install a new seal and crankshaft wear sleeve. Reinstalling the flywheel and electric starting motor completes the installation process.
Caterpillar cat 323 d s excavator (prefix cyd) service repair manual (cyd0000...fjjskekdmmme
The document provides disassembly and assembly instructions for a final drive on an excavator model 323D LN. Key steps include:
1. Removing the final drive cover, carrier assembly, sun gears, ring gears, and other components.
2. Disassembling the carrier assemblies by removing planetary gears, shafts, and bearings.
3. Assembling begins with pressing bearings into the main housing and determining the correct shim thickness. Seals, pins and other components are then installed to reassemble the final drive.
Caterpillar cat 323 d ln excavator (prefix sed) service repair manual (sed000...fjjskekdmmme
This document provides instructions for removing and installing piston cooling jets on a Caterpillar C6.4 engine. The procedure involves removing the oil pan, then removing each jet one by one using a 46 mm socket to rotate the engine. For installation, the jets are reinstalled and tightened to a specified torque, again using the socket to rotate the engine for access. Safety notices are provided to keep parts clean and prevent contamination.
2. F O R E W O R D
PURPOSE OF THE FLAT-RATE SCHEDULE
This flat-rate schedule has been prepared as a useful guide to help dealers and distributors in executing
servicing jobs effectively at fair prices. It provides for the standard operation times needed to do individual
servicing jobs. Please make full use of this schedule when charging for Warranty Adjustments or repair works
executed, or when estimating the costs required for service works.
USING THE FLAT-RATE SCHEDULE
To help dealers to identify correctly the details of service works to be done, the schedule is edited to include
exploded illustrations indicating clearly the points to service and the schedule of standard operation times.
The exploded illustrations are provided with emphasis on M108S. The time schedule is completed to be
readily understandable with the three headings: JOB CODE NUMBER, DESCRIPTION and STANDARD
OPERATION TIME.
1) EXPLODED ILLUSTRATION
Any of the following method is used to indicate the point to service;
(1) Indicating the point by using a leading line.
(2) Indicating the range of servicing by using the marking.
(3) Indicating the range of servicing by using a box of dotted line.
Identify the points or ranges to be serviced with any of these indications and select appropriate procedure for
the servicing with the relevant JOB CODE NUMBER.
2) JOB CODE NUMBER
In this flat-rate schedule, job code numbers are used as the service work control codes. Use these
numbers when filling out the Warranty Adjustment Request form.
3) DESCRIPTION
1. Each of the job descriptions listed covers all the works to be performed, from starting the servicing job to
the completion of the service work when the unit is fully restored to the operating condition.
This also includes incidental works such as cleaning, adjustment and inspection of the parts involved.
2. When the service work is to be done at two or more points, an item covering those points to service ( like
"STARTER ASSY. O.H." for example ) is to be selected, by referring to the exploded illustrations
provided. Do not try to look up individual items and combine them, which will end up in unnecessary waste
of time for double works.
4) STANDARD OPERATION TIME
This is listed in one tenth of an hour.
The time schedule has based on:
1. Service done by a mechanic with average ability and experience.
2. Use of special tools and mechanic's hand tools.
3. Use of adequate repair facilities with flat concrete floor and hoist.
The listed time includes:
1. Repair diagnosis time.
2. The time required to obtain necessary parts and tools.
3. The time required to clean and inspect internal parts during disassembly and assembly.
The listed time does not include:
1. The time required to clean and apply touch-up painting to the external outfits and implements not
specifically referred to in this flat rate schedule, except for those jobs that must meet WASH, CLEAN &
PAINT requirements.
2. Removal and reinstallation of optional equipment / implements and other attachments which are not
mentioned in this flat-rate schedule.
3. Removal and reinstallation of parts that have been fit at distributor's or dealer's option.
* IMPORTANT
The standard operation time for jobs requiring two people is listed as the jobs done by one person.
Therefore, the time should not be multiplied by 2.
KiSC issued 06, 2007 A
4. A V A N T - P R O P O S
BUT DU TEMPS DE REPARATION
Ce temps de réparation a été conçu pour servir de guide aux concessionnaires pour l'exécution efficace
des tâches d'entretien et de réparation à des prix justes. Il indique les durées normales requises pour
chacune de ces tâches. Ne manquez pas d'avoir pleinement recours à ce livret pour la facturation de travaux
de réglage sous garantie, de travaux de réparation ou pour le calcul du prix de travaux d'entretien.
UTILISATION DU TEMPS DE REPARATION
Afin d'aider les concessionnaires à identifier toutes les opérations nécessaires pour une tâche de
réparation, ce temps de réparation inclut des illustrations en vue éclatée. Colles-ci indiquent clairement les
diverses opérations de réparation et les durées normales requises pour l'exécution de chaque opération.
Dans les illustrations en vue éclatée, certaines opérations plus importantes sont indiquées par M108S. Pour
une compréhension claire et aisée de ce temps de réparation, les informations sont présentées sous trois
rubriques : REFERENCE DE LA TACHE, DESCRIPTION et HEURES DE MAIN-D’OEUVRE STANDARD.
1) ILLUSTRATION EN VUE ECLATEE
Divers symboles sont utilisés pour l'indication du point de réparation:
(1) Emploi d'une ligne en points de conduits pour l'indication du
point de réparation.
(2) Emploi de crochets pour l'indication d'une surface de réparation.
(3) Emploi d'un cadre en pointillés pour l'indication d'une surface de
réparation.
Identifiez le point ou la surface de réparation au moyen de ces symboles et sélectionnez la procédure
adéquate de réparation avec la REFERENCE DE LA TACHE appropriée.
2) REFERENCE DE LA TACHE
Les références de tâche de ce temps de réparation servent de codes de contrôle. Utilisez ces références
pour remplir les formulaires de Demande de réglage sous garantie.
