Acome connector data sheets
C0001A 7/16 female for HPL 50-1/2 inch F cable
C0002A 7/16 female for HPL 50-7/8 inch F cable
C0003A 7/16 female for HPL 50-1 1/4 inch F cable
C0004A 7/16 female for HPL 50-1 5/8 inch F cable
C0005A 7/16 male for HPL 50-1/2 inch SF cable
C0006A 7/16 male for HPL 50-1/2 inch F cable
C0031A 7/16 male 90 deg. for HPL 50-1/2 inch SF cable
C0032A 7/16 female for HPL 50-1/2 inch SF cable
C0042A N male for HPL 50-1/2 inch SF cable
C0043A N male 90 deg. for HPL 50-1/2 inch SF cable
C0044A N female for HPL 50-1/2 inch SF cable
C0050A 7/16 male 90 deg. for HPL 50-1/2 F cable
C0055A 7/16 male for HPL 50-7/8 inch F cable
C0059A N female for HPL 50-1/2 inch F cable
C0061A N male for HPL 50-1/2 inch F cable
C0069A N female for HPL 50-7/8 inch F cable
C0070A N male for HPL 50-7/8 inch F cable
Acome connector data sheets - Acome liitinesitteet
1. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur N mâle à presse étoupe pour câble HPL 50-7/8F
N male connector for corrugated 7/8F cable
AST-713
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 – 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0070A Code fabricant / Manufacturer code : 08 250 130
2. DIMENSIONS (mm)
30 / plats
30 / flats
20 / plats
20 / flats
36 / plats
36 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Characteristic impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 5 x 10³³³³ M ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 1 m ΩΩΩΩ
- Contact extérieur / Outer contact : ≤≤≤≤ 0.2 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 1500 V eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 1000 V eff / 50 Hz
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : N mâle conforme à la norme NF C 93-566
: N male in compliance with NF C 93-566 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver plated brass
Matière et protection de l'écrou de P.E. et d'accouplement : LAITON nickelé
/ Material and finish of the clamping and coupling nut : Nickel plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : LAITON doré & BRONZE argenté
/ Material and finish of the inner contact : Gold plated brass & Silver plated bronze
Etanchéité à l'accouplement / Coupling waterproofing : Joint plat en SILICONE / Silicone gasket
Etanchéité du presse-étoupe / Clamping nut waterproofing : Joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 0,7 N.m à 1,1 N.m
Température d'utilisation / Operating temperature range : - 40 °C <<<< θθθθ <<<< + 65 °C
Poids / Weight : 255 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-265
• Retour sommaire / Bak to content • ANM-265
2. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur N femelle à presse étoupe pour câble HPL 50-7/8F
N female connector for corrugated 7/8F cable
AST-715
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 – 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0069A Code fabricant / Manufacturer code : 08 250 137
2. DIMENSIONS (mm)
13.5 / plats
13.5 / flats
36 / plats
36 / flats
30 / plats
30 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Characteristic impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 5 x 10³³³³ M ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 1 m ΩΩΩΩ
- Contact extérieur / Outer contact : ≤≤≤≤ 0.2 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 1500 V eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 1000 V eff / 50 Hz
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : N femelle conforme à la norme NF C 93-566
: N female in compliance with NF C 93-566 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver plated brass
Matière et protection de l'écrou de P.E. : LAITON nickelé
/ Material and finish of the clamping nut : Nickel plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE doré & argenté
/ Material and finish of the inner contact : Gold plated & Silver plated bronze
Etanchéité du presse-étoupe / Clamping nut waterproofing : Joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 0,7 N.m à 1,1 N.m
Température d'utilisation / Operating temperature range : - 40 °C <<<< θθθθ <<<< + 65 °C
Poids / Weight : 250 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-265
• Retour sommaire / Bak to content • ANM-265
3. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur N mâle à presse étoupe pour câble HPL 50-1/2F
N male connector for corrugated 1/2F cable
AST-709
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 – 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0061A Code fabricant / Manufacturer code : 08 250 129
2. DIMENSIONS (mm)
25 / plats
25 / flats
20 / plats
20 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Characteristic impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 5 x 10³³³³ M ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 1 m ΩΩΩΩ
- Contact extérieur / Outer contact : ≤≤≤≤ 0.2 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 1500 V eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 1000 V eff / 50 Hz
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : N mâle conforme à la norme NF C 93-566
: N male in compliance with NF C 93-566 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver plated brass
Matière et protection de l'écrou de P.E. et d'accouplement : LAITON nickelé
/ Material and finish of the clamping and coupling nut : Nickel plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE doré
/ Material and finish of the inner contact : Gold plated bronze
Etanchéité à l'accouplement / Coupling waterproofing : Joint plat en SILICONE / Silicone gasket
Etanchéité du presse-étoupe / Clamping nut waterproofing : Joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 0,7 N.m à 1,1 N.m
