Soumettre la recherche
Mettre en ligne
256Solution256.pdf
•
0 j'aime
•
3 vues
S
singhanubhav1234
Suivre
256 Solution 256.
Lire moins
Lire la suite
Formation
Signaler
Partager
Signaler
Partager
1 sur 1
Télécharger maintenant
Télécharger pour lire hors ligne
Recommandé
the Zn(OH)2 precipitation reaction equation: Zn2+ + 2OH- = Zn(OH)2 the Zn(OH)42- complex formation equation: Zn2+ + 4OH- = Zn(OH)4^2- Precipitate will not form. Solution the Zn(OH)2 precipitation reaction equation: Zn2+ + 2OH- = Zn(OH)2 the Zn(OH)42- complex formation equation: Zn2+ + 4OH- = Zn(OH)4^2- Precipitate will not form..
the Zn(OH)2 precipitation reaction equation Zn2.pdf
the Zn(OH)2 precipitation reaction equation Zn2.pdf
singhanubhav1234
The side facing the SUN will absorb Infra-red radiation from the sun and thus heat up. If the asteroid is made of heat conductive material, then the heat will transfer through the asteroid to the other side Solution The side facing the SUN will absorb Infra-red radiation from the sun and thus heat up. If the asteroid is made of heat conductive material, then the heat will transfer through the asteroid to the other side.
The side facing the SUN will absorb Infra-red rad.pdf
The side facing the SUN will absorb Infra-red rad.pdf
singhanubhav1234
Stereoisomers are isomeric molecules that have the same molecular formula and sequence of bonded atoms (constitution), but that differ only in the three-dimensional orientations of their atoms in space. This contrasts with structural isomers, which share the same molecular formula, but the bond connections and/or their order differ(s) between different atoms/groups. In stereoisomers, the order and bond connections of the constituent atoms remain the same, but their orientation in space differ. stereo isomers are classifides in to two types (1)enantiomers (2)diastereomers Enantiomers are two stereoisomers that are related to each other by a reflection: They are mirror images of each other, which are non-superimposable. Human hands are a macroscopic example of stereoisomerism. Every stereogenic center in one has the opposite configuration in the other. Two compounds that are enantiomers of each other have the same physical properties, except for the direction in which they rotate polarized light and how they interact with different optical isomers of other compounds. As a result, different enantiomers of a compound may have substantially different biological effects. Pure enantiomers also exhibit the phenomenon of optical activity and can be separated only with the use of a chiral agent. In nature, only one enantiomer of most chiral biological compounds, such as amino acids (except glycine, which is achiral), is present. Diastereomers are stereoisomers not related through a reflection operation. They are not mirror images of each other. These include meso compounds, cis-trans (E-Z) isomers, and non-enantiomeric optical isomers. Diastereomers seldom have the same physical properties. In the example shown below, the meso form of tartaric acid forms a diastereomeric pair with both levo and dextro tartaric acids, which form an enantiomeric pair. Solution Stereoisomers are isomeric molecules that have the same molecular formula and sequence of bonded atoms (constitution), but that differ only in the three-dimensional orientations of their atoms in space. This contrasts with structural isomers, which share the same molecular formula, but the bond connections and/or their order differ(s) between different atoms/groups. In stereoisomers, the order and bond connections of the constituent atoms remain the same, but their orientation in space differ. stereo isomers are classifides in to two types (1)enantiomers (2)diastereomers Enantiomers are two stereoisomers that are related to each other by a reflection: They are mirror images of each other, which are non-superimposable. Human hands are a macroscopic example of stereoisomerism. Every stereogenic center in one has the opposite configuration in the other. Two compounds that are enantiomers of each other have the same physical properties, except for the direction in which they rotate polarized light and how they interact with different optical isomers of other compounds. As a result, different enantiomer.
Stereoisomers are isomeric molecules that have th.pdf
Stereoisomers are isomeric molecules that have th.pdf
singhanubhav1234
Salt dissolving in water physical or chemical Definition Salt water - Salt water or saltwater may refer to: Saline water, water containing dissolved salts; Brine, water saturated or nearly saturated with salt; Brackish water, water that is saltier ..... Solubility equilibrium - Solubility equilibrium is any type of chemical equilibrium relationship between solid and dissolved states of a compound at saturation. Solubility equilibria involve application of chemical principles and constants to predict solubility of substances under specific conditions (because solubility is sensitive to the conditions, while the constants are less so). The substance that is dissolved can be an organic solid such as sugar or an ionic solid such as table salt. The main difference is that ionic solids dissociate into constituent ions when they dissolve in water. Most commonly water is the solvent of interest, although the same basic principles apply with any solvent. In the case of environmental science studies of water quality, the total concentration of dissolved solids (not necessarily at saturation) is referred to as total dissolved solids. Dissolution of an organic solid can be described as an equilibrium between the substance in its solid and dissolved forms:.... Salt water - Saline water, water containing dissolved salts; Brine, water saturated or nearly saturated with salt; Brackish water, water that is saltier than fresh water, but not as salty as ..... Ammonium hydrosulfide - Ammonium hydrosulfide is the chemical compound with the formula (NH 4)SH. It is the salt derived from the ammonium cation and the hydrosulfide anion. By passing hydrogen sulfide mixed with a slight excess of ammonia gives the colourless, micaceous crystals. It dissolves readily in water.. Why is the Ocean Salty? Geography II series, from TMW Media. All water, even rainwater contains dissolved chemicals which scientists call \'Salts.\' These salts eventually wash down into rivers and streams and eventually find their way into oceans and seas.Subjects covered include: The origin of the sea. The sources of salt. The components of sea water. The salinity of the sea and its variability. How sea life affects sea waters composition. ... Geography Oceans Water Salt Sediments physical science TMW Media trailer ... Purifying Salt Peter Procedures for purifying chemicals are being invented and re-invented all the time. Purification depends very much on the chemicals that are considered the contamination, and their properties compare to the chemical you are trying to purify. The mixture that you are trying to purify will dictate how easy the purification process will be. There are no \'one fit all solutions\', and indeed, some chemicals are so hard to purify that the finished purified product fetch amazing prices. Purifying Potassium Nitrate (KNO3) Recrystallization is a physical method targeting the purification of compounds. The procedure involves dissolving a compound in a hot solvent to for.
Salt dissolving in water physical or chemical Def.pdf
Salt dissolving in water physical or chemical Def.pdf
singhanubhav1234
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11.69 Solution POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11.69.
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11..pdf
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11..pdf
singhanubhav1234
Not really. Strontium carbonate can only dissolve in water at the rate of about 0.1g/L. However, it dissolves more readily in dilute acids (causing a reaction--strontium carbonate is a base) and in fully-carbonated wate Solution Not really. Strontium carbonate can only dissolve in water at the rate of about 0.1g/L. However, it dissolves more readily in dilute acids (causing a reaction--strontium carbonate is a base) and in fully-carbonated wate.
Not really. Strontium carbonate can only dissolve.pdf
Not really. Strontium carbonate can only dissolve.pdf
singhanubhav1234
Lattice energy increases with charge multiplicity and relative size of ions involved. For those listed, CaO has 2+/- ions and will therefore have the highest lattice energy. LiI, LiF, and RbI all have 1+/- ions. The combination of ions that have the smallest separation (assuming the ions touch, we just add ionic radii for this) will have the highest lattice energy in this group.....this would be LiF; the combination of ions that have the largest separation will have the smallest lattice energy ..... this would be RbI. Least negative ...........---> most negative RbI, LiI, LiF, CaO Ions that exist in ionic solids are surrounded by oppositely charged ions in an orderly way. Metallic ions by themselves would have have such order to them. Atoms are held together in different types of solids by different types of bonding forces. For example a network solid like diamond involves localized covalent bonds between the C atoms where as an ionic solid such as NaClinvolves the attraction of oppositely charged ions , or Coulombic forces of attraction. (This answer is not meant to be exhaustive my any means.) Solution Lattice energy increases with charge multiplicity and relative size of ions involved. For those listed, CaO has 2+/- ions and will therefore have the highest lattice energy. LiI, LiF, and RbI all have 1+/- ions. The combination of ions that have the smallest separation (assuming the ions touch, we just add ionic radii for this) will have the highest lattice energy in this group.....this would be LiF; the combination of ions that have the largest separation will have the smallest lattice energy ..... this would be RbI. Least negative ...........---> most negative RbI, LiI, LiF, CaO Ions that exist in ionic solids are surrounded by oppositely charged ions in an orderly way. Metallic ions by themselves would have have such order to them. Atoms are held together in different types of solids by different types of bonding forces. For example a network solid like diamond involves localized covalent bonds between the C atoms where as an ionic solid such as NaClinvolves the attraction of oppositely charged ions , or Coulombic forces of attraction. (This answer is not meant to be exhaustive my any means.).