3) DESCRIPTION
1. Chaque tâche indiquée couvre toutes les opérations nécessaires à son exécution complète, depuis les
opérations de préparation jusqu' à celles après lesquelles la machine est à nouveau en parfait état de
fonctionnement. Des opérations secondaires sont aussi indiquées, tel le nettoyage, le réglage et la
vérification de la ou des pièces concernées.
2. Lorsque la tâche de réparation est à faire en deux ou plusieurs points, trouvez un élément couvrant tous
ces points ("ENS. DEMARREUR, REVISER" par exemple) en vous aidant des illustrations en vue
éclatée. Ne tentez pas de combiner vous-même plusieurs points regardés séparément. Il en résulterait
des pertes de temps dues à des répétitions inutiles de travaux.
4) HEURES DE MAIN-D’OEUVRE STANDARD
Les durées normales d'exécution sont indiquées en dixièmes d'heure.
Elles sont basées sur les éléments suivants:
1. Réparation faite par un mécanicien possédant une expérience et une compétence moyennes.
2. Utilisation d'outils spéciaux et d'outillage à main de mécanicien.
3. Utilisation d'ateliers de réparation adéquats avec sol plat en béton et treuil.
Les durées d'exécution comprennent:
1. La durée du diagnostic de réparation.
2. La durée requise pour rassembler les pièces et outils nécessaires.
3. La durée requise pour nettoyer et vérifier les pièces internes lors de la dépose et de la pose.
KiSC issued 06, 2007 A
6. V O R W O R T
ZWECK DES PAUSCHALGEBÜHRENLISTE
Dieser Pauschalgebührenliste will ein nützlicher Führer für Händler sein, die im Dienstleistungsgewerbe
tätig sind, um angemessene Preise zu ermöglichen. Der Plan liefert Normarbeitszeiten, die für einzelne
Dienstleistungen benötigt werden, Bitte benutzen Sie den Plan bei Garantieleistungen, bei Reparaturarbeiten
oder bei der Kostenbewertung für Serviceleistungen.
VERWENDUNG DES PAUSCHALGEBÜHRENLISTE
Um Händlern dabei zu helfen, die von ihnen ausgeführten Serviceleistungen richtig einzuordnen, wurde
dieser Plan mit aufgelösten Einzeiteilzeichnungen versehen, die deutlich die einzelnen Serviceleistungen mit
deren Normzeiten darstellen. Diese auseinandergezogenen illustrationen wurden mit Schwerpunkt auf
M108S gestaltet. Der Zeitplan wurde, um übersichtlich zu sein, in die drei Hauptgruppen
ARBEITSKODENUMMER, BESCHREIBUNG und NORMALEARBEITSZEIT geliedert.
1) AUSEINANDERGEZOGENE DARSTELLUNG
Jede der folgenden Methoden ist dazu geeignet, eine Dienstleistung unter den richtigen Punkt
einzuordnen;
(1) Den Punkt mit der Führungslinie finden.
(2) Den Bereich der Dienstleistungen mit Hilfe der Klammer finden.
(3) Den Bereich der Dienstleistungen finden, indem man den Kasten
mit der gepunkteten Linie benutzt.
Finden Sie die Dienstleistung oder den Dienstleistungsbereich mit Hilfe dieser Methoden, und versehen Sie
die ausgewähltle Dienstleistung mit der jeweiligen ARBEITSKODENUMMER.
2) DIE ARBEITSKODENUMMER
In diesem Pauschalgebührenplan werden die Arbeitskodenummern als Kontrolkode für die Dienstleistung
benutzt. Bitte benutzen Sie diese Nummern, wenn Sie die Antragsformulare für Garantieleistungen ausfüllen.
3) DIE BESCHREIBUNG
1. Nachdem man den Arbeitsvorgang nach dem Plan aufgeschlüsselt hat, hat man mit der Summe aller
Arbeitsbeschreibungen den gesamten Arbeitsvorgang von Anfang bis Ende erfaßt. Dabei werden auch so
nebensächliche Arbeiten wie die Reinigung, Einstellung undn Inspektion der betreffenden Taile
berücksichtigt.
2. Wenn die Serviceleistung mehrere Punkte umfaßt, wird ein Posten gewählt, der diese Leistungen (wie
z.B. "ÜBERHOLUNG DES STARTERS GES.") uter Bezugnahme auf die aufgelösten
Einzelteilzeichnungen abdeckt. Es empfiehlt sich nicht, sich eigene Posten auszudenken, da Sie dadurch
nur Ihre Zeit verschwenden und sich doppeite Arbeit machen.
4) NORMALEARBEITSZEIT
Diese wird in 1/10 Stunden angegeben.
Der Zeitplan beruht auf:
1. Serviceleistungen, die von Mechanikern mit durchschnittlicher Fähigkeit und Erfahrung ausgeführt
werden.
2. Verwendung von Spezialwerkzeugen und anderem Handwerkszeug der Werkstatt.
3. Benutzung von geeigneten Reparatureinrichtungen (Ebene Betonböden, Hebezeug etc).
Zur angegebenen Zeit gehören:
1. Reparaturdiagnosezeit.
2. Die zum Beschaffen von Teilan und Werkzeugen arforderliche Zeit.
3. Die zum Reinigen und Überprüfen der internen Teile, einschließlich dem Zerlegen und dem
Zusammenbau, erforderliche Zeit.