Température d'utilisation / Operating temperature range : - 40 °C <<<< θθθθ <<<< + 65 °C
Poids / Weight : 149 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-264
• Retour sommaire / Bak to content • ANM-264
4. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur N femelle à presse étoupe pour câble HPL 50-1/2F
N female connector for corrugated 1/2F cable
AST-714
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 – 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0059A Code fabricant / Manufacturer code : 08 250 136
2. DIMENSIONS (mm)
25 / plats
25 / flats
13.5 / plats
13.5 / flats
25 / plats
25 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Characteristic impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 5 x 10³³³³ M ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 1 m ΩΩΩΩ
- Contact extérieur / Outer contact : ≤≤≤≤ 0.2 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 1500 V eff / 50 Hz
Tension de service (au sol) / Working voltage (at sea level) : 1000 V eff / 50 Hz
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : N femelle conforme à la norme NF C 93-566
: N female in compliance with NF C 93-566 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver plated brass
Matière et protection de l'écrou de P.E. : LAITON nickelé
/ Material and finish of the clamping nut : Nickel plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE doré
/ Material and finish of the inner contact : Gold plated bronze
Etanchéité du presse-étoupe / Clamping nut waterproofing : Joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 0,7 N.m à 1,1 N.m
Température d'utilisation / Operating temperature range : - 40 °C <<<< θθθθ <<<< + 65 °C
Poids / Weight : 140 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-264
• Retour sommaire / Bak to content • ANM-264
5. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur 7/16 mâle à presse étoupe pour câble HPL 50-7/8F
7/16 male connector for corrugated 7/8F cable
AST-705
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 – 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0055A Code fabricant / Manufacturer code : 08 100 005
2. DIMENSIONS (mm)
36 / plats
36 / flats
30 / plats
30 / flats
32 / plats
32 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Characteristic Impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 10 G ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 0.8 m ΩΩΩΩ
- Contact extérieur / Outer contact : 1.5 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 3 kV eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 2.7 kV eff / 50 Hz
Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec
2 porteuses à 20 W, F ≤ 1880 MHz : ≤≤≤≤ - 153 dBc
/ 3rd
order intermodulation product measured in swept frequency mode with 2 x 20 W carriers, F ≤ 1880 MHz
TETRA
(380-470 MHz)
GSM 900
(890-960 MHz)
GSM 1800
(1710-1880 MHz)
UMTS
(1920-2170 MHz)
2.2 to 3 GHz
Adaptation / return loss - 32 dB - 32 dB - 30 dB - 30 dB - 26 dB
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : 7/16 mâle conforme à la norme DIN 47.223
: 7/16 male in compliance with DIN 47.223 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver plated brass
Matière et protection de l'écrou de P.E. : LAITON nickelé
/ Material and finish of the clamping nut : Nickel plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE argenté
/ Material and finish of the inner contact : Silver plated bronze
Etanchéité du presse-étoupe / Clamping nut waterproofing : Joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque :25 N.m maxi.
Température d'utilisation / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° C
Poids / Weight : 305 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-265
• Retour sommaire / Back to content • ANM-265
6. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur 7/16 mâle 90° à presse étoupe pour câble HPL 50-1/2F
90° 7/16 male connector for corrugated 1/2F cable
AST-707
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 – 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0050A Code fabricant / Manufacturer code : 08 100 007
2. DIMENSIONS (mm)
25 / plats
25 / flats
32 / plats
32 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Characteristic Impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 10 G ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 0.8 m ΩΩΩΩ
- Contact extérieur / Outer contact : 1.5 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 3 kV eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 2.7 kV eff / 50 Hz
Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec
2 porteuses à 20 W, F ≤ 1880 MHz : ≤≤≤≤ - 153 dBc
/ 3rd
order intermodulation product measured in swept frequency mode with 2 x 20 W carriers, F ≤ 1880 MHz
TETRA
(380-470 MHz)
GSM 900
(890-960 MHz)
GSM 1800
(1710-1880 MHz)
UMTS
(1920-2170 MHz)
2.2 to 3 GHz
Adaptation / return loss - 32 dB - 32 dB - 30 dB - 30 dB - 26 dB
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : 7/16 mâle conforme à la norme DIN 47.223
: 7/16 male in compliance with DIN 47.223 standard
Matière et protection du corps : LAITON bronze ternaire
/ Material and finish of the body : Ternary bronze plated brass
Matière et protection de l'écrou de P.E. : LAITON nickelé
/ Material and finish of the clamping nut : Nickel plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : LAITON & BRONZE argentés
/ Material and finish of the inner contact : Silver plated brass & bronze
Etanchéité à l'accoplement / Coupling watreproofing : Joint torique en SILICONE / Silicone O-ring
Etanchéité du presse-étoupe / Clamping nut waterproofing : Joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque :25 N.m maxi.
