2. TECTONITES
Tectonites are deformed rocks, the fabric
of which is due to the systematic movement
of the individual units under a common
external force.
3. Fabric of tectonites reflects the history of
their deformation, or rocks with fabric that
clearly displays coordinated geometric
features that indicate continuous solid
(ductile) flow during formation.
4. FABRIC
The geometric arrangement of component
features in the rock, seen on a large scale enough
to include many samples of each feature.
The features themselves are called fabric
elements.
Fabric elements include mineral grains, clasts,
compositional layers, fold hinges, and planes of
parting.
5. CLASSIFICATION
S-Tectonites have a dominant planar fabric and may indicate a flattening
type of strain. This may also be due to a lack of minerals capable of giving a
lineation e.g. in a phyllonite.
L-Tectonites have a dominant linear fabric and generally indicate a
constrictional type of strain.
L-S Tectonites have equally developed linear and planar fabric elements and
may indicate a plane strain deformation. Many mylonites are L-S tectonites
consistent with a simple shear deformation.
S-tectonite L-tectonite LS-tectonite
6. A planar fabric, or foliation is one in which the fabric element is a
planar or tabular feature( meaning it is shorter in one dimension than in
the other two).
A linear fabric, or lineation is one in which the fabric element is
effectively a linear feature ( i.e. it is longer in one dimension relative to the
other dimensions).
8. FOLIATION
The property of rocks whereby they break along approximately parallel
surfaces.
Bedding fissility
Cleavage (rock cleavage)
Schistosity
Gneissosity
9. CLEAVAGE
Secondary fabric element, formed under low-temperature conditions, that
imparts on the rock on a tendency to split along planes.
Four main categories of cleavages that are differentiated from one another
by their morphological characteristics.
Disjunctive cleavage
Pencil cleavage
Slaty cleavage
Crenulation cleavage
10. DISJUNCTIVE CLEAVAGE
Is a foliation that forms mostly in sedimentary rocks that have been
subjected to a tectonic differential stress under sub-greenschist facies
conditions.
It is defined by an array of sub parallel fabric elements called cleavage
domains in which the original rock fabric and composition have been
markedly changed by the process of pressure solution.
Domains are separated from one another by intervals called microlithons.
11. FRACTURE CLEAVAGE
Is essentially closely spaced jointing. The minerals in the rock are not parallel to
the cleavage.
The distance between the individual planes of cleavage can be measured and is
commonly a matter of millimeters or centimeters.
If the distance between the fractures exceeds a few centimeters, the term ‘jointing’ is
more appropriately used.
The term spaced cleavage has been suggested to include all cleavages that are
separated by a finite distance. It would include fracture cleavage, slip cleavage,
and shear cleavage.
12. SHEAR CLEAVAGE
The term has been used a synonymous with slip cleavage,.
These are closely fractures along which there has been some displacement.
It is essentially a fracture cleavage along which there has been
displacement.
13. SLIP CLEAVAGE
Also called strain-slip cleavage and crenulation cleavage.
In many metamorphic terranes the schistosity may be crinkled into small
folds with a wavelength of a fraction of an inch. One limb of these small
folds becomes a zone of weakness. The rock tend to break parallel to these
zones.
14. BEDDING CLEAVAGE
Cleavage or schistosity that is parallel to the bedding is commonly referred
to as bedding cleavage or bedding schistosity.
It is commonly similar to slaty cleavage in that it is caused by parallel
platy minerals.
15. AXIAL PLANE CLEAVAGE
Cleavage or schistosity essentially parallel to the axial planes of the folds is
called axial plane cleavage.
16. SPACED CLEAVAGE
Development of a spaced
cleavage (e.g., stylolites)
Pressure Solution mechanism
Cleavage domain and microlithonof spaced cleavage )
19. PENCIL CLEAVAGE
If a fine-grained sedimentary rock (shale or Mudstone breaks into
elongate pencil-like shards because of its internal fabric we say that it has a
pencil cleavage.
Typically pencils are 5-10 cm long and 0.5-1 cm in width.
This is well exhibited in shale.
20. SLATY CLEAVAGE
Caused by the parallel arrangement of platy minerals, such as micas or
chlorites, or by the parallel arrangement of ellipsoidal grains of such as
hornblende, may impart a cleavage to the rock if the long axes lie in the
same plane but are not parallel it one another.
A rock possessing slaty cleavage can be split into an infinite number of thin
sheets parallel to the cleavage.
The term slaty cleavage is used for less intensely metamorphosed rocks,
such as slate, whereas schistosity is employed if the rock is recrystallised into
minerals that are recognized by the naked eye.
The term continuous cleavage has been suggested to embrace slaty
cleavage and schstosity.
Cleavage and schistosity may or may not be parallel to bedding.
21. (PHYLLITIC CLEAVAGE AND SCHISTOSITY)
Both form at T>350°C (schistosity generally >500°C)
Clay in shale (and slate) recrystalize at higher temperature (by diffusion)
into fine-grained chlorite and muscovite (if phyllite) and coarse-grained
muscovite/biotite if a schist
Schist often contain porphyroblasts (newly grown large crystals), such as
garnet
slate phyllite mica schist
Garnet-mica schist
22. GNEISSOSITY
Foliation is defined by compositional banding.
Commonly light and dark bands of felsic and mafic mineralogy alternate.
The light coloured layers are rich in quartz and feldspar whereas darker
layers contain more of the minerals amphibole/pyroxene (and or biotite).
23. FOLIATIONS: GNEISSIC
LAYERING (OR, HOW TO FORM GNEISS)
Inheritance from original rock types
Creation of new
compositional
banding
via Transposition
Metamorphic differentiation (diffusion
Lit-par-lit intrusion
25. FOLIATIONS IN FOLDS AND FAULT ZONES
Cleavage fans change from convergent in competent beds (sand stone,
limestone ) to divergent or axial planar in incompetent beds (shale, marl)
cleavage changes orientation from bed to bed, a pattern that is called
cleavage refraction.
Cleavage refraction is the change in cleavage attitude that occurs where
cleavage domains cross from one lithology into another of different
competency, and reflects variation in the local strain field between beds.
26. FOLIATION AND FOLDS
Formation of cleavage in
a fold-thrust belt
Layer-parallel shortening
Flexural folding reorients
cleavage (fanning cleavage)
in sandstone
Axial-planar cleavage
(in shale)
27. LINEATION
Parallelism of some directional property in the rock
Form lineations
Surface lineations
Mineral lineations
29. FOLD AXES
Attitude of the fold axes is often the reference to which other lineations are
compared.
30. RODS
When intense deformation detaches the limbs of folds, as occurs during fold
transportation, isolated fold hinges may be left in the rock. Such hinges are called
rods and typically occur in a multilayer composed of phyllite (or schist ) or
quartzite; the quartz layers are relatively rigid and define visible folds, the limbs of
which may thinned so severely that they pinched out, the quartz flows into the
hinge zone, where it is preserved as a rod.
31. MULLIONS AND BOUNDINS
Are cusplike corrugations that form at the contact between units of
different competencies in a deformed multilayered sequence; the axes of
mullions are a lineation.
Boundins are tablet-shaped lenses of relatively rigid lithology, embedded
in a weaker matrix, that have correctly undergone layer-parallel
stretching.
These boundins are are separated by narrow boundin necks that are
linear objects.
35. TYPES OF LINEATION
Slickenines on a fault
Fabric that is partly planar and linear
Mineral intersection lineation
Mineral elongation lineation
Intersection lineation between
bedding and cleavage
Crenulation lineation
Slickenlines on a bedding plane
caused by flexural slip