KiSC issued 06, 2007 A
8. TABLE OF CONTENTS Page
[TMMa] MAINTENANCE SERVICE (ENGINE)........................................................................................... 1
[TMMb] MAINTENANCE SERVICE (BODY) .............................................................................................. 2
[TMMn] WASH, CLEAN, PAINT.................................................................................................................. 3
[TMMp] DIAGNOSIS GROUP, ENGINE ..................................................................................................... 4
[TMMs] DIAGNOSIS GROUP, ELECTRICAL AND HYDRAULICS ............................................................ 5
[TMMz] DIAGNOSIS GROUP, OTHERS .................................................................................................... 6
[TMAa] BONNET, COVER GROUP ........................................................................................................... 7
[TMAb] STEP, HOUSING COVER GROUP ............................................................................................... 9
[TMAc] FENDER, FLOOR, SEAT GROUP ...............................................................................................11
[TMBa] STEERING GROUP .................................................................................................................... 13
[TMBb] POWER STEERING GROUP...................................................................................................... 15
[TMCa] FRONT AXLE GROUP (2WD AND 4WD)................................................................................... 17
[TMCb] FRONT DRIVE SHAFT GROUP (4WD)...................................................................................... 19
[TMCc] FRONT DIFF. GEAR SHAFT GROUP (4WD) ............................................................................. 21
[TMCd] FRONT DIFF. CASE GROUP (4WD) .......................................................................................... 23
[TMCe] FRONT DRIVE OUTER GEAR UNIT GROUP (4WD)................................................................. 25
[TMDa] FRONT WHEEL GROUP ............................................................................................................ 29
[TMDb] REAR WHEEL GROUP............................................................................................................... 31
[TMEa] FUEL GROUP ............................................................................................................................. 33
[TMEb] COOLING GROUP...................................................................................................................... 37
[TMEc] LUBRICATION GROUP............................................................................................................... 39
[TMEd] INTAKE, EXHAUST GROUP....................................................................................................... 41
[TMEe] CYLINDER HEAD GROUP ......................................................................................................... 43
[TMEf] GEAR CASE GROUP.................................................................................................................. 45
[TMEg] CAMSHAFT, TIMING GEAR GROUP ......................................................................................... 47
[TMEh] FLYWHEEL, PISTON, CRANKSHAFT GROUP.......................................................................... 49
[TMEj] SPEED CONTROL GROUP........................................................................................................ 51
[TMEk] CRANKCASE, OIL PAN GROUP ................................................................................................ 53
[TMEm] BALANCER GROUP ................................................................................................................... 55
[TMEp] TURBO CHARGER GROUP....................................................................................................... 57
[TMEx] REPLACEMENT ENGINE GROUP............................................................................................. 59
[TMFa] SINGLE CLUTCH GROUP.......................................................................................................... 61
[TMGa] TRANSMISSION GROUP ........................................................................................................... 63
[TMGb] TRANSMISSION GROUP ........................................................................................................... 65
[TMGc] TRANSMISSION GROUP ........................................................................................................... 67
[TMGd] TRANSMISSION GROUP ........................................................................................................... 69
KiSC issued 06, 2007 A
9. [TMHa] BRAKE PEDAL GROUP.............................................................................................................. 71
[TMHb] BRAKE CASE GROUP................................................................................................................ 73
[TMHd] HYDRAULIC BRAKE GROUP..................................................................................................... 75
[TMHe] PARKING BRAKE GROUP ......................................................................................................... 77
[TMJa] FINAL DRIVE GROUP ................................................................................................................ 79
[TMJb] REAR AXLE GROUP .................................................................................................................. 81
[TMKa] REAR PTO GROUP .................................................................................................................... 83
[TMLa] HYDRAULIC GROUP.................................................................................................................. 85
[TMLb] HYDRAULIC LIFT COVER GROUP............................................................................................ 89
[TMLc] 3 POINT LINKAGE GROUP........................................................................................................ 91
[TMNa] ELECTRICAL GROUP (STARTER)............................................................................................. 93
[TMNb] ELECTRICAL GROUP (ALTERNATOR) ..................................................................................... 95
[TMNc] ELECTRICAL GROUP (BATTERY)............................................................................................. 97
[TMNe] ELECTRICAL GROUP (LAMP, RELAY, SWITCH) ...................................................................... 99
[TMNf] ELECTRICAL GROUP (SENSOR, PANEL) .............................................................................. 103
[TMNg] ELECTRICAL GROUP (WIRE HARNESS) ............................................................................... 105
[TMPb] FRAME GROUP (BODY) .......................................................................................................... 107
[TMRa] CABIN GROUP (BODY)............................................................................................................ 109
[TMRb] CABIN GROUP (AIR CONDITION)............................................................................................113