Lattice energy increases with charge multiplicity.pdf
Lattice energy increases with charge multiplicity.pdf
singhanubhav1234
Lucas Test uses HCl and ZnCl2, it proceeds via Sn1 mechanism tertiary alcohols will be the most reactive followed by secondary alcohols. Primary alcohols will not be reactive. Solution Lucas Test uses HCl and ZnCl2, it proceeds via Sn1 mechanism tertiary alcohols will be the most reactive followed by secondary alcohols. Primary alcohols will not be reactive..
Lucas Test uses HCl and ZnCl2, it proceeds via Sn.pdf
Lucas Test uses HCl and ZnCl2, it proceeds via Sn.pdf
singhanubhav1234
Recommandé
the Zn(OH)2 precipitation reaction equation: Zn2+ + 2OH- = Zn(OH)2 the Zn(OH)42- complex formation equation: Zn2+ + 4OH- = Zn(OH)4^2- Precipitate will not form. Solution the Zn(OH)2 precipitation reaction equation: Zn2+ + 2OH- = Zn(OH)2 the Zn(OH)42- complex formation equation: Zn2+ + 4OH- = Zn(OH)4^2- Precipitate will not form..
the Zn(OH)2 precipitation reaction equation Zn2.pdf
the Zn(OH)2 precipitation reaction equation Zn2.pdf
singhanubhav1234
The side facing the SUN will absorb Infra-red radiation from the sun and thus heat up. If the asteroid is made of heat conductive material, then the heat will transfer through the asteroid to the other side Solution The side facing the SUN will absorb Infra-red radiation from the sun and thus heat up. If the asteroid is made of heat conductive material, then the heat will transfer through the asteroid to the other side.
The side facing the SUN will absorb Infra-red rad.pdf
The side facing the SUN will absorb Infra-red rad.pdf
singhanubhav1234
Stereoisomers are isomeric molecules that have the same molecular formula and sequence of bonded atoms (constitution), but that differ only in the three-dimensional orientations of their atoms in space. This contrasts with structural isomers, which share the same molecular formula, but the bond connections and/or their order differ(s) between different atoms/groups. In stereoisomers, the order and bond connections of the constituent atoms remain the same, but their orientation in space differ. stereo isomers are classifides in to two types (1)enantiomers (2)diastereomers Enantiomers are two stereoisomers that are related to each other by a reflection: They are mirror images of each other, which are non-superimposable. Human hands are a macroscopic example of stereoisomerism. Every stereogenic center in one has the opposite configuration in the other. Two compounds that are enantiomers of each other have the same physical properties, except for the direction in which they rotate polarized light and how they interact with different optical isomers of other compounds. As a result, different enantiomers of a compound may have substantially different biological effects. Pure enantiomers also exhibit the phenomenon of optical activity and can be separated only with the use of a chiral agent. In nature, only one enantiomer of most chiral biological compounds, such as amino acids (except glycine, which is achiral), is present. Diastereomers are stereoisomers not related through a reflection operation. They are not mirror images of each other. These include meso compounds, cis-trans (E-Z) isomers, and non-enantiomeric optical isomers. Diastereomers seldom have the same physical properties. In the example shown below, the meso form of tartaric acid forms a diastereomeric pair with both levo and dextro tartaric acids, which form an enantiomeric pair. Solution Stereoisomers are isomeric molecules that have the same molecular formula and sequence of bonded atoms (constitution), but that differ only in the three-dimensional orientations of their atoms in space. This contrasts with structural isomers, which share the same molecular formula, but the bond connections and/or their order differ(s) between different atoms/groups. In stereoisomers, the order and bond connections of the constituent atoms remain the same, but their orientation in space differ. stereo isomers are classifides in to two types (1)enantiomers (2)diastereomers Enantiomers are two stereoisomers that are related to each other by a reflection: They are mirror images of each other, which are non-superimposable. Human hands are a macroscopic example of stereoisomerism. Every stereogenic center in one has the opposite configuration in the other. Two compounds that are enantiomers of each other have the same physical properties, except for the direction in which they rotate polarized light and how they interact with different optical isomers of other compounds. As a result, different enantiomer.
Stereoisomers are isomeric molecules that have th.pdf
Stereoisomers are isomeric molecules that have th.pdf
singhanubhav1234
Salt dissolving in water physical or chemical Definition Salt water - Salt water or saltwater may refer to: Saline water, water containing dissolved salts; Brine, water saturated or nearly saturated with salt; Brackish water, water that is saltier ..... Solubility equilibrium - Solubility equilibrium is any type of chemical equilibrium relationship between solid and dissolved states of a compound at saturation. Solubility equilibria involve application of chemical principles and constants to predict solubility of substances under specific conditions (because solubility is sensitive to the conditions, while the constants are less so). The substance that is dissolved can be an organic solid such as sugar or an ionic solid such as table salt. The main difference is that ionic solids dissociate into constituent ions when they dissolve in water. Most commonly water is the solvent of interest, although the same basic principles apply with any solvent. In the case of environmental science studies of water quality, the total concentration of dissolved solids (not necessarily at saturation) is referred to as total dissolved solids. Dissolution of an organic solid can be described as an equilibrium between the substance in its solid and dissolved forms:.... Salt water - Saline water, water containing dissolved salts; Brine, water saturated or nearly saturated with salt; Brackish water, water that is saltier than fresh water, but not as salty as ..... Ammonium hydrosulfide - Ammonium hydrosulfide is the chemical compound with the formula (NH 4)SH. It is the salt derived from the ammonium cation and the hydrosulfide anion. By passing hydrogen sulfide mixed with a slight excess of ammonia gives the colourless, micaceous crystals. It dissolves readily in water.. Why is the Ocean Salty? Geography II series, from TMW Media. All water, even rainwater contains dissolved chemicals which scientists call \'Salts.\' These salts eventually wash down into rivers and streams and eventually find their way into oceans and seas.Subjects covered include: The origin of the sea. The sources of salt. The components of sea water. The salinity of the sea and its variability. How sea life affects sea waters composition. ... Geography Oceans Water Salt Sediments physical science TMW Media trailer ... Purifying Salt Peter Procedures for purifying chemicals are being invented and re-invented all the time. Purification depends very much on the chemicals that are considered the contamination, and their properties compare to the chemical you are trying to purify. The mixture that you are trying to purify will dictate how easy the purification process will be. There are no \'one fit all solutions\', and indeed, some chemicals are so hard to purify that the finished purified product fetch amazing prices. Purifying Potassium Nitrate (KNO3) Recrystallization is a physical method targeting the purification of compounds. The procedure involves dissolving a compound in a hot solvent to for.
Salt dissolving in water physical or chemical Def.pdf
Salt dissolving in water physical or chemical Def.pdf
singhanubhav1234
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11.69 Solution POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11.69.
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11..pdf
POH=-log[OH-] =-log(0.005) =2.301 PH=14-2.301=11..pdf
singhanubhav1234
Not really. Strontium carbonate can only dissolve in water at the rate of about 0.1g/L. However, it dissolves more readily in dilute acids (causing a reaction--strontium carbonate is a base) and in fully-carbonated wate Solution Not really. Strontium carbonate can only dissolve in water at the rate of about 0.1g/L. However, it dissolves more readily in dilute acids (causing a reaction--strontium carbonate is a base) and in fully-carbonated wate.
Not really. Strontium carbonate can only dissolve.pdf
Not really. Strontium carbonate can only dissolve.pdf
singhanubhav1234
Lattice energy increases with charge multiplicity and relative size of ions involved. For those listed, CaO has 2+/- ions and will therefore have the highest lattice energy. LiI, LiF, and RbI all have 1+/- ions. The combination of ions that have the smallest separation (assuming the ions touch, we just add ionic radii for this) will have the highest lattice energy in this group.....this would be LiF; the combination of ions that have the largest separation will have the smallest lattice energy ..... this would be RbI. Least negative ...........---> most negative RbI, LiI, LiF, CaO Ions that exist in ionic solids are surrounded by oppositely charged ions in an orderly way. Metallic ions by themselves would have have such order to them. Atoms are held together in different types of solids by different types of bonding forces. For example a network solid like diamond involves localized covalent bonds between the C atoms where as an ionic solid such as NaClinvolves the attraction of oppositely charged ions , or Coulombic forces of attraction. (This answer is not meant to be exhaustive my any means.) Solution Lattice energy increases with charge multiplicity and relative size of ions involved. For those listed, CaO has 2+/- ions and will therefore have the highest lattice energy. LiI, LiF, and RbI all have 1+/- ions. The combination of ions that have the smallest separation (assuming the ions touch, we just add ionic radii for this) will have the highest lattice energy in this group.....this would be LiF; the combination of ions that have the largest separation will have the smallest lattice energy ..... this would be RbI. Least negative ...........---> most negative RbI, LiI, LiF, CaO Ions that exist in ionic solids are surrounded by oppositely charged ions in an orderly way. Metallic ions by themselves would have have such order to them. Atoms are held together in different types of solids by different types of bonding forces. For example a network solid like diamond involves localized covalent bonds between the C atoms where as an ionic solid such as NaClinvolves the attraction of oppositely charged ions , or Coulombic forces of attraction. (This answer is not meant to be exhaustive my any means.).
