dcn lab 4

1. Seneca DCN330 – Fall 2017
Report for Lab 4
Name: Student ID: Date:
Complete the following questions and highlight your answer. Attach the screenshots when asked.
Part 1 View the Default VLAN Configuration
Step 2
Question
What benefit will configuring VLANs provide to the current configuration?
Part 2 Configure VLANs
Step 2
Question
Which command will only display the VLAN name, status, and associated ports on a switch? (NOTE:
Show your results after executing that IOS command with CLI on S1 by inserting your screenshot below.)
Step 3/4
Question
Show the VLAN configuration on S2 and S3. (NOTE: Insert two screenshots showing the VLAN
configurations on CLI of S2 and S3, respectively.)
Part 3 Assign VLANs to Ports
Step 1/2
Question
Assign the VLANs to the following ports on S2 and S3:
VLAN 10: Fast Ethernet 0/11
VLAN 20: Fast Ethernet 0/18
VLAN 30: Fast Ethernet 0/6
Use a command to show the results of the assignments on S2 and S3 respectively and insert the two
screenshots below.
Step 3
Question
Previously, PCs that shared the same network could ping each other successfully. Try pinging between PC1
and PC4. Although the access ports are assigned to the appropriate VLANs, were the pings successful?
Why? (use one sentence to answer this question.)
What could be done to resolve this issue? (use one sentence to answer this question.)
Insert one screenshot to show what changes (configurations) you made to make PCs share the same
network can ping each other.
Finish the Packet Tracer Activity.
Insert only one screenshot below to show the result of:
• PC1 ping PC4
• PC2 ping PC5
• PC3 ping PC6