[TMRc] CABIN GROUP (ELECTRICAL).................................................................................................115
KiSC issued 06, 2007 A
10. TABLE DES MATIERES Page
[TMMa] ENTRETIEN (MOTEUR) ............................................................................................................... 1
[TMMb] ENTRETIEN (CORPS) .................................................................................................................. 2
[TMMn] LAVAGE, NETTOYAGE, PEINTURE............................................................................................. 3
[TMMp] GROUPE DIAGNOSTIC, MOTEUR .............................................................................................. 4
[TMMs] GROUPE DIAGNOSTIC, EQUIPEMENTS ELECTRIQUES ET HYDRAULIQUES ...................... 5
[TMMz] GROUPE DIAGNOSTIC, AUTRES ............................................................................................... 6
[TMAa] GROUPE CAPOT ET COUVERCLE............................................................................................. 7
[TMAb] GROUPE MARCHEPIED ET COUVERCLE DE CARTER D'EMBRAYAGE................................. 9
[TMAc] GROUPE AILE, PLANCHER ET SIEGE ......................................................................................11
[TMBa] GROUPE DIRECTION ................................................................................................................ 13
[TMBb] GROUPE DIRECTION ASSISTEE.............................................................................................. 15
[TMCa] GROUPE PONT AVANT (2RM ET 4RM) .................................................................................... 17
[TMCb] GROUPE ARBRE D'ENTRAINEMENT AVANT (4RM)................................................................ 19
[TMCc] GROUPE ARBRE D'ENGRENAGE DIFFERENTIEL AVANT (4RM) .......................................... 21
[TMCd] GROUPE CARTER DE DIFFERENTIEL AVANT (4RM) ............................................................. 23
[TMCe] GROUPE ENGRENAGE EXTERIEUR D'ENTRAINEMENT AVANT (4RM) ............................... 25
[TMDa] GROUPE ROUE AVANT ............................................................................................................. 29
[TMDb] GROUPE ROUE ARRIERE......................................................................................................... 31
[TMEa] GROUPE CIRCUIT DE CARBURANT ........................................................................................ 33
[TMEb] GROUPE CIRCUIT DE REFROIDISSEMENT............................................................................ 37
[TMEc] GROUPE CIRCUIT DE LUBRIFICATION ................................................................................... 39
[TMEd] GROUPE CIRCUIT D'ADMISSION ET D'ECHAPPEMENT........................................................ 41
[TMEe] GROUPE CULASSE ................................................................................................................... 43
[TMEf] GROUPE CARTER DE DISTRIBUTION ..................................................................................... 45
[TMEg] GROUPE ARBRE A CAMES ET PIGNON DE DISTRIBUTION ................................................. 47
[TMEh] GROUPE VOLANT, PISTON ET VILEBREQUIN........................................................................ 49
[TMEj] GROUPE REGULATION DE VITESSE....................................................................................... 51
[TMEk] GROUPE CARTER MOTEUR ET CARTER D'HUILE................................................................. 53
[TMEm] GROUPE MASSE D'EQUILIBRAGE........................................................................................... 55
[TMEp] GROUPE TURBOCHARGEUR................................................................................................... 57
[TMEx] GROUPE REMPLACEMENT DU MOTEUR ............................................................................... 59
[TMFa] GROUPE EMBRAYAGE SIMPLE................................................................................................ 61
[TMGa] GROUPE TRANSMISSION......................................................................................................... 63
[TMGb] GROUPE TRANSMISSION......................................................................................................... 65
[TMGc] GROUPE TRANSMISSION......................................................................................................... 67
[TMGd] GROUPE TRANSMISSION......................................................................................................... 69
KiSC issued 06, 2007 A
11. [TMHa] GROUPE PEDALE DE FREIN .................................................................................................... 71
[TMHb] GROUPE DE CARTER DE FREIN.............................................................................................. 73
[TMHd] GROUPE FREIN HYDRAULIQUE .............................................................................................. 75
[TMHe] GROUPE FREIN DE STATIONNEMENT .................................................................................... 77
[TMJa] GROUPE COUPLE CONIQUE.................................................................................................... 79
[TMJb] GROUPE PONT ARRIERE ......................................................................................................... 81
[TMKa] GROUPE PRISE DE FORCE ARRIERE..................................................................................... 83
[TMLa] GROUPE CIRCUIT HYDRAULIQUE........................................................................................... 85
[TMLb] GROUPE CARTER DE RELEVAGE HYDRAULIQUE ................................................................ 89
[TMLc] GROUPE ATTLELAGE 3 POINTS .............................................................................................. 91
[TMNa] GROUPE APPAREILLAGE ELECTRIQUE (DEMARREUR)....................................................... 93
[TMNb] GROUPE APPAREILLAGE ELECTRIQUE (ALTERNATEUR).................................................... 95
[TMNc] GROUPE APPAREILLAGE ELECTRIQUE (BATTERIE)............................................................. 97
[TMNe] GROUPE APPAREILLAGE ELECTRIQUE (LAMPE, RELAIS, INTERRUPTEUR)..................... 99
[TMNf] GROUPE APPAREILLAGE ELECTRIQUE (DETECTEUR, PANNEAU)................................... 103
[TMNg] GROUPE APPAREILLAGE ELECTRIQUE (FAISCEAU DE FILS)............................................ 105
[TMPb] GROUPE CHASSIS (CORPS) .................................................................................................. 107
[TMRa] GROUPE CABINE (CORPS)..................................................................................................... 109
[TMRb] GROUPE CABINE (CLIMATRISATION).....................................................................................113
[TMRc] GROUPE CABINE (ELECTIQUE)..............................................................................................115
KiSC issued 06, 2007 A
14. 1
[TMMa] MAINTENANCE SERVICE (ENGINE)
[TMMa] ENTRETIEN (MOTEUR)
[TMMa] WARTUNGSARBEITEN (MOTOR)
JOB
CODE NO.
REF.DE
LA TACHE
ARBEITS-
CODENR
DESCRIPTION DESCRIPTION BESCHREIBUNG
STANDARD OPERATION TIME
(IN HR.)
HEURES DE MAIN-D'OEUVRE
STANDARD
NORMALEARBEITSZEIT (IN STD.)