Température d'utilisation / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° C
Poids / Weight : 290 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-264
• Retour sommaire / back to content • ANM-264
7. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur N femelle à presse étoupe pour câble HPL 50-1/2SF
N female connector for corrugated 1/2SF cable
AST-711
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 – 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0044A Code fabricant / Manufacturer code : 08 250 134
2. DIMENSIONS (mm)
20 /plats
20 / flats
19 /plats
19 / flats
13.5 /plats
13,5 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Characteristic impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 5 x 10³³³³ M ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 1 m ΩΩΩΩ
- Contact extérieur / Outer contact : ≤≤≤≤ 0.2 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 1500 V eff / 50 Hz
Tension de service (au sol) / Working voltage (at sea level) : 1000 V eff / 50 Hz
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : N femelle conforme à la norme NF C 93-566
: N female in compliance with NF C 93-566 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver plated brass
Matière et protection de l'écrou de P.E. : LAITON nickelé
/ Material and finish of the clamping nut : Nickel plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE doré
/ Material and finish of the inner contact : Gold plated bronze
Etanchéité du presse-étoupe / Clamping nut waterproofing : Joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 0,7 N.m à 1,1 N.m
Température d'utilisation / Operating temperature range : - 40 °C <<<< θθθθ <<<< + 65 °C
Poids / Weight : 99 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-263
• Retour sommaire / Bak to content • ANM-263
8. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur N à 90° mâle à presse étoupe pour câble HPL 50-1/2SF
90° N male connector for corrugated 1/2SF cable
AST-712
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 – 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0043A Code fabricant / Manufacturer code : 08 250 135
2. DIMENSIONS (mm)
20 /plats
20 / flats
19 /plats
19 / flats
20 /plats
20 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Characteristic impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 5 x 10³³³³ M ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 1 m ΩΩΩΩ
- Contact extérieur / Outer contact : ≤≤≤≤ 0.2 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 1500 V eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 1000 V eff / 50 Hz
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : N mâle conforme à la norme NF C 93-566
: N male in compliance with NF C 93-566 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver plated brass
Matière et protection de l'écrou de P.E. et d'accouplement : LAITON nickelé
/ Material and finish of the clamping and coupling nut : Nickel plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE doré
/ Material and finish of the inner contact : Gold plated bronze
Etanchéité à l'accouplement / Coupling waterproofing : Joint plat en SILICONE / Silicone gasket
Etanchéité du presse-étoupe / Clamping nut waterproofing : Joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 0,7 N.m à 1,1 N.m
Température d'utilisation / Operating temperature range : - 40 °C <<<< θθθθ <<<< + 65 °C
Poids / Weight : 176 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-263
• Retour sommaire / Bak to content • ANM-263
9. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur N mâle à presse étoupe pour câble HPL 50-1/2SF
N male connector for corrugated 1/2SF cable
AST-708
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 – 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0042A Code fabricant / Manufacturer code : 08 250 128
2. DIMENSIONS (mm)
20 /plats
20 / flats
19 /plats
19 / flats
20 /plats
20 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Characteristic impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 5 x 10³³³³ M ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 1 m ΩΩΩΩ
- Contact extérieur / Outer contact : ≤≤≤≤ 0.2 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 1500 V eff / 50 Hz
Tension de service (au sol) / Working voltage (at sea level) : 1000 V eff / 50 Hz
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : N mâle conforme à la norme NF C 93-566
: N male in compliance with NF C 93-566 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver plated brass
Matière et protection de l'écrou de P.E. et d'accouplement : LAITON nickelé
/ Material and finish of the clamping and coupling nut : Nickel plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE doré
/ Material and finish of the inner contact : Gold plated bronze