Lattice energy increases with charge multiplicity.pdf
Lattice energy increases with charge multiplicity.pdf
singhanubhav1234
Lucas Test uses HCl and ZnCl2, it proceeds via Sn1 mechanism tertiary alcohols will be the most reactive followed by secondary alcohols. Primary alcohols will not be reactive. Solution Lucas Test uses HCl and ZnCl2, it proceeds via Sn1 mechanism tertiary alcohols will be the most reactive followed by secondary alcohols. Primary alcohols will not be reactive..
Lucas Test uses HCl and ZnCl2, it proceeds via Sn.pdf
Lucas Test uses HCl and ZnCl2, it proceeds via Sn.pdf
singhanubhav1234
The answer is: D. they are significantly higher than the boiling points of other compounds This is due to the stronger hydrogen bonding present Solution The answer is: D. they are significantly higher than the boiling points of other compounds This is due to the stronger hydrogen bonding present.
The answer isD. they are significantly higher than the boiling po.pdf
The answer isD. they are significantly higher than the boiling po.pdf
singhanubhav1234
Silica Fume is a very reactive pozzolana because of its chemical and physical properties. Pozzolona reacts with the Calcium Hydroxide which is by product of the hydration reaction to form compounds having cementitious properties. Hence when silica fume is not used, the calcium hydroxide (Formed after hydration reaction) remains as it is which does not have any cementitious properties. By adding Silica fume, calcium hydorxide is converted to cementitious products. Solution Silica Fume is a very reactive pozzolana because of its chemical and physical properties. Pozzolona reacts with the Calcium Hydroxide which is by product of the hydration reaction to form compounds having cementitious properties. Hence when silica fume is not used, the calcium hydroxide (Formed after hydration reaction) remains as it is which does not have any cementitious properties. By adding Silica fume, calcium hydorxide is converted to cementitious products..
Silica Fume is a very reactive pozzolana because of its chemical and.pdf
Silica Fume is a very reactive pozzolana because of its chemical and.pdf
singhanubhav1234
Problem 01: #!/usr/bin/perl use strict; use warnings; $_ = \"Let’s rent a bus!\"; s/(.)(\\w).*(\\2).*(.)$/$1$2$3$4/ ; print \"[\" ; print ; print \"]\"; exit; output : [Lee!] Solution Problem 01: #!/usr/bin/perl use strict; use warnings; $_ = \"Let’s rent a bus!\"; s/(.)(\\w).*(\\2).*(.)$/$1$2$3$4/ ; print \"[\" ; print ; print \"]\"; exit; output : [Lee!].
Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf
Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf
singhanubhav1234
enzyme\'s active site does not have the exact shape of substrate, but the substrate brings about or induces a change in the shape of the active site Solution enzyme\'s active site does not have the exact shape of substrate, but the substrate brings about or induces a change in the shape of the active site.
enzymes active site does not have the exact sha.pdf
enzymes active site does not have the exact sha.pdf
singhanubhav1234
Multicasting: It is the communication between a single sender and multiple receivers on a network. Typical uses include the updating of mobile workers from a home office and the episodic issuance of online newsletters IGMP works as: Internet Group Management Protocol is allows a host to promote its multicast group membership to adjacent switches and routers. IGMP is used by the TCP/IP protocol set to achieve dynamic multicasting When a multicast transmission initiates the software creates a multicast group. This multicast group address consists of an IP address by the first octet in the range 224 – 239 and is particular in the IP packet as the end address for this traffic. The host initiate the transmission send a message to the 224.0.0.2 address specify the multicast group address. And the switch receives this message and adds the multicast group to its table and adds the receiving port as a member of the group. PIM works as: The PIM protocol can be configured to work on IPv4 and IPv6 networks. Multicast protocols are used to carry multicast packets from one source to multiple receivers. They ease better bandwidth use and use less host and router processing and ideal for usage in applications such as video and audio. PIM is a usually used multicast routing protocol. SDN: Software Defined Networking is an upcoming architecture that is dynamic, manageable and adaptable of making it perfect for the dynamic nature of today\'s applications. Open Flow: Open Flow is enable for researchers to run experimental protocols in the campus networks we use every day. Open Flow is added as a feature to saleable Ethernet switches, routers and wireless access points and provide a regular hook to allow researchers to run experiments without require vendors to expose the inner workings of their network devices. Solution Multicasting: It is the communication between a single sender and multiple receivers on a network. Typical uses include the updating of mobile workers from a home office and the episodic issuance of online newsletters IGMP works as: Internet Group Management Protocol is allows a host to promote its multicast group membership to adjacent switches and routers. IGMP is used by the TCP/IP protocol set to achieve dynamic multicasting When a multicast transmission initiates the software creates a multicast group. This multicast group address consists of an IP address by the first octet in the range 224 – 239 and is particular in the IP packet as the end address for this traffic. The host initiate the transmission send a message to the 224.0.0.2 address specify the multicast group address. And the switch receives this message and adds the multicast group to its table and adds the receiving port as a member of the group. PIM works as: The PIM protocol can be configured to work on IPv4 and IPv6 networks. Multicast protocols are used to carry multicast packets from one source to multiple receivers. They ease better bandwidth use and use less host and route.
MulticastingIt is the communication between a single sender and m.pdf
MulticastingIt is the communication between a single sender and m.pdf
singhanubhav1234
just moved a new USB 2.0 device from a new system to an older system. The new device worked properly on the new system but doesn’t install properly on the older system. All other USB devices work properly on the older system. C. The old system’s BIOS is out-of-date and needs to be upgraded. Solution just moved a new USB 2.0 device from a new system to an older system. The new device worked properly on the new system but doesn’t install properly on the older system. All other USB devices work properly on the older system. C. The old system’s BIOS is out-of-date and needs to be upgraded..
just moved a new USB 2.0 device from a new system to an older system.pdf
just moved a new USB 2.0 device from a new system to an older system.pdf
singhanubhav1234
Introduction Few things are more aggravating to produce on a worksite than concrete. Bags of cement, sand, aggregate (gravel) and possibly other additives must be delivered to the construction area. A supply of clean water is also necessary, along with a rented concrete mixing hopper. Even after all the dusty and heavy ingredients have been loaded into the hopper, one small error in the wet/dry ratio can render an entire batch of concrete unusable. One common solution to this messy and time-consuming problem is “READY MIX CONCRETE”. Ready-mix concrete (RMC) is a ready-to-use material, with predetermined mixture of cement, sand, aggregates and water. RMC is a type of concrete manufactured in a factory according to a set recipe or as per specifications of the customer, at a centrally located batching plant. It is delivered to a worksite, often in truck mixers capable of mixing the ingredients of the concrete en route or just before delivery of the batch. This results in a precise mixture, allowing specialty concrete mixtures to be developed and implemented on construction sites. The second option available is to mix the concrete at the batching plant and deliver the mixed concrete to the site in an agitator truck, which keeps the mixed concrete in correct form. In the case of the centrally mixed type, the drum carrying the concrete revolves slowly so as to prevent the mixed concrete from \"segregation\" and prevent its stiffening due to initial set. However, in the case of the truck-mixed concrete, the batched materials (sand, gravel and cement) are carried and water is added just at the time of mixing. In this case the cement remains in contact with the wet or moist material and this phase cannot exceed the permissible period, which is normally 90 minutes. The use of the RMC is facilitated through a truck-mounted \'boom placer\' that can pump the product for ready use at multi-storied construction sites. A boom placer can pump the concrete up 80 meters. Objective - Manufacturing process of ready mix concrete. Procedure – Materials required for RMC – Admixture: A substance added to the basic concrete mixture to alter one or more properties of the concrete; i.e. fibrous materials for reinforcing, water repellent treatments, and coloring compounds. Aggregate: Inert particles (i.e. gravel, sand, and stone) added to cement and water to form concrete. Cement: Dry powder that reacts chemically with water to bind the particles of aggregate, forming concrete. Portland cement is typically used in concrete production. Fly ash: Fly ash is a by-product from coal-fired electricity generating power plants. The coal used in these power plants is mainly composed of combustible elements such as carbon, hydrogen and oxygen (nitrogen and sulfur being minor elements), and non-combustible impurities (10 to 40%) usually present in the form of clay, shale, quartz, feldspar and limestone. As the coal travels through the high-temperature zone in the furnace, the combus.
IntroductionFew things are more aggravating to produce on a worksi.pdf
IntroductionFew things are more aggravating to produce on a worksi.pdf
singhanubhav1234
D) Rb Solution D) Rb.