M108S
REMARKS
REMARQUES
ANMER-
KUNGEN
TMMa-001 ENGINE OIL CHANGE HUILE MOTEUR CHANGER MOTORÖL WECHSELN 0.2
TMMa-002
ENGINE OIL AND FILTER
CARTRIDGE
CHANGE
HUILE MOTEUR ET CARTOUCHE DU
FILTRE
CHANGER MOTORÖL UND FILTEREINSATZ WECHSELN 0.2
TMMa-005 FUEL HOSE, ALL CHANGE
DURITE D'ALIMENTATION DE
CARBURANT, TOUS
CHANGER KRAFTSTOFFSCHLAUCH, ALLE WECHSELN 3.8
TMMa-006 AIR CLEANER ELEMENT CHANGE ELEMENT DE FILTRE A AIR CHANGER LUFTFILTERELEMENT WECHSELN 0.1
TMMa-008 RADIATOR HOSE, ALL CHANGE DURITE DU RADIATEUR, TOUTE CHANGER KÜHLERSCHLAUCH, ALLE WECHSELN 1.0
TMMa-011 COOLANT CHANGE LIQUIDE DE REFROIDISSEMENT CHANGER KÜHLFLÜSSIGKEIT WECHSELN 0.5
TMMa-012 FUEL FILTER CARTRIDGE CHANGE CARTOUCHE DU FILTRE CHANGER KRAFTSTOFFFILTERPATRONE WECHSELN 0.5
TMMa-030 FAN BELT
CHECK,
ADJUST
COURROIE DE VENTILATEUR
VERIFIER,
REGLER
VENTILATORRIEMEN
ÜBERPRÜFEN,
EINSTELLEN
0.3
TMMa-031 BATTERY CHECK BATTERIE VERIFIER BATTERIE ÜBERPRÜFEN 0.2
TMMa-032 RADIATOR CAP CHECK BOUCHON DE RADIATEUR VERIFIER KÜHLERKAPPE ÜBERPRÜFEN 0.1
TMMa-033 VALVE CLEARANCE
CHECK,
ADJUST
JEU DE SOUPAPES
VERIFIER,
REGLER
VENTILSPIEL
ÜBERPRÜFEN,
EINSTELLEN
5.1
TMMa-035 COMPRESSION CHECK COMPRESSION VERIFIER VERDICHTUNG ÜBERPRÜFEN 5.4
TMMa-039
IDLING SPEED AND NO LOAD
MAXIMUM SPEED
CHECK,
ADJUST
VITESSE A VIDE ET VITESSE MAXIMALE
A VIDE
VERIFIER,
REGLER
LEERLAUFDREHZAHL UND
HÖCHSTDREHZAHL OHNE LAST
ÜBERPRÜFEN,
EINSTELLEN
0.3
TMMa-040 THROTTLE LINKAGE
CHECK,
ADJUST
ATTELAGE D'ACCELERATION
VERIFIER,
REGLER
DROSSELKLAPPEN-VERBINDUNG
ÜBERPRÜFEN,
EINSTELLEN
0.2
TMMa-042
ENGINE OIL, WATER AND
COMPRESSION LEAK
CHECK
FUITE DE COMPRESSION, D'HUILE
MOTEUR ET D'EAU
VERIFIER
MOTORÖL, WASSER- UND
DRUCKAUSTRITT
ÜBERPRÜFEN 0.1
TMMa-045 ENGINE OIL AND PRESSURE CHECK HUILE MOTEUR ET PRESSION VERIFIER MOTORÖL UND DRUCK ÜBERPRÜFEN 0.5
TMMa-050 INJECTION NOZZLE CHECK INJECTEUR VERIFIER EINSPRITZDÜSE ÜBERPRÜFEN 5.5
TMMa-060 AIR CLEANER ASSY. CLEAN ENS. FILTRE A AIR NETTOYER LUFTFILTEREINHEIT REINIGEN 0.3
TMMa-064 SEDIMENTER CLEAN CUVETTE A SEDIMENTATION NETTOYER ABSCHEIDER REINIGEN 0.2
TMMa-065 FUEL TANK CLEAN RESERVOIR A CARBURANT NETTOYER KRAFTSTOFFTANK REINIGEN 3.1
TMMa-067 RADIATOR CLEAN RADIATEUR NETTOYER KÜHLER REINIGEN 2.6
KiSC issued 06, 2007 A
15. 2
[TMMb] MAINTENANCE SERVICE (BODY)
[TMMb] ENTRETIEN (CORPS)
[TMMb] WARTUNGSARBEITEN (KAROSSERIE)
JOB
CODE NO.
REF.DE
LA TACHE
ARBEITS-
CODENR
DESCRIPTION DESCRIPTION BESCHREIBUNG
STANDARD OPERATION TIME
(IN HR.)
HEURES DE MAIN-D'OEUVRE
STANDARD
NORMALEARBEITSZEIT (IN STD.)
M108S
REMARKS
REMARQUES
ANMER-
KUNGEN
TMMb-001
FRONT AXLE DIFFERENTIAL
CASE OIL
CHANGE
HUILE DE CARTER DE DIFFERENTIEL
DE PONT AVANT
CHANGER
VORDERRADACHSEN-
DIFFERENTIALGEHÄUSEÖL
WECHSELN 0.4
TMMb-004 TRANSMISSION OIL CHANGE HUILE DE TRANSMISSION CHANGER GETRIEBEÖL WECHSELN 0.8
TMMb-008
POWER STEERING HIGH
PRESSURE HOSE, ALL
CHANGE
TUYAU DE HAUTE PRESSION DE
DIRECTION ASSISTEE, TOUS
CHANGER
HSERVOLENKUNGS-
HOCHDRUCKSCHLAUCH, ALLE
WECHSELN 0.4
TMMb-010 BRAKE OIL CHANGE HUILE DE FREIN CHANGER BREMSFLÜSSIGKEIT WECHSELN 0.6
TMMb-011 BRAKE OIL HOSE, ALL CHANGE BOYAU DE FREIN, TOUS CHANGER BREMSEÖLSCHLAUCH, ALLE WECHSELN 0.6
TMMb-014
FRONT WHEEL CASE OIL, ONE
SIDE
CHANGE
HUILE DE CARTER DE ROUE AVANT, UN
COTE
CHANGER VORDERRADGEHÄUSEÖL, EINE SEITE WECHSELN 0.4
