Our Acome cable tools
C0007A Preparation tool for HPL 50-1/2 inch SF
C0008A Preparation tool for HPL 50-1/2 inch F
C0009A Saw guide for HPL 50-7/8 inch F
C0010A Saw guide for HPL 50-1 1/4 inch F
C0011A Saw guide for HPL 50-1 5/8 inch F
1. SPECIFICATION TECHNIQUE
Data Sheet
Outil de préparation câble/Preparation tool for : HPL 50-1-5/8"F
AST-668
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A0 - 22 / 11 / 2000
DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome.fr
1. REFERENCE : C0011A Code fabricant / Manufacturer code : 22 395 183
2. DIMENSIONS (mm)
30,0
52,50
65,00
3. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Matière et protection du corps : Acier dur zingué chromaté
/ Material and finish : Chromated galvanized hard steel
Matière et protection des vis de blocage : Thermoplastique et acier
/ Material and finish of screws : Thermoplastic and steel
• Retour sommaire / Back to content • ANM-308
2. SPECIFICATION TECHNIQUE
Data Sheet
Outil préparation câble / Preparation tool for : HPL 50 - 1-1/4"F
AST-667
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition : A0 25 / 10 / 2000
DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome.fr
1. REFERENCE / C0010A Code fabricant / Manufacturer code : 22 395 182
2. DIMENSIONS (mm)
28,00
40,50
50,00
3 CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Matière et protection du corps : Acier dur zingué chromaté
/ Material and finish of the body : Chomated galvanized hard steel
Matière et protection des vis de blocage : Thermoplastique et acier
/ Material and finish of screws : Thermoplastic and steel
• Retour sommaire / Back to content • ANM-359
3. SPECIFICATION TECHNIQUE
Data Sheet
Outil de préparation câble / Preparation tool for : HPL 50-7/8"F
AST-666
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A - 22 / 11 / 2000
DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome.fr
1. REFERENCE : C0009A Code fabricant / Manufacturer code: 22 395 187
2. DIMENSION (mm)
21,00
31,00
40,00
3. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Matière et protection du corps : Acier dur zingué chromaté
/ Material and finish of the body : Chomated galvanized hard steel
Matière et protection des vis de blocage : Thermoplastique et acier
/ Material and finish of screws : Thermoplastic and steel
• Retour sommaire / Back to content • ANM-265
4. SPECIFICATION TECHNIQUE
Data Sheet
Outil de préparation câble / Preparation tool for : HPL 50-1/2"F
AST-381
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A - 22 / 11 / 2000
DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome.fr
1 REFERENCE : C0008A Code fabricant / Manufacturer code : 22 395 125
2 DIMENSION (mm)
Accessoires / Accessories
3 CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Matière et protection de la poignée : Aluminium anodisé noir
/ Material and finish of the handle : Black anodized aluminium
Matière et protection du manchon : Aluminium
/ Material and finish of the sleeve : Aluminium
Matière et protection de l'outil fraise : Acier dur traité thermiquement
/ Material and finish of the mill tool : Hard steel (heat treated)
Accessoires / Accessories : 1 clé mâle hex. de 2/plats (réf. D 395-208)
: 2mm (across flats) male hex. key (ref. D 395-208)
: 1 clé mâle hex. de 3/plats (réf. D 395-311)
: 3mm (across flats) male hex. key (ref. D 395-311)
4 PREPARATION DU CABLE / Cable preparation.
Gaine / Jacket
Conducteur extérieur / Outer conductor
Conducteur intérieur
Inner Conductor
5 ELEMENT TECHNIQUE / Technical data.
Notice de montage / Assembling instructions : ANM-264
• Retour sommaire / Back to content • ANM-264
5. SPECIFICATION TECHNIQUE
Data Sheet
Outil de préparation câble/Preparation tool for : HPL 50 1/2"SF
AST-665
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A0 - 22 / 11 / 2000
DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome.fr
1. REFERENCE : C0007A Code fabricant / Manufacturer code : 22 395 112
2. DIMENSION (mm)
Accessoires / Accessories
3. CARACTERISTIQUES MECANIQUES / Mechanical characteristic.
Matière et protection de la poignée : Aluminium anodisé noir
/ Material and finish of the handle : Black anodized aluminium
Matière et protection du manchon : Aluminium
/ Material and finish of the sleeve : Aluminium
Matière et protection de l'outil fraise : Acier dur traité thermiquement
/ Material and finish of the mill tool : Hard steel (heat treated)
Accessoires / Accessories : 1 clé mâle hex. de 2/plats (réf. D 395-208)
: 2mm (across flats) male hex. key (ref. D 395-208)
4. PREPARATION DU CABLE / Cable preparation.
9.0
12.
Gaine / Jacket
Conducteur extérieur / Outer conductor
Conducteur intérieur
Inner Conductor
5. ELEMENT TECHNIQUE / Technical data.
Notice de montage / Assembly instructions : ANM-263
• Retour sommaire/ Back to content • ANM-263