D) Rb Solution D) Rb .pdf
D) Rb Solution D) Rb .pdf
singhanubhav1234
idk Solution idk.
idkSolutionidk.pdf
idkSolutionidk.pdf
singhanubhav1234
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,selector,varargin); % operate trajectory2(x,y,z,pitcher,roll,yaw,scale_factor,step,[selector,SoR]) % % % x,y,z center mechanical phenomenon (vector) [m] % % pitcher,roll,yaw euler\'s angles [rad] % % issue|multiplier|multiplier factor} standardisation factor [scalar] % (related to body craft dimension) % % step angle sampling issue [scalar] % (the points variety between 2 body models) % % chooseor select the body model [string] % % gripen JAS thirty-nine Gripen heli chopper % mig Mig ah64 Apache chopper % Felis catus Tomcat(Default) a10 % jet Generic jet cessna Cessna % 747 Boeing 747 airplane Generic airplane % md90 MD90 jet shuttle space vehicle % dc10 DC-10 jet % % elective INPUT: % % % read sets the camera read. Use Matlab\'s \"viewer\" as argument to reprocess this read. % % Note: % % Refernce System: % X body- The axial force on the X body axis is % positive on forward; the momentum around X body % is positive roll clockwise as viewered from behind; % Y body- The facet force on the Y body axis is % positive on the correct wing; the instant around Y % body is positive in pitcher up; % Z body- the conventional force on the Z body axis is % positive down; the instant around Z body is positive % roll clockwise as viewered from higher than. % % ******************************* % operate Version three.0 % 7/08/2004 (dd/mm/yyyy) % Valerio Scordamaglia % v.scordamaglia@tiscali.it % ******************************* if nargin<9 disp(\' Wrong:\'); disp(\' Wrong: Invalid variety Inputs!\'); M=0; return; end if (len(x)~=len(y))|(len(x)~=len(z))|(len(y)~=len(z)) disp(\' Wrong:\'); disp(\' Uncorrect Dimension of the middle mechanical phenomenon Vectors. Please Check the size\'); M=0; return; end if ((len(pitcher)~=len(roll))||(len(pitcher)~=len(yaw))||(len(roll)~=len(yaw))) disp(\' Wrong:\'); disp(\' Uncorrect Dimension of the euler\'\'s angle Vectors. Please Check the size\'); M=0; return; end if len(pitcher)~=len(x) disp(\' Wrong:\'); disp(\' Size match between euler\'\'s angle vectors and center mechanical phenomenon vectors\'); M=0; return end if step>=len(x) disp(\' Wrong:\'); disp(\' angle samplig reckon of vary. scale back step\'); M=0; return end if step<1 step=1; end if nargin==10 theViewer=cell2mat(varargin(1)); end if nargin>10 disp(\'Too several inputs arguments\'); M=0; return end if nargin<10 theViewer=[82.50 2]; end mov=nargout; cur_dir=pwd; if strcmp(selector,\'shuttle\') load shuttle; V=[-V(:,2) V(:,1) V(:,3)]; V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1)); V(:,2)=V(:,2)-round(sum(V(:,2))/size(V,1)); V(:,3)=V(:,3)-round(sum(V(:,3))/size(V,1)); elseif strcmp(selector,\'helicopter\') load helicopter; V=[-V(:,2) V(:,1) V(:,3)]; V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1)); V(:,2)=V(:,2)-round(sum(V(:,2))/size(V,1)); V(:,3)=V(:,3)-round(sum(V(:,3))/size(V,1)); elseif strcmp(selector,\'747\') load boeing_747; V=[V(:,2) V(:,1) V(:,3)]; V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1)); V(:.
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf
singhanubhav1234
Evolution of mitochondria. Mitochondria are believed to have arisen as prokaryotic cells that got entrapped within a eukaryotic cell. This event is believed to have occurred 1.4 billion years ago. This theory is the Endosymbiotic theory of the origin of mitochondria. It states that mitochondria were probably evolved from specialized bacteria which through the phenomenon of endocytosis were incorporated in to the cytoplasm of an eukaryote. There is no experimental evidence for the above theory but circumstantial evidence has been put forward by researchers. They are., Solution Evolution of mitochondria. Mitochondria are believed to have arisen as prokaryotic cells that got entrapped within a eukaryotic cell. This event is believed to have occurred 1.4 billion years ago. This theory is the Endosymbiotic theory of the origin of mitochondria. It states that mitochondria were probably evolved from specialized bacteria which through the phenomenon of endocytosis were incorporated in to the cytoplasm of an eukaryote. There is no experimental evidence for the above theory but circumstantial evidence has been put forward by researchers. They are.,.
Evolution of mitochondria.Mitochondria are believed to have arisen.pdf
Evolution of mitochondria.Mitochondria are believed to have arisen.pdf
singhanubhav1234
D Solution D.
DSolutionD.pdf
DSolutionD.pdf
singhanubhav1234
Answer: Recombinant DNA Technology: It is the set of techniques that enables the DNA from different sources to be identified, isolated, and recombined so that new characterstics can be introduced into an organism. One of the main techniques in recombinant DNA technology is DNA cloning. The DNA cloning produces an unlimited number of copies of a particular DNA segment (from a single ancestral DNA molecule). The Recombinant DNA Technology was engineered by Stanley Norman Cohen and Herbert Boyer in 1973. The cell based DNA cloning involve following 4 steps: 1) Construction of recombinant DNA molecule: The hybrid DNA molecules are constructed by in-vitro covalant attachment (ligation) of the desired DNA fragments to a replicon. 2) Transformation: The recombinant DNA molecules are transferred into host cells, in which the chosen replicon can undergo DNA replication. 3) Selective propogation of cell clones: The targeted cells were propogated in the selective liquid medium. 4) Isolation of recombinant DNA clones: The recombinant DNA clones are selectively isolated. * The enzymes used in the recombinant DNA technology are basically of 4 types: DNA polymerase, Nucleases, Restriction Enzymes, Isoschizomers Restriction enzymes: Most naturally occuring DNA molecules are much larger than can be readily analysed in the lab. To study individual gene and individual site on DNA, the large DNA molecules must be broken into small (managable) fragments. This could be done using restriction enzymes. The restriction enzymes are bacterial enzymess that able to cut double- stranded DNA molecules (by cleaving the phosphodiester bonds) at a specific nucleotide sequence, called a restriction site. The term restriction comes from the fact that these enzymes restrict the entry of foreign DNA in the bacteria. There are some enzymes that cut a three base pair sequence while others can cut four, six, and even eight base pair target sequence in a DNA molecule, usually palindromic. The naturally occurring restriction endonucleases are categorized into four groups (Types I, II III, and IV) based on their composition and enzyme cofactor requirements, the nature of their target sequence, and the position of their DNA cleavage site relative to the target sequence. For example: the one widely used restriction enzyme, EcoRI, named because it was found in certain strain of Escherichia coli and was the first (I) such enzyme found in that species. Plasmids: Plasmid are naturally occuring cicular, extrachromosomal, autonomously replicating DNA, present in many prokaryotic and few eukaryotic organisms. These are range in size from 1 Kbp to over 300 Kbp. The cloning vectors, replicating genetic element used to carry a fragment of target DNA into a host cell for the purpose of cloning. The important features of a plasmid are as follows: Solution Answer: Recombinant DNA Technology: It is the set of techniques that enables the DNA from different sources to be identified, isolated, and recom.
AnswerRecombinant DNA Technology It is the set of techniques tha.pdf
AnswerRecombinant DNA Technology It is the set of techniques tha.pdf
singhanubhav1234
a. Major categories: 1. Chromosomal disorders: Due to numerical or physical abnormality at the chromosome level. 2. Monogenic disorders: Due to mutation in single gene 3. Complex/Multifactorial disorders: Due to mutation in one or more than one genes together with extrinsic factors. Some genetic diseases are called as complex or multifactirial because they are caused due the combined effect of more than one factors (gene mutation along with environmental factors) and therefore they are complex un nature. For example if there is mutation in TGFA gene in a pregnant mother and sge is also exposed to smoking, she will have a significant risk of having cleft lip/palate in her child. Any of the two factor alone is not sufficient to cause disaese. b. According CDC, the leading causes of death are 1.heart attacks followed by 2, cancers, 3.respiratory diseases, 4.accidents, 5.stroke, 6.Alzheimer\'s disease, 7.diabetes, 8.influenza/pneumonia, 9.nephritis/nephrotic syndrome/nephrosis and 10.suicide. Of these 1,2,3,5,6, and 7 have genetic sysceptibility and comes under complex/multifactorial disorders. 3 and 8 are infectious diseases. c. The above disease frequency ranking applies to USA, whereas in Newyork 5th is slightly higher than 4th. In World heart attack is at the top followed by respiratory diseases, HIV and cancers. Cancer is higher in USA as compared to many other parts of the world may be due to higher incidence of smoking, fast food and industrialization. Solution a. Major categories: 1. Chromosomal disorders: Due to numerical or physical abnormality at the chromosome level. 2. Monogenic disorders: Due to mutation in single gene 3. Complex/Multifactorial disorders: Due to mutation in one or more than one genes together with extrinsic factors. Some genetic diseases are called as complex or multifactirial because they are caused due the combined effect of more than one factors (gene mutation along with environmental factors) and therefore they are complex un nature. For example if there is mutation in TGFA gene in a pregnant mother and sge is also exposed to smoking, she will have a significant risk of having cleft lip/palate in her child. Any of the two factor alone is not sufficient to cause disaese. b. According CDC, the leading causes of death are 1.heart attacks followed by 2, cancers, 3.respiratory diseases, 4.accidents, 5.stroke, 6.Alzheimer\'s disease, 7.diabetes, 8.influenza/pneumonia, 9.nephritis/nephrotic syndrome/nephrosis and 10.suicide. Of these 1,2,3,5,6, and 7 have genetic sysceptibility and comes under complex/multifactorial disorders. 3 and 8 are infectious diseases. c. The above disease frequency ranking applies to USA, whereas in Newyork 5th is slightly higher than 4th. In World heart attack is at the top followed by respiratory diseases, HIV and cancers. Cancer is higher in USA as compared to many other parts of the world may be due to higher incidence of smoking, fast food and industrialization..