TMMb-015
FRONT WHEEL CASE OIL, BOTH
SIDES
CHANGE
HUILE DE CARTER DE ROUE AVANT,
DEUX COTES
CHANGER
VORDERRADGEHÄUSEÖL, BEIDE
SEITEN
WECHSELN 0.6
TMMb-016 GREASE NIPPLE, ALL CHANGE GRAISSAGE, TOUS LES RACCORDS CHANGER SCHMIERNIPPEL ABSCHMIEREN, ALLE WECHSELN 0.3
TMMb-022
TRANSMISSION OIL FILTER
CARTRIDGE, ALL
CHANGE
CARTOUCHE DU FILTRE D'HUILE DE
TRANSMISSION, TOUS
CHANGER GETRIEBEÖLFILTERPATRONE, ALLE WECHSELN 0.7
TMMb-024 BRAKE MASTER CYLINDER KIT CHANGE KIT DE MAITRE-CYLINDRE DE FREIN CHANGER BREMSEDRUCKZYLINDER-GRUPPE WECHSELN 1.3
TMMb-025 BRAKE EQUALIZER KIT CHANGE KIT D'EGALISEUR DE FREIN CHANGER BREMSEAUSGLEICHER-GRUPPE WECHSELN 0.4
TMMb-029 CUSHION RUBBER CHECK GOUVERNAIL DE COUSSIN VERIFIER KISSEN GUMMI ÜBERPRÜFEN 0.5
TMMb-030 TOE-IN
CHECK,
ADJUST
PINCEMENT
VERIFIER,
REGLER
VORSPUR
ÜBERPRÜFEN,
EINSTELLEN
0.3
TMMb-031 FRONT AXLE ROCKING FORCE
CHECK,
ADJUST
FORCE D'OSCILLATION DE L'ESSIEU
AVANT
VERIFIER,
REGLER
VORDERACHSEN-
VERRIEGELUNGSKRAFT
ÜBERPRÜFEN,
EINSTELLEN
0.3
TMMb-032 TIRE PRESSURE
CHECK,
ADJUST
PRESSION DE PNEUS
VERIFIER,
REGLER
REIFENDRUCK
ÜBERPRÜFEN,
EINSTELLEN
0.2
TMMb-035 PTO CLUTCH LEVER FREE PLAY
CHECK,
ADJUST
JEU DE LA LEVIER D'EMBRAYAGE DE
PRISE DE FORCE
VERIFIER,
REGLER
SPIEL DES
ZAPFWELLENANTRIEBSHEBELS
ÜBERPRÜFEN,
EINSTELLEN
0.4
TMMb-036 BRAKE PEDAL FREE PLAY
CHECK,
ADJUST
GARDE A LA PEDALE DE FREIN
VERIFIER,
REGLER
FREIES SPIEL DES BREMSPEDALS
ÜBERPRÜFEN,
EINSTELLEN
0.2
TMMb-037 PARKING BRAKE
CHECK,
ADJUST
FREIN DE STATIONNEMENT
VERIFIER,
REGLER
HANDBREMSE
ÜBERPRÜFEN,
EINSTELLEN
0.2
TMMb-044 SAFETY SWITCH, ALL
CHECK,
ADJUST
INTERRUPTEUR DE SECURITE, TOUT
VERIFIER,
REGLER
SICHERHEITSSCHALTER, ALLE
ÜBERPRÜFEN,
EINSTELLEN
0.5
TMMb-059 V-BELT (AIR CONDITIONER)
CHECK,
ADJUST
COURROIE (AIR CLIMATISE)
VERIFIER,
REGLER
KEILRIEMEN (KLIMAANLAGE)
ÜBERPRÜFEN,
EINSTELLEN
0.3
TMMb-062 RADIATOR NET CLEAN ECRAN DE RADIATEUR NETTOYER KÜHLERNETZ REINIGEN 0.1
KiSC issued 06, 2007 A
16. 3
[TMMn] WASH, CLEAN, PAINT
[TMMn] LAVAGE, NETTOYAGE, PEINTURE
[TMMn] WASCHEN, REINIGEN, ANSTREICHEN
JOB
CODE NO.
REF.DE
LA TACHE
ARBEITS-
CODENR
DESCRIPTION DESCRIPTION BESCHREIBUNG
STANDARD OPERATION TIME
(IN HR.)
HEURES DE MAIN-D'OEUVRE
STANDARD
NORMALEARBEITSZEIT (IN STD.)
M108S
REMARKS
REMARQUES
ANMER-
KUNGEN
TMMn-001
ENGINE-WASH AND CLEAN FOR
SERVICING
MOTEUR-LAVER ET NETTOYER POUR
ENTRETIEN
MOTOR-WASCHEN UND REINIGEN FÜR
WARTUNGSARBEITEN
1.0
TMMn-002 ENGINE-PAINT ONLY MOTEUR-PEINDRE SEULEMENT MOTOR-NUR LACKIEREN 1.2
TMMn-003
ENGINE-WASH, CLEAN AND
PAINT
MOTEUR-LAVER, NETTOYER, PEINDRE
MOTOR-WASCHEN, REINIGEN UND
ANSTREICHEN
2.0
TMMn-070
CABIN ASSEMBLY-CLEAN FOR
SERVICING
ENS. CABINE-NETTOYER POUR
ENTRETIEN
KABINE-REINGEN FÜR
WARTUNGSARBEITEN
1.8
TMMn-071
CABIN ASSEMBLY-WASH, CLEAN
AND PAINT
ENS. CABINE-LAVER, NETTOYER ET
PEINDRE
KABINE-WASCHEN, REINIGEN UND
ANSTREICHEN
5.0
TMMn-072
CABIN ASSEMBLY-CLEAN AND
PAINT
ENS. CABINE-NETTOYER ET PEINDRE KABINE-REINIGEN UND ANSTREICHEN 4.0
TMMn-073 CABIN ASSEMBLY-PAINT ONLY ENS. CABINE-PEINDRE SEULEMENT KABINE-NUR LACKIEREN 2.0
KiSC issued 06, 2007 A
17. 4
[TMMp] DIAGNOSIS GROUP, ENGINE
[TMMp] GROUPE DIAGNOSTIC, MOTEUR
[TMMp] DIAGNOSEGRUPPE, MOTOR
JOB
CODE NO.
REF.DE
LA TACHE
ARBEITS-
CODENR
DESCRIPTION DESCRIPTION BESCHREIBUNG
STANDARD OPERATION TIME
(IN HR.)