Etanchéité à l'accouplement / Coupling waterproofing : Joint plat en SILICONE / Silicone gasket
Etanchéité du presse-étoupe / Clamping nut waterproofing : Joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 0,7 N.m à 1,1 N.m
Température d'utilisation / Operating temperature range : - 40 °C <<<< θθθθ <<<< + 65 °C
Poids / Weight : 110 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-263
• Retour sommaire / Bak to content • ANM-263
10. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur 7/16 femelle à presse étoupe pour câble HPL 50-1/2SF
7/16 female connector for corrugated 1/2" Super Flexible cable
AST-706
Page: 1/1
RÈdigÈ par : J. GANON ApprouvÈ par : E. ROCHEFORT Edition du : A1 ñ 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0032A Code fabricant / Manufacturer code : 08 100 036
2. DIMENSIONS (mm)
20 /plats
20 / flats
19 /plats
19 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
ImpÈdance caractÈristique / Characteristic impedance : 50 ΩΩΩΩ ±±±± 2%
FrÈquence d'utilisation / Operating frequency range : DC - 3 GHz
RÈsistance d'isolement / Insulation resistance : ≥≥≥≥ 10 G ΩΩΩΩ
RÈsistance de contact / Contact resistance - Contact intÈrieur / Inner contact : ≤≤≤≤ 0.8 m ΩΩΩΩ
- Contact extÈrieur / Outer contact : 1.5 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 3 kV eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 2.7 kV eff / 50 Hz
Produit d'intermodulation d'ordre 3 mesurÈ en mode frÈquentiel balayÈ avec
2 porteuses ‡ 20 W, F ≤ 1880 MHz : ≤≤≤≤ - 153 dBc
/ 3rd
order intermodulation product measured in swept frequency mode with 2 x 20 W carrier, F ≤ 1880 MHz
TETRA
(380-470 MHz)
GSM 900
(890-960 MHz)
GSM 1800
(1710-1880 MHz)
UMTS
(1920-2170 MHz)
2.2 to 3 GHz
Adaptation / return loss - 32 dB - 32 dB - 30 dB - 30 dB - 26 dB
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : 7/16 femelle conforme à la norme DIN 47.223
: 7/16 female in compliance with DIN 47.223 standard
MatiËre et protection du corps : LAITON argenté
/ Material and finish of the body : Silver plated brass
MatiËre et protection de l'Ècrou de P.E. : LAITON nickelé
/ Material and finish of the clamping nut : Nickel plated brass
Isolant / Insulator : PTFE
MatiËre et protection du contact intÈrieur : BRONZE argenté
/ Material and finish of the inner contact : Silver plated bronze
EtanchÈitÈ du presse-Ètoupe / Clamping nut waterproofing : joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 25 N.m maxi.
TempÈrature d'utilisation / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° C
Poids / Weight : 130 g
Indice d'ÈtanchÈitÈ / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-263
• Retour sommaire / back to content • ANM-263
11. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur 7/16 mâle 90° à presse étoupe pour câble HPL 50-1/2 SF
90° 7/16 male connector for corrugated 1/2" Super flexible cable
AST-704
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 - 04 / 01 / 2001
• DIVISION RADIOVIDEOCOM - 52, Rue du Montparnasse - 75014 PARIS - France Tél +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome .fr
1. REFERENCE : C0031A Code fabricant / Manufacturer code : 08 100 004
2. DIMENSIONS (mm) :
20 / plats
20 / flats
19 / plats
19 / flats
32 / plats
32 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / charactéristic impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 10 G ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 0.8 m ΩΩΩΩ
- Contact extérieur / Outer contact : 1.5 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 3 kV eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 2.7 kV eff / 50 Hz
Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec
2 porteuses à 20 W, F ≤ 1880 MHz : ≤≤≤≤ - 153 dBc
/ 3rd
order intermodulation product measured in swept frequency mode with 2 x 20 W carriers, F ≤ 1880 MHz
TETRA
(380-470 MHz)
GSM 900
(890-960 MHz)
GSM 1800
(1710-1880 MHz)
UMTS
(1920-2170 MHz)
2.2 to 3 GHz
Adaptation / return loss - 32 dB - 32 dB - 30 dB - 30 dB - 26 dB
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : 7/16 mâle conforme à la norme DIN 47.223
: 7/16 male in compliance with DIN 47.223 standard
Matière et protection du corps : LAITON argenté & bronze ternaire
/ Material and finish of the body : Silver & ternary bronze plated brass
Matière et protection de l'écrou de P.E. et d'accouplement : LAITON nickelé
/ Material and finish of the clamping and coupling nut : Nickel-plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : LAITON argenté et BRONZE doré
/ Material and finish of the inner contact : Silver-plated brass & gold plated bronze
Etanchéité à l'accouplement / Coupling waterproofing : joint torique en SILICONE / Silicone O-ring
Etanchéité du presse-étoupe / Clamping nut waterproofing : joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 25 N.m maxi.