a. Major categories1. Chromosomal disorders Due to numerical or .pdf
a. Major categories1. Chromosomal disorders Due to numerical or .pdf
singhanubhav1234
Alcohols are organic molecules that have a very polar -OH unit somewhere. That\'s the soluble part, or the \"Like\" part that interacts with water. For instance methanol (CH3OH) or ethanol (CH3CH2OH) are infinitely soluble in water or miscible with water. As the organic molecule gets bigger, e.g., (CH3CH2CH2CH2CH2CH2CH2CH2CH2-OH) then the interactions of the other part of the molecule, or the nonpolar part of the molecule become very significant. Since these types of interactions are mostly dispersive in nature, water has a harder time disrupting those interactions to cause the solvation process to proceed. Solution Alcohols are organic molecules that have a very polar -OH unit somewhere. That\'s the soluble part, or the \"Like\" part that interacts with water. For instance methanol (CH3OH) or ethanol (CH3CH2OH) are infinitely soluble in water or miscible with water. As the organic molecule gets bigger, e.g., (CH3CH2CH2CH2CH2CH2CH2CH2CH2-OH) then the interactions of the other part of the molecule, or the nonpolar part of the molecule become very significant. Since these types of interactions are mostly dispersive in nature, water has a harder time disrupting those interactions to cause the solvation process to proceed..
Alcohols are organic molecules that have a very p.pdf
Alcohols are organic molecules that have a very p.pdf
singhanubhav1234
A NEWVIEW OF GRAVITY Entropy and Gravity may be crucial concepts for explaining roots of familiar force. Gravity may be defined as masses attract each other. To scholars you could explain that space- time is warped by mass Or that without gravity, the laws of physics would differ for people moving at changing velocities. Such a simple question, has defied a direct answer for centuries. A flurry of recent papers have examined this new idea, which mixes principles from string theory and black hole physics with basic old-fashioned thermodynamics. Nobody has expressed the gravity-as-entropy except theorist Erik Verlinde of the University of Amsterdam in an online paper(arXiv.org/abs/1001.0785v1). His recipe replicates Newton\'s law of gravitational attraction, and then with some additional mathematical seasoning he arrives at Einstein\'s general relativity, the modern and undefeated champion of gravity theories. Verlinde\'s analysis indicates that gravity emerges from physical dynamics analogous to basic thermodynamic processes. \"Using only … concepts like energy, entropy and temperature,\" he writes, \"Newton\'s laws appear naturally and practically unavoidably.\" some extending Verlinde\'s idea to encompass the history of the universe. Rapid expansion just after the Big Bang and the more recent accelerating expansion of the universe might all fit into the entropic-gravity picture of reality. Entropy means \"disorder,\" with a tendency for higher entropy taken to mean that things like to get messier any system not resupplied with useful energy reaches equilibrium, and entropy is maximized. More technically, it is a measure of how likely a system is to be in its particular configuration. Low entropy describes systems with a very improbable arrangement of their parts. Curiously, the equations relating entropy to probability are precisely the same as the math used by computer scientists to quantify information. As the molecules spread out, information about their location diminishes and entropy rises. Such loss of information--or increasing entropy--drives many natural processes, such as osmosis, the mysterious migration of water across a membrane. In 1995, Ted Jacobson of the University of Maryland demonstrated that the equations of Einstein\'s general theory of relativity could be derived from basic thermodynamic principles, who discovered parallels between ordinary thermodynamics and the physics of black holes. Bekenstein showed that a black hole has entropy, determined by all the matter and energy it has swallowed. Hawking demonstrated that black holes have a temperature. Since black holes are basically nothing more than pure gravity. In 1993 Dutch Nobel physics laureate Gerard \'t Hooft. proposed that reality shares common features with holograms, like the flashy images embedded in credit cards that store apparently three-dimensional information on a flat surface. In a similar way, \'t Hooft asserted, information about the contents in three-d.
A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf
A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf
singhanubhav1234
4. Answer is colloid. follicular cells, C cells are cells in the thyroid. Calcitonin and parathyroid hormone are synthesised by the thyroid. 5. Answer T3 and T4. the hypothalamus senses the levels of the two homones and when their circulation is low releases the thyrotropic releasing hormone which stimulates the pituitary to release TSH. 6. The androgen is the male sex hormone produced in the testes. 7. ACTH is a peptide hormone Solution 4. Answer is colloid. follicular cells, C cells are cells in the thyroid. Calcitonin and parathyroid hormone are synthesised by the thyroid. 5. Answer T3 and T4. the hypothalamus senses the levels of the two homones and when their circulation is low releases the thyrotropic releasing hormone which stimulates the pituitary to release TSH. 6. The androgen is the male sex hormone produced in the testes. 7. ACTH is a peptide hormone.
4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf
4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf
singhanubhav1234
1A) One of the best explanation for why we conform/obey in the real world is, generally people are concerned over the thinking of other people. They tend to behave in such manner that they can correlate with others in properties like behaviors, belief, attitudes and feelings. 1B) Participants obey the researcher is also based on the above explanations. The participants obey because the researchers have more knowledge and information than them and the other fact is the participants have to be in norms of research, institute or centre. So they have to obey researchers. 2A) No; such obedience is not always beneficial. There are many examples where pupils are tending to obey the researcher in such a way that they can even forget the ethical rules. Obeying societal norms and expectations sometimes create disturbing behavior. Society is made of people so the welfare of people will create welfare society. 2B) Deviant behavior is the behavior which denies the societal norms and expectations. They are not harmful always. The criminal mind from deviant behavior can be created if it is from abnormal, inappropriate or dysfunctional mental processes. This is relied to individual’s personality. Solution 1A) One of the best explanation for why we conform/obey in the real world is, generally people are concerned over the thinking of other people. They tend to behave in such manner that they can correlate with others in properties like behaviors, belief, attitudes and feelings. 1B) Participants obey the researcher is also based on the above explanations. The participants obey because the researchers have more knowledge and information than them and the other fact is the participants have to be in norms of research, institute or centre. So they have to obey researchers. 2A) No; such obedience is not always beneficial. There are many examples where pupils are tending to obey the researcher in such a way that they can even forget the ethical rules. Obeying societal norms and expectations sometimes create disturbing behavior. Society is made of people so the welfare of people will create welfare society. 2B) Deviant behavior is the behavior which denies the societal norms and expectations. They are not harmful always. The criminal mind from deviant behavior can be created if it is from abnormal, inappropriate or dysfunctional mental processes. This is relied to individual’s personality..
1A) One of the best explanation for why we conformobey in the real .pdf
1A) One of the best explanation for why we conformobey in the real .pdf
singhanubhav1234
1. Water supplies are treated with chlorine to kill pathogens. Chlorine reacts well with many other chemicals because it is a strong oxidant. What does this mean? Answer: Option 4 Because chlorine is strongly electronegative and needs one electron to fill its outer shell, it strongly pulls electrons from other substances. Explanation: Chlorine is known to be one of the most electronegative atoms of the periodic table ( with a value of approx 3 in the pauling scale). This means that it has a very strong tendancy to attract electron. Also Chlorine (Atomic number 17, configuration of electrons 2, 8, 7) has seven electrons in the valence shell so it needs one electron to fill its outer shell . 2. Tests to monitor water safety often report the number of fecal coliform bacteria found in samples. Which of the following statements accurately reflects water safety recommendations based upon fecal coliform levels? Answer : Here by mistake the first two options are exactly same, one of them probably needs to be corrected to If the level of fecal coliform bacteria is low, then the water is safe for drinking and recreational purposes. This option will be the correct option. Explanation: Fecal coliforms are bacteria which indicate that the water might have been exposed to fecal matter. They are an excellant proxy to make sure that the water doesn\'t contain any human pathogens. So if the Fecal coliforms count is low it indicates that the chances of water containing any human pathogen is also low and therefore it can be used for drinking and recreational purposes 3. When an individual has severe diarrhea, as can occur with cholera, rehydration solution with glucose, salt, sodium bicarbonate, and potassium chloride can be administered. Why is it important to use a solution like this rather than simply giving the individual water? Answer: Option 1: Diarrhea causes the loss of electrolytes, not just fluids, and it is important to replace the electrolytes as well. Glucose is transported into intestinal epithelial cells, along with sodium, by symporters. It is included as well because glucose is not sufficiently absorbed while sodium is lacking. Explanation: The answer is self explanatory 4.Vibrio cholerae is a human pathogen that causes cholera. It has an unusual shape distinctive of its genus. Considering that it does not have one of the most common bacterial shapes, what is the shape of this species? Answer Option 2 - Curved rod Explanation:Vibrio\'s unique curved rod shape is also called the \"comma\" shape. Just helps to remember it more easily 5. Legionella pneumophilia can grow in water and is transmitted in aerosols. Which of these has an infection NOT been linked to? Answer option 4 -ocean water 6. On a global scale, the most important waterborne bacterial pathogens are __________. Answer Option 4 -Vibrio cholerae and Salmonella enterica serovar Typhi 7. Food that is heavily salted or candied does not need to be refrigerated. Why not? Answer option 2 -E.