HEURES DE MAIN-D'OEUVRE
STANDARD
NORMALEARBEITSZEIT (IN STD.)
M108S
REMARKS
REMARQUES
ANMER-
KUNGEN
TMMp-001
COMMON RAIL SYSTEM,
CHECKER
TEST
SYSTEME A RAIL COMMUN,
CONTROLEUR
TEST
NORMALES SCHIENENSYSTEM,
PRÜFER
PRÜUFUNG 0.1
KiSC issued 06, 2007 A
18. 5
[TMMs] DIAGNOSIS GROUP, ELECTRICAL AND HYDRAULICS
[TMMs] GROUPE DIAGNOSTIC, EQUIPEMENTS ELECTRIQUES ET HYDRAULIQUES
[TMMs] DIAGNOSEGRUPPE, ELEKTRIK UND HYDRAULIK
JOB
CODE NO.
REF.DE
LA TACHE
ARBEITS-
CODENR
DESCRIPTION DESCRIPTION BESCHREIBUNG
STANDARD OPERATION TIME
(IN HR.)
HEURES DE MAIN-D'OEUVRE
STANDARD
NORMALEARBEITSZEIT (IN STD.)
M108S
REMARKS
REMARQUES
ANMER-
KUNGEN
TMMs-001
HYDRAULIC PUMP, THREEPOINT
HITCH, FLOW METER
TEST
POMPE HYDRAULIQUE, ATTELAGE
TROIS POINTS, DÉBITMÈTRE
TEST
HYDRAULIKPUMPE, DREIPUNKT-
ANHÄNGERKUPPLUNG,
STRÖMUNGSMESSER
PRÜUFUNG 1.8
TMMs-005
HYDRAULIC PUMP, POWER
STEERING, FLOW METER
TEST
POMPE HYDRAULIQUE, DIRECTION
ASSISTÉE, DÉBITMÈTRE
TEST
HYDRAULIKPUMPE, SERVOLENKUNG,
STRÖMUNGSMESSER
PRÜUFUNG 2.2
TMMs-020
MAIN RELIEF VALVE, PRESSURE
TESTER
TEST
DÉTENDEUR DE PRESSION PRINCIPAL,
TESTEUR DE PRESSION
TEST
HAUPT-ÜBERDRUCKVENTIL,
DRUCKPRÜFGERÄT
PRÜUFUNG 0.1
TMMs-025
POWER STEERING CONTROL
RELIEF VALVE, PRESSURE
TESTER
TEST
DIRECTION ASSISTÉE, CLAPET DE
DÉCHARGE DE RÉGULATION, TESTEUR
DE PRESSION
TEST
SERVOLENKUNGS-REGELVENTIL,
DRUCKPRÜFGERÄT
PRÜUFUNG 0.2
TMMs-030
PTO RELIEF VALVE, PRESSURE
TESTER
TEST
CLAPET DE DÉCHARGE DE PTO,
TESTEUR DE PRESSION
TEST
ZAPFWELLEN-ABLASSVENTIL,
DRUCKPRÜFGERÄT
PRÜUFUNG 1.0
TMMs-040 HI-LO VALVE, PRESSURE TESTER TEST
SOUPAPE TOUT OU PEU, TESTEUR DE
PRESSION
TEST HI/LO-VENTIL, DRUCKPRÜFGERÄT PRÜUFUNG 4.0
TMMs-050
SHUTTLE CLUTCH VALVE,
PRESSURE TESTER
TEST
VALVE D'EMBRAYAGE DE BASCULEUR,
TESTEUR DE PRESSION
TEST
KUPPLUNGS-ABSPERRVENTIL,
DRUCKPRÜFGERÄT
PRÜUFUNG 1.1
TMMs-070 4WD, PRESSURE TESTER TEST 4RM, TESTEUR DE PRESSION TEST ALLRADANTRIEB, DRUCKPRÜFGERÄT PRÜUFUNG 4.0
KiSC issued 06, 2007 A
19. 6
[TMMz] DIAGNOSIS GROUP, OTHERS
[TMMz] GROUPE DIAGNOSTIC, AUTRES
[TMMz] DIAGNOSEGRUPPE, ANDERE
JOB
CODE NO.
REF.DE
LA TACHE
ARBEITS-
CODENR
DESCRIPTION DESCRIPTION BESCHREIBUNG
STANDARD OPERATION TIME
(IN HR.)
HEURES DE MAIN-D'OEUVRE
STANDARD
NORMALEARBEITSZEIT (IN STD.)
M108S
REMARKS
REMARQUES
ANMER-
KUNGEN
TMMz-001
NORMAL OPERATING GAS
PRESSURE, MANIFOLD GAUGE
TEST
PRESSION DE SERVICE NORMALE DES
GAZ, JAUGE DE COLLECTEUR
TEST
NORMALER BETRIEBGASDRUCK,
ROHRDICKE
PRÜUFUNG 0.1
KiSC issued 06, 2007 A
20. 7
[TMAa] BONNET, COVER GROUP
[TMAa] GROUPE CAPOT ET COUVERCLE
[TMAa] HAUBEN, DECKELGRUPPE
KiSC issued 06, 2007 A
21. 8
JOB
CODE NO.
REF.DE
LA TACHE
ARBEITS-
CODENR
DESCRIPTION DESCRIPTION BESCHREIBUNG
STANDARD OPERATION TIME
(IN HR.)
HEURES DE MAIN-D'OEUVRE
STANDARD
NORMALEARBEITSZEIT (IN STD.)