Température d'utilisation. / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° C
Poids / Weight : 259 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-263
• Retour sommaire / Back to content • ANM-263
12. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur 7/16 mâle à presse étoupe pour câble HPL 50-1/2F
7/16 male connector for corrugated 1/2" flexible cable
AST-677
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 - 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome.fr
1. REFERENCE : C0006A Code fabricant / Manufacturer code: 08 100 006
2. DIMENSIONS (mm)
Φ35.00
17.70
25 /plats
25 / flats
25 /plats
25 / flats
32 /plats
32 / flats
61.50
Φ28.00
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 10 G ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 0.8 m ΩΩΩΩ
- Contact extérieur / Outer contact : 1.5 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 3 kV eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 2.7 kV eff / 50 Hz
Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec
2 porteuses à 20 W, F ≤ 1880 MHz : ≤≤≤≤ - 153 dBc
/ 3rd
order intermodulation product measured in swept frequency mode with 2 x 20 W carriers, F ≤ 1880 MHz
TETRA
(380-470 MHz)
GSM 900
(890-960 MHz)
GSM 1800
(1710-1880 MHz)
UMTS
(1920-2170 MHz)
2.2 to 3 GHz
Adaptation / return loss - 32 dB - 32 dB - 30 dB - 30 dB - 26 dB
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : 7/16 mâle conforme à la norme DIN 47.223
: 7/16 male in compliance with DIN 47.223 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver-plated brass
Matière et protection de l'écrou de P.E. et d'accouplement : LAITON nickelé
/ Material and finish of the clamping and coupling nut : Nickel-plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE argenté
/ Material and finish of the inner contact : Silver-plated bronze
Etanchéité à l'accouplement / Coupling waterproofing : joint torique en SILICONE / Silicone O-ring
Etanchéité du presse-étoupe / Clamping nut waterproofing : joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 25 N.m maxi.
Température d'utilisation. / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° C
Poids / Weight : 183 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-264
• Retour sommaire • ANM-264
13. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur 7/16 mâle à presse étoupe pour câble HPL 50-1/2 SF
7/16 male connector for corrugated 1/2" Super flexible cable
AST-669
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 - 04 / 01 / 2001
• DIVISION RADIOVIDEOCOM - 52, Rue du Montparnasse - 75014 PARIS - France Tél +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome .fr
1. REFERENCE : C0005A Code fabricant / Manufacturer code : 08 100 003
2. DIMENSIONS (mm) :
Φ22.0016.50
Φ 35.0048.61
20 /plats
20 / flats
19 /plats
19 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 10 G ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 0.8 m ΩΩΩΩ
- Contact extérieur / Outer contact : 1.5 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 3 kV eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 2.7 kV eff / 50 Hz
Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec
2 porteuses à 20 W, F ≤ 1880 MHz : ≤≤≤≤ - 153 dBc
/ 3rd
order intermodulation product measured in swept frequency mode with 2 x 20 W carriers, F ≤ 1880 MHz
TETRA
(380-470 MHz)
GSM 900
(890-960 MHz)
GSM 1800
(1710-1880 MHz)
UMTS
(1920-2170 MHz)
2.2 to 3 GHz
Adaptation / return loss - 32 dB - 32 dB - 30 dB - 30 dB - 26 dB
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : 7/16 mâle conforme à la norme DIN 47.223
: 7/16 male in compliance with DIN 47.223 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver-plated brass
Matière et protection de l'écrou de P.E. et d'accouplement : LAITON nickelé
/ Material and finish of the clamping and coupling nut : Nickel-plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE argenté
/ Material and finish of the inner contact : Silver-plated bronze
Etanchéité à l'accouplement / Coupling waterproofing : joint torique en SILICONE / Silicone O-ring
Etanchéité du presse-étoupe / Clamping nut waterproofing : joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 25 N.m maxi.