1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf
1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf
singhanubhav1234
1. stub is usually used for temporary substitute for the code that yet to be written. 2. it removes the last entry in the array. Solution 1. stub is usually used for temporary substitute for the code that yet to be written. 2. it removes the last entry in the array..
1. stub is usually used for temporary substitute for the code that y.pdf
1. stub is usually used for temporary substitute for the code that y.pdf
singhanubhav1234
measurement and evaluation in education Tests à référence normative tests à référence critériée Edumétrie Psychométrie
GHASSOUB _Seance 4_ measurement and evaluation in education_-.pptx
GHASSOUB _Seance 4_ measurement and evaluation in education_-.pptx
Abderrahim GHASSOUB
CALENDRIER ET COMPTE RENDU REUNION DIRECTION
CALENDRIER ET COMPTE RENDU REUNION DIRECTION
CALENDRIER ET COMPTE RENDU REUNION DIRECTION
frizzole
Contenu connexe
Plus de singhanubhav1234
The answer is: D. they are significantly higher than the boiling points of other compounds This is due to the stronger hydrogen bonding present Solution The answer is: D. they are significantly higher than the boiling points of other compounds This is due to the stronger hydrogen bonding present.
The answer isD. they are significantly higher than the boiling po.pdf
The answer isD. they are significantly higher than the boiling po.pdf
singhanubhav1234
Silica Fume is a very reactive pozzolana because of its chemical and physical properties. Pozzolona reacts with the Calcium Hydroxide which is by product of the hydration reaction to form compounds having cementitious properties. Hence when silica fume is not used, the calcium hydroxide (Formed after hydration reaction) remains as it is which does not have any cementitious properties. By adding Silica fume, calcium hydorxide is converted to cementitious products. Solution Silica Fume is a very reactive pozzolana because of its chemical and physical properties. Pozzolona reacts with the Calcium Hydroxide which is by product of the hydration reaction to form compounds having cementitious properties. Hence when silica fume is not used, the calcium hydroxide (Formed after hydration reaction) remains as it is which does not have any cementitious properties. By adding Silica fume, calcium hydorxide is converted to cementitious products..
Silica Fume is a very reactive pozzolana because of its chemical and.pdf
Silica Fume is a very reactive pozzolana because of its chemical and.pdf
singhanubhav1234
Problem 01: #!/usr/bin/perl use strict; use warnings; $_ = \"Let’s rent a bus!\"; s/(.)(\\w).*(\\2).*(.)$/$1$2$3$4/ ; print \"[\" ; print ; print \"]\"; exit; output : [Lee!] Solution Problem 01: #!/usr/bin/perl use strict; use warnings; $_ = \"Let’s rent a bus!\"; s/(.)(\\w).*(\\2).*(.)$/$1$2$3$4/ ; print \"[\" ; print ; print \"]\"; exit; output : [Lee!].
Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf
Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf
singhanubhav1234
enzyme\'s active site does not have the exact shape of substrate, but the substrate brings about or induces a change in the shape of the active site Solution enzyme\'s active site does not have the exact shape of substrate, but the substrate brings about or induces a change in the shape of the active site.
enzymes active site does not have the exact sha.pdf
enzymes active site does not have the exact sha.pdf
singhanubhav1234
Multicasting: It is the communication between a single sender and multiple receivers on a network. Typical uses include the updating of mobile workers from a home office and the episodic issuance of online newsletters IGMP works as: Internet Group Management Protocol is allows a host to promote its multicast group membership to adjacent switches and routers. IGMP is used by the TCP/IP protocol set to achieve dynamic multicasting When a multicast transmission initiates the software creates a multicast group. This multicast group address consists of an IP address by the first octet in the range 224 – 239 and is particular in the IP packet as the end address for this traffic. The host initiate the transmission send a message to the 224.0.0.2 address specify the multicast group address. And the switch receives this message and adds the multicast group to its table and adds the receiving port as a member of the group. PIM works as: The PIM protocol can be configured to work on IPv4 and IPv6 networks. Multicast protocols are used to carry multicast packets from one source to multiple receivers. They ease better bandwidth use and use less host and router processing and ideal for usage in applications such as video and audio. PIM is a usually used multicast routing protocol. SDN: Software Defined Networking is an upcoming architecture that is dynamic, manageable and adaptable of making it perfect for the dynamic nature of today\'s applications. Open Flow: Open Flow is enable for researchers to run experimental protocols in the campus networks we use every day. Open Flow is added as a feature to saleable Ethernet switches, routers and wireless access points and provide a regular hook to allow researchers to run experiments without require vendors to expose the inner workings of their network devices. Solution Multicasting: It is the communication between a single sender and multiple receivers on a network. Typical uses include the updating of mobile workers from a home office and the episodic issuance of online newsletters IGMP works as: Internet Group Management Protocol is allows a host to promote its multicast group membership to adjacent switches and routers. IGMP is used by the TCP/IP protocol set to achieve dynamic multicasting When a multicast transmission initiates the software creates a multicast group. This multicast group address consists of an IP address by the first octet in the range 224 – 239 and is particular in the IP packet as the end address for this traffic. The host initiate the transmission send a message to the 224.0.0.2 address specify the multicast group address. And the switch receives this message and adds the multicast group to its table and adds the receiving port as a member of the group. PIM works as: The PIM protocol can be configured to work on IPv4 and IPv6 networks. Multicast protocols are used to carry multicast packets from one source to multiple receivers. They ease better bandwidth use and use less host and route.
MulticastingIt is the communication between a single sender and m.pdf
MulticastingIt is the communication between a single sender and m.pdf
singhanubhav1234
just moved a new USB 2.0 device from a new system to an older system. The new device worked properly on the new system but doesn’t install properly on the older system. All other USB devices work properly on the older system. C. The old system’s BIOS is out-of-date and needs to be upgraded. Solution just moved a new USB 2.0 device from a new system to an older system. The new device worked properly on the new system but doesn’t install properly on the older system. All other USB devices work properly on the older system. C. The old system’s BIOS is out-of-date and needs to be upgraded..
just moved a new USB 2.0 device from a new system to an older system.pdf
just moved a new USB 2.0 device from a new system to an older system.pdf
singhanubhav1234
Introduction Few things are more aggravating to produce on a worksite than concrete. Bags of cement, sand, aggregate (gravel) and possibly other additives must be delivered to the construction area. A supply of clean water is also necessary, along with a rented concrete mixing hopper. Even after all the dusty and heavy ingredients have been loaded into the hopper, one small error in the wet/dry ratio can render an entire batch of concrete unusable. One common solution to this messy and time-consuming problem is “READY MIX CONCRETE”. Ready-mix concrete (RMC) is a ready-to-use material, with predetermined mixture of cement, sand, aggregates and water. RMC is a type of concrete manufactured in a factory according to a set recipe or as per specifications of the customer, at a centrally located batching plant. It is delivered to a worksite, often in truck mixers capable of mixing the ingredients of the concrete en route or just before delivery of the batch. This results in a precise mixture, allowing specialty concrete mixtures to be developed and implemented on construction sites. The second option available is to mix the concrete at the batching plant and deliver the mixed concrete to the site in an agitator truck, which keeps the mixed concrete in correct form. In the case of the centrally mixed type, the drum carrying the concrete revolves slowly so as to prevent the mixed concrete from \"segregation\" and prevent its stiffening due to initial set. However, in the case of the truck-mixed concrete, the batched materials (sand, gravel and cement) are carried and water is added just at the time of mixing. In this case the cement remains in contact with the wet or moist material and this phase cannot exceed the permissible period, which is normally 90 minutes. The use of the RMC is facilitated through a truck-mounted \'boom placer\' that can pump the product for ready use at multi-storied construction sites. A boom placer can pump the concrete up 80 meters. Objective - Manufacturing process of ready mix concrete. Procedure – Materials required for RMC – Admixture: A substance added to the basic concrete mixture to alter one or more properties of the concrete; i.e. fibrous materials for reinforcing, water repellent treatments, and coloring compounds. Aggregate: Inert particles (i.e. gravel, sand, and stone) added to cement and water to form concrete. Cement: Dry powder that reacts chemically with water to bind the particles of aggregate, forming concrete. Portland cement is typically used in concrete production. Fly ash: Fly ash is a by-product from coal-fired electricity generating power plants. The coal used in these power plants is mainly composed of combustible elements such as carbon, hydrogen and oxygen (nitrogen and sulfur being minor elements), and non-combustible impurities (10 to 40%) usually present in the form of clay, shale, quartz, feldspar and limestone. As the coal travels through the high-temperature zone in the furnace, the combus.