M108S
REMARKS
REMARQUES
ANMER-
KUNGEN
TMAa-002 BONNET ASSY. R & R ENS. CAPOT D & R MOTORHAUBENEINHEIT A & E 0.3
TMAa-003 BONNET ASSY. O.H. ENS. CAPOT REVISER MOTORHAUBENEINHEIT ÜBERHOLUNG 1.5
TMAa-008 FRONT GRILLE R & R CALANDRE AVANT D & R FRONT-KÜHLERGRILL A & E 0.2
TMAa-009 BONNET STAY (SUPPORT) R & R SUPPORT DE CAPOT D & R MOTORHAUBENSTREBE (STÜTZE) A & E 0.5
TMAa-013 SIDE COVER, L.H. R & R COUVERCLE, GAUCHE D & R SEITENDECKEL, LINKS A & E 0.1
TMAa-014 SIDE COVER, R.H. R & R COUVERCLE, DROIT D & R SEITENDECKEL, RECHTS A & E 0.1
TMAa-023 STEERING HANDLE COVER R & R
COUVERCLE DE VOLANT DE
DIRECTION
D & R LENKGRIFF-ABDECKUNG A & E 0.2
TMAa-030 GRILLE SUPPORT R & R SUPPORT DE CALANDRE D & R KÜHLERGRILLHALTERUNG A & E 0.7
TMAa-035 REAR BONNET COMP. R & R ENS. CAPOT ARRIERE D & R HINTERE HAUBENEINHEIT A & E 0.4
TMAa-062 BONNET SUPPORT R & R SUPPORT DE CAPOT D & R MOTORHAUBENSTÜTZE A & E 1.6
TMAa-086 BATTERY SUPPORT R & R SUPPORT DE BATTERIE D & R BATTERIESTÜTZE A & E 1.5
TMAa-102 DAMPER R & R AMORTISSEUR D & R DÄMPFER A & E 0.2
KiSC issued 06, 2007 A
22. 9
[TMAb] STEP, HOUSING COVER GROUP
[TMAb] GROUPE MARCHEPIED ET COUVERCLE DE CARTER D'EMBRAYAGE
[TMAb] SCHRITT, GEHÄUSEDECKELGRUPPE
KiSC issued 06, 2007 A
23. 10
JOB
CODE NO.
REF.DE
LA TACHE
ARBEITS-
CODENR
DESCRIPTION DESCRIPTION BESCHREIBUNG
STANDARD OPERATION TIME
(IN HR.)
HEURES DE MAIN-D'OEUVRE
STANDARD
NORMALEARBEITSZEIT (IN STD.)
M108S
REMARKS
REMARQUES
ANMER-
KUNGEN
TMAb-003 FRONT BRACKET, L.H. R & R SUPPORT AVANT, GAUCHE D & R VORDERTRAGACHSE, LINKS A & E 2.2
TMAb-004 REAR BRACKET, L.H. R & R SUPPORT ARRIERE, GAUCHE D & R HINTERTRAGACHSE, LINKS A & E 1.4
TMAb-008 FRONT BRACKET, R.H. R & R SUPPORT AVANT, DROIT D & R VORDERTRAGACHSE, RECHTS A & E 2.2
TMAb-009 REAR BRACKET, R.H. R & R SUPPORT ARRIERE, DROIT D & R HINTERTRAGACHSE, RECHTS A & E 1.4
TMAb-019 STEP, AUXILIARY, L.H. R & R MARCHE, AUXILIAIRE, GAUCHE D & R STUFE, ZUSATZ, LINKS A & E 0.1
TMAb-020 STEP, AUXILIARY, R.H. R & R MARCHE, AUXILIAIRE, DROIT D & R STUFE, ZUSATZ, RECHTS A & E 0.1
TMAb-040 STEP RUBBER R & R CAOUTCHOUC DE REVETEMENT D & R STUFENGUMMI A & E 0.1
TMAb-070 PLATE 1 R & R PLAQUE 1 D & R PLATTE 1 A & E 0.5
TMAb-071 PLATE 2 R & R PLAQUE 2 D & R PLATTE 2 A & E 0.8
TMAb-080 CUSHION RUBBER R & R CAOUTCHOUC AMORTISSEUR D & R KISSENGUMMI A & E 1.3
TMAb-081 CUSHION RUBBER, ALL R & R CAOUTCHOUC AMORTISSEUR, TOUT D & R KISSENGUMMI, ALLE A & E 1.8
KiSC issued 06, 2007 A
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. 11
[TMAc] FENDER, FLOOR, SEAT GROUP
[TMAc] GROUPE AILE, PLANCHER ET SIEGE
[TMAc] FENDER, BODEN, SITZGRUPPE
KiSC issued 06, 2007 A
26. 12
JOB
CODE NO.
REF.DE
LA TACHE
ARBEITS-
CODENR
DESCRIPTION DESCRIPTION BESCHREIBUNG
STANDARD OPERATION TIME
(IN HR.)
HEURES DE MAIN-D'OEUVRE
STANDARD
NORMALEARBEITSZEIT (IN STD.)
M108S
REMARKS
REMARQUES
ANMER-
KUNGEN
TMAc-002 FENDER ASSY., L.H. R & R ENS. D'AILE, GAUCHE D & R KOTFLÜGELEINHEIT, LINKS A & E 1.0
TMAc-006 FENDER ASSY., R.H. R & R ENS. D'AILE, DROIT D & R KOTFLÜGELEINHEIT, RECHTS A & E 1.0
TMAc-030 SEAT FRAME R & R CADRE DE SIEGE D & R SITZRAHMEN A & E 0.6
TMAc-032 SEAT ASSY. R & R ENS. SIEGE D & R SITZEINHEIT A & E 0.5
TMAc-052 TOOL BOX R & R BOITE A OUTILS D & R WERKZEUGKASTEN A & E 0.1
TMAc-060 FENDER COVER, L.H. R & R COUVERCLE D'AILE, GAUCHE D & R KOTFLÜGELDECKEL, LINKS A & E 0.1
TMAc-061 FENDER COVER, R.H. R & R COUVERCLE D'AILE, DROIT D & R KOTFLÜGELDECKEL, RECHTS A & E 0.1
KiSC issued 06, 2007 A