Température d'utilisation. / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° C
Poids / Weight : 122 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-263
• Retour sommaire / Back to content • ANM-263
14. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur 7/16 femelle à presse étoupe pour câble HPL 50-1-5/8F
7/16 female connector for corrugated 1-5/8" flexible cable
AST-682
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 - 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome.fr
1. REFERENCE : C0004A Code fabricant / Manufacturer code : 08 100 020
2. DIMENSIONS (mm)
60 /plats
60 / flats
34 /plats
34 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 10 G ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 0.8 m ΩΩΩΩ
- Contact extérieur / Outer contact : 1.5 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 3 kV eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 2.7 kV eff / 50 Hz
Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec
2 porteuses à 20 W, F ≤ 1880 MHz : ≤≤≤≤ - 153 dBc
/ 3rd
order intermodulation product measured in swept frequency mode with 2 x 20 W carriers, F ≤ 1880 MHz
TETRA
(380-470 MHz)
GSM 900
(890-960 MHz)
GSM 1800
(1710-1880 MHz)
UMTS
(1920-2170 MHz)
2.2 to 3 GHz
Adaptation / return loss - 32 dB - 32 dB - 30 dB - 30 dB - 26 dB
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : 7/16 femelle conforme à la norme DIN 47.223
: 7/16 female in compliance with DIN 47.223 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver-plated brass
Matière et protection de l'écrou de P.E. : LAITON nickelé
/ Material and finish of the clamping nut : Nickel-plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE argenté
/ Material and finish of the inner contact : Silver-plated bronze
Etanchéité du presse-étoupe / Clamping nut waterproofing : joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 25 N.m maxi.
Température d'utilisation. / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° C
Poids / Weight : 950 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-308
• Retour sommaire / Back to content • ANM 308
15. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur 7/16 femelle à presse étoupe pour câble HPL 50-1-1/4" F
7/16 female connector for corrugated cable
AST-684
Page: 1/1
Rédigé par : J. GANON Approuvé par : E; ROCHEFORT Edition du : A1 - 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome.fr
1. REFERENCE : C0003A Code fabricant / Manufacturer code : 08 100 021
2. DIMENSIONS (mm)
40.00
60.00
33.70
18.40
46 /plats
46 / flats
34 /plats
34 / flats
95.50
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 10 G ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 0.8 m ΩΩΩΩ
- Contact extérieur / Outer contact : 1.5 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 3 kV eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 2.7 kV eff / 50 Hz
Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec
2 porteuses à 20 W, F ≤ 1880 MHz : ≤≤≤≤ - 153 dBc
/ 3rd
order intermodulation product measured in swept frequency mode with 2 x 20 W carriers, F ≤ 1880 MHz
TETRA
(380-470 MHz)
GSM 900
(890-960 MHz)
GSM 1800
(1710-1880 MHz)
UMTS
(1920-2170 MHz)
2.2 to 3 GHz
Adaptation / return loss - 32 dB - 32 dB - 30 dB - 30 dB - 26 dB
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : 7/16 femelle conforme à la norme DIN 47.223
: 7/16 female in compliance with DIN 47.223 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver-plated brass
Matière et protection de l'écrou de P.E. : LAITON nickelé
/ Material and finish of the clamping nut : Nickel-plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE argenté
/ Material and finish of the inner contact : Silver-plated bronze
Etanchéité du presse-étoupe / Clamping nut waterproofing : joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 25 N.m maxi.