IntroductionFew things are more aggravating to produce on a worksi.pdf
IntroductionFew things are more aggravating to produce on a worksi.pdf
singhanubhav1234
D) Rb Solution D) Rb.
D) Rb Solution D) Rb .pdf
D) Rb Solution D) Rb .pdf
singhanubhav1234
idk Solution idk.
idkSolutionidk.pdf
idkSolutionidk.pdf
singhanubhav1234
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,selector,varargin); % operate trajectory2(x,y,z,pitcher,roll,yaw,scale_factor,step,[selector,SoR]) % % % x,y,z center mechanical phenomenon (vector) [m] % % pitcher,roll,yaw euler\'s angles [rad] % % issue|multiplier|multiplier factor} standardisation factor [scalar] % (related to body craft dimension) % % step angle sampling issue [scalar] % (the points variety between 2 body models) % % chooseor select the body model [string] % % gripen JAS thirty-nine Gripen heli chopper % mig Mig ah64 Apache chopper % Felis catus Tomcat(Default) a10 % jet Generic jet cessna Cessna % 747 Boeing 747 airplane Generic airplane % md90 MD90 jet shuttle space vehicle % dc10 DC-10 jet % % elective INPUT: % % % read sets the camera read. Use Matlab\'s \"viewer\" as argument to reprocess this read. % % Note: % % Refernce System: % X body- The axial force on the X body axis is % positive on forward; the momentum around X body % is positive roll clockwise as viewered from behind; % Y body- The facet force on the Y body axis is % positive on the correct wing; the instant around Y % body is positive in pitcher up; % Z body- the conventional force on the Z body axis is % positive down; the instant around Z body is positive % roll clockwise as viewered from higher than. % % ******************************* % operate Version three.0 % 7/08/2004 (dd/mm/yyyy) % Valerio Scordamaglia % v.scordamaglia@tiscali.it % ******************************* if nargin<9 disp(\' Wrong:\'); disp(\' Wrong: Invalid variety Inputs!\'); M=0; return; end if (len(x)~=len(y))|(len(x)~=len(z))|(len(y)~=len(z)) disp(\' Wrong:\'); disp(\' Uncorrect Dimension of the middle mechanical phenomenon Vectors. Please Check the size\'); M=0; return; end if ((len(pitcher)~=len(roll))||(len(pitcher)~=len(yaw))||(len(roll)~=len(yaw))) disp(\' Wrong:\'); disp(\' Uncorrect Dimension of the euler\'\'s angle Vectors. Please Check the size\'); M=0; return; end if len(pitcher)~=len(x) disp(\' Wrong:\'); disp(\' Size match between euler\'\'s angle vectors and center mechanical phenomenon vectors\'); M=0; return end if step>=len(x) disp(\' Wrong:\'); disp(\' angle samplig reckon of vary. scale back step\'); M=0; return end if step<1 step=1; end if nargin==10 theViewer=cell2mat(varargin(1)); end if nargin>10 disp(\'Too several inputs arguments\'); M=0; return end if nargin<10 theViewer=[82.50 2]; end mov=nargout; cur_dir=pwd; if strcmp(selector,\'shuttle\') load shuttle; V=[-V(:,2) V(:,1) V(:,3)]; V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1)); V(:,2)=V(:,2)-round(sum(V(:,2))/size(V,1)); V(:,3)=V(:,3)-round(sum(V(:,3))/size(V,1)); elseif strcmp(selector,\'helicopter\') load helicopter; V=[-V(:,2) V(:,1) V(:,3)]; V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1)); V(:,2)=V(:,2)-round(sum(V(:,2))/size(V,1)); V(:,3)=V(:,3)-round(sum(V(:,3))/size(V,1)); elseif strcmp(selector,\'747\') load boeing_747; V=[V(:,2) V(:,1) V(:,3)]; V(:,1)=V(:,1)-round(sum(V(:,1))/size(V,1)); V(:.
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf
singhanubhav1234
Evolution of mitochondria. Mitochondria are believed to have arisen as prokaryotic cells that got entrapped within a eukaryotic cell. This event is believed to have occurred 1.4 billion years ago. This theory is the Endosymbiotic theory of the origin of mitochondria. It states that mitochondria were probably evolved from specialized bacteria which through the phenomenon of endocytosis were incorporated in to the cytoplasm of an eukaryote. There is no experimental evidence for the above theory but circumstantial evidence has been put forward by researchers. They are., Solution Evolution of mitochondria. Mitochondria are believed to have arisen as prokaryotic cells that got entrapped within a eukaryotic cell. This event is believed to have occurred 1.4 billion years ago. This theory is the Endosymbiotic theory of the origin of mitochondria. It states that mitochondria were probably evolved from specialized bacteria which through the phenomenon of endocytosis were incorporated in to the cytoplasm of an eukaryote. There is no experimental evidence for the above theory but circumstantial evidence has been put forward by researchers. They are.,.
Evolution of mitochondria.Mitochondria are believed to have arisen.pdf
Evolution of mitochondria.Mitochondria are believed to have arisen.pdf
singhanubhav1234
D Solution D.
DSolutionD.pdf
DSolutionD.pdf
singhanubhav1234
Answer: Recombinant DNA Technology: It is the set of techniques that enables the DNA from different sources to be identified, isolated, and recombined so that new characterstics can be introduced into an organism. One of the main techniques in recombinant DNA technology is DNA cloning. The DNA cloning produces an unlimited number of copies of a particular DNA segment (from a single ancestral DNA molecule). The Recombinant DNA Technology was engineered by Stanley Norman Cohen and Herbert Boyer in 1973. The cell based DNA cloning involve following 4 steps: 1) Construction of recombinant DNA molecule: The hybrid DNA molecules are constructed by in-vitro covalant attachment (ligation) of the desired DNA fragments to a replicon. 2) Transformation: The recombinant DNA molecules are transferred into host cells, in which the chosen replicon can undergo DNA replication. 3) Selective propogation of cell clones: The targeted cells were propogated in the selective liquid medium. 4) Isolation of recombinant DNA clones: The recombinant DNA clones are selectively isolated. * The enzymes used in the recombinant DNA technology are basically of 4 types: DNA polymerase, Nucleases, Restriction Enzymes, Isoschizomers Restriction enzymes: Most naturally occuring DNA molecules are much larger than can be readily analysed in the lab. To study individual gene and individual site on DNA, the large DNA molecules must be broken into small (managable) fragments. This could be done using restriction enzymes. The restriction enzymes are bacterial enzymess that able to cut double- stranded DNA molecules (by cleaving the phosphodiester bonds) at a specific nucleotide sequence, called a restriction site. The term restriction comes from the fact that these enzymes restrict the entry of foreign DNA in the bacteria. There are some enzymes that cut a three base pair sequence while others can cut four, six, and even eight base pair target sequence in a DNA molecule, usually palindromic. The naturally occurring restriction endonucleases are categorized into four groups (Types I, II III, and IV) based on their composition and enzyme cofactor requirements, the nature of their target sequence, and the position of their DNA cleavage site relative to the target sequence. For example: the one widely used restriction enzyme, EcoRI, named because it was found in certain strain of Escherichia coli and was the first (I) such enzyme found in that species. Plasmids: Plasmid are naturally occuring cicular, extrachromosomal, autonomously replicating DNA, present in many prokaryotic and few eukaryotic organisms. These are range in size from 1 Kbp to over 300 Kbp. The cloning vectors, replicating genetic element used to carry a fragment of target DNA into a host cell for the purpose of cloning. The important features of a plasmid are as follows: Solution Answer: Recombinant DNA Technology: It is the set of techniques that enables the DNA from different sources to be identified, isolated, and recom.