Température d'utilisation / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° C
Poids / Weight : 950 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-359
• Retour sommaire / Back to content • ANM-359
16. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur 7/16 femelle à presse étoupe pour câble HPL 50-7/8F
7/16 female connector for corrugated 7/8" flexible cable
AST-679
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 - 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue du Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : www.acome.fr
1. REFERENCE : C0002A Code fabricant / Manufacturer code : 08 100 018
2. DIMENSIONS (mm)
36 /plats
36 / flats
30 /plats
30 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 10 G ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / inner contact : ≤≤≤≤ 0.8 m ΩΩΩΩ
- Contact extérieur / Outer contact : 1.5 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 3 kV eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 2.7 kV eff / 50 Hz
Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec
2 porteuses à 20 W, F ≤ 1880 MHz : ≤≤≤≤ - 153 dBc
/ 3rd
order intermodulation product measured in swept frequency mode with 2 x 20 W carriers, F ≤ 1880 MHz
TETRA
(380-470 MHz)
GSM 900
(890-960 MHz)
GSM 1800
(1710-1880 MHz)
UMTS
(1920-2170 MHz)
2.2 to 3 GHz
Adaptation / return loss - 32 dB - 32 dB - 30 dB - 30 dB - 26 dB
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : 7/16 femelle conforme à la norme DIN 47.223
: 7/16 female in compliance with DIN 47.223 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver-plated brass
Matière et protection de l'écrou de P.E. : LAITON nickelé
/ Material and finish of the clamping nut : Nickel-plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE argenté
/ Material and finish of the inner contact : Silver-plated bronze
Etanchéité du presse-étoupe / Clamping nut waterproofing : joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 25 N.m maxi.
Température d'utilisation. / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° C
Poids / Weight : 245 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-265
• Retour sommaire / Back to content • ANM-265
17. SPECIFICATION TECHNIQUE
DATA SHEET
Connecteur 7/16 femelle à presse étoupe pour câble HPL 50-1/2F
7/16 female connector for corrugated 1/2" flexible cable
AST-678
Page: 1/1
Rédigé par : J. GANON Approuvé par : E. ROCHEFORT Edition du : A1 – 04 / 01 / 2001
DIVISION RADIOVIDEOCOM - 52, rue Montparnasse - 75014 PARIS - France Tél : +(33) 1 42 79 14 00 - Fax (33) 1 42 79 15 00 - DRDV@acome.fr - Site : ww.acome.fr
1. REFERENCE : C0001A Code fabricant / Manufacturer code : 08 100 019
2. DIMENSIONS (mm)
25 /plats
25 / flats
25 /plats
25 / flats
3. CARACTERISTIQUES ELECTRIQUES / Electrical characteristics
Impédance caractéristique / Impedance : 50 ΩΩΩΩ ±±±± 2%
Fréquence d'utilisation / Operating frequency range : DC - 3 GHz
Résistance d'isolement / Insulation resistance : ≥≥≥≥ 10 G ΩΩΩΩ
Résistance de contact / Contact resistance - Contact intérieur / Inner contact : ≤≤≤≤ 0.8 m ΩΩΩΩ
- Contact extérieur / Outer contact : 1.5 m ΩΩΩΩ
Essai de tenue en tension (au sol) / Voltage test (at sea level) : 3 kV eff / 50 Hz
Tension de service (au sol) / Operating voltage (at sea level) : 2.7 kV eff / 50 Hz
Produit d'intermodulation d'ordre 3 mesuré en mode fréquentiel balayé avec
2 porteuses à 20 W, F ≤ 1880 MHz : ≤≤≤≤ - 153 dBc
/ 3rd
order intermodulation product measured in swept frequency mode with 2 x 20 W carriers, F ≤ 1880 MHz
TETRA
(380-470 MHz)
GSM 900
(890-960 MHz)
GSM 1800
(1710-1880 MHz)
UMTS
(1920-2170 MHz)
2.2 to 3 GHz
Adaptation / return loss - 32 dB - 32 dB - 30 dB - 30 dB - 26 dB
4. CARACTERISTIQUES MECANIQUES / Mechanical characteristics
Norme (accouplement) / Coupling standard : 7/16 femelle conforme à la norme DIN 47.223
: 7/16 female in compliance with DIN 47.223 standard
Matière et protection du corps : LAITON argenté
/ Material and finish of the body : Silver-plated brass
Matière et protection de l'écrou de P.E. : LAITON nickelé
/ Material and finish of the clamping nut : Nickel-plated brass
Isolant / Insulator : PTFE
Matière et protection du contact intérieur : BRONZE argenté
/ Material and finish of the inner contact : Silver-plated bronze
Etanchéité du presse-étoupe / Clamping nut waterproofing : joint torique en NITRILE / Nitrile O-ring
Couple de serrage / Coupling torque : 25 N.m maxi.
Température d'utilisation. / Operating temperature range : - 40° C <<<< θθθθ <<<< + 70° C
Poids / Weight : 175 g
Indice d'étanchéité / Waterproofing index : IP 68
5. NOTICE DE MONTAGE / Installation instructions : ANM-264
• Retour sommaire / Back to content • ANM-264