AnswerRecombinant DNA Technology It is the set of techniques tha.pdf
AnswerRecombinant DNA Technology It is the set of techniques tha.pdf
singhanubhav1234
a. Major categories: 1. Chromosomal disorders: Due to numerical or physical abnormality at the chromosome level. 2. Monogenic disorders: Due to mutation in single gene 3. Complex/Multifactorial disorders: Due to mutation in one or more than one genes together with extrinsic factors. Some genetic diseases are called as complex or multifactirial because they are caused due the combined effect of more than one factors (gene mutation along with environmental factors) and therefore they are complex un nature. For example if there is mutation in TGFA gene in a pregnant mother and sge is also exposed to smoking, she will have a significant risk of having cleft lip/palate in her child. Any of the two factor alone is not sufficient to cause disaese. b. According CDC, the leading causes of death are 1.heart attacks followed by 2, cancers, 3.respiratory diseases, 4.accidents, 5.stroke, 6.Alzheimer\'s disease, 7.diabetes, 8.influenza/pneumonia, 9.nephritis/nephrotic syndrome/nephrosis and 10.suicide. Of these 1,2,3,5,6, and 7 have genetic sysceptibility and comes under complex/multifactorial disorders. 3 and 8 are infectious diseases. c. The above disease frequency ranking applies to USA, whereas in Newyork 5th is slightly higher than 4th. In World heart attack is at the top followed by respiratory diseases, HIV and cancers. Cancer is higher in USA as compared to many other parts of the world may be due to higher incidence of smoking, fast food and industrialization. Solution a. Major categories: 1. Chromosomal disorders: Due to numerical or physical abnormality at the chromosome level. 2. Monogenic disorders: Due to mutation in single gene 3. Complex/Multifactorial disorders: Due to mutation in one or more than one genes together with extrinsic factors. Some genetic diseases are called as complex or multifactirial because they are caused due the combined effect of more than one factors (gene mutation along with environmental factors) and therefore they are complex un nature. For example if there is mutation in TGFA gene in a pregnant mother and sge is also exposed to smoking, she will have a significant risk of having cleft lip/palate in her child. Any of the two factor alone is not sufficient to cause disaese. b. According CDC, the leading causes of death are 1.heart attacks followed by 2, cancers, 3.respiratory diseases, 4.accidents, 5.stroke, 6.Alzheimer\'s disease, 7.diabetes, 8.influenza/pneumonia, 9.nephritis/nephrotic syndrome/nephrosis and 10.suicide. Of these 1,2,3,5,6, and 7 have genetic sysceptibility and comes under complex/multifactorial disorders. 3 and 8 are infectious diseases. c. The above disease frequency ranking applies to USA, whereas in Newyork 5th is slightly higher than 4th. In World heart attack is at the top followed by respiratory diseases, HIV and cancers. Cancer is higher in USA as compared to many other parts of the world may be due to higher incidence of smoking, fast food and industrialization..
a. Major categories1. Chromosomal disorders Due to numerical or .pdf
a. Major categories1. Chromosomal disorders Due to numerical or .pdf
singhanubhav1234
Alcohols are organic molecules that have a very polar -OH unit somewhere. That\'s the soluble part, or the \"Like\" part that interacts with water. For instance methanol (CH3OH) or ethanol (CH3CH2OH) are infinitely soluble in water or miscible with water. As the organic molecule gets bigger, e.g., (CH3CH2CH2CH2CH2CH2CH2CH2CH2-OH) then the interactions of the other part of the molecule, or the nonpolar part of the molecule become very significant. Since these types of interactions are mostly dispersive in nature, water has a harder time disrupting those interactions to cause the solvation process to proceed. Solution Alcohols are organic molecules that have a very polar -OH unit somewhere. That\'s the soluble part, or the \"Like\" part that interacts with water. For instance methanol (CH3OH) or ethanol (CH3CH2OH) are infinitely soluble in water or miscible with water. As the organic molecule gets bigger, e.g., (CH3CH2CH2CH2CH2CH2CH2CH2CH2-OH) then the interactions of the other part of the molecule, or the nonpolar part of the molecule become very significant. Since these types of interactions are mostly dispersive in nature, water has a harder time disrupting those interactions to cause the solvation process to proceed..
Alcohols are organic molecules that have a very p.pdf
Alcohols are organic molecules that have a very p.pdf
singhanubhav1234
A NEWVIEW OF GRAVITY Entropy and Gravity may be crucial concepts for explaining roots of familiar force. Gravity may be defined as masses attract each other. To scholars you could explain that space- time is warped by mass Or that without gravity, the laws of physics would differ for people moving at changing velocities. Such a simple question, has defied a direct answer for centuries. A flurry of recent papers have examined this new idea, which mixes principles from string theory and black hole physics with basic old-fashioned thermodynamics. Nobody has expressed the gravity-as-entropy except theorist Erik Verlinde of the University of Amsterdam in an online paper(arXiv.org/abs/1001.0785v1). His recipe replicates Newton\'s law of gravitational attraction, and then with some additional mathematical seasoning he arrives at Einstein\'s general relativity, the modern and undefeated champion of gravity theories. Verlinde\'s analysis indicates that gravity emerges from physical dynamics analogous to basic thermodynamic processes. \"Using only … concepts like energy, entropy and temperature,\" he writes, \"Newton\'s laws appear naturally and practically unavoidably.\" some extending Verlinde\'s idea to encompass the history of the universe. Rapid expansion just after the Big Bang and the more recent accelerating expansion of the universe might all fit into the entropic-gravity picture of reality. Entropy means \"disorder,\" with a tendency for higher entropy taken to mean that things like to get messier any system not resupplied with useful energy reaches equilibrium, and entropy is maximized. More technically, it is a measure of how likely a system is to be in its particular configuration. Low entropy describes systems with a very improbable arrangement of their parts. Curiously, the equations relating entropy to probability are precisely the same as the math used by computer scientists to quantify information. As the molecules spread out, information about their location diminishes and entropy rises. Such loss of information--or increasing entropy--drives many natural processes, such as osmosis, the mysterious migration of water across a membrane. In 1995, Ted Jacobson of the University of Maryland demonstrated that the equations of Einstein\'s general theory of relativity could be derived from basic thermodynamic principles, who discovered parallels between ordinary thermodynamics and the physics of black holes. Bekenstein showed that a black hole has entropy, determined by all the matter and energy it has swallowed. Hawking demonstrated that black holes have a temperature. Since black holes are basically nothing more than pure gravity. In 1993 Dutch Nobel physics laureate Gerard \'t Hooft. proposed that reality shares common features with holograms, like the flashy images embedded in credit cards that store apparently three-dimensional information on a flat surface. In a similar way, \'t Hooft asserted, information about the contents in three-d.
A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf
A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf
singhanubhav1234
4. Answer is colloid. follicular cells, C cells are cells in the thyroid. Calcitonin and parathyroid hormone are synthesised by the thyroid. 5. Answer T3 and T4. the hypothalamus senses the levels of the two homones and when their circulation is low releases the thyrotropic releasing hormone which stimulates the pituitary to release TSH. 6. The androgen is the male sex hormone produced in the testes. 7. ACTH is a peptide hormone Solution 4. Answer is colloid. follicular cells, C cells are cells in the thyroid. Calcitonin and parathyroid hormone are synthesised by the thyroid. 5. Answer T3 and T4. the hypothalamus senses the levels of the two homones and when their circulation is low releases the thyrotropic releasing hormone which stimulates the pituitary to release TSH. 6. The androgen is the male sex hormone produced in the testes. 7. ACTH is a peptide hormone.
4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf
4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf
singhanubhav1234
1A) One of the best explanation for why we conform/obey in the real world is, generally people are concerned over the thinking of other people. They tend to behave in such manner that they can correlate with others in properties like behaviors, belief, attitudes and feelings. 1B) Participants obey the researcher is also based on the above explanations. The participants obey because the researchers have more knowledge and information than them and the other fact is the participants have to be in norms of research, institute or centre. So they have to obey researchers. 2A) No; such obedience is not always beneficial. There are many examples where pupils are tending to obey the researcher in such a way that they can even forget the ethical rules. Obeying societal norms and expectations sometimes create disturbing behavior. Society is made of people so the welfare of people will create welfare society. 2B) Deviant behavior is the behavior which denies the societal norms and expectations. They are not harmful always. The criminal mind from deviant behavior can be created if it is from abnormal, inappropriate or dysfunctional mental processes. This is relied to individual’s personality. Solution 1A) One of the best explanation for why we conform/obey in the real world is, generally people are concerned over the thinking of other people. They tend to behave in such manner that they can correlate with others in properties like behaviors, belief, attitudes and feelings. 1B) Participants obey the researcher is also based on the above explanations. The participants obey because the researchers have more knowledge and information than them and the other fact is the participants have to be in norms of research, institute or centre. So they have to obey researchers. 2A) No; such obedience is not always beneficial. There are many examples where pupils are tending to obey the researcher in such a way that they can even forget the ethical rules. Obeying societal norms and expectations sometimes create disturbing behavior. Society is made of people so the welfare of people will create welfare society. 2B) Deviant behavior is the behavior which denies the societal norms and expectations. They are not harmful always. The criminal mind from deviant behavior can be created if it is from abnormal, inappropriate or dysfunctional mental processes. This is relied to individual’s personality..
1A) One of the best explanation for why we conformobey in the real .pdf
1A) One of the best explanation for why we conformobey in the real .pdf
singhanubhav1234
1. Water supplies are treated with chlorine to kill pathogens. Chlorine reacts well with many other chemicals because it is a strong oxidant. What does this mean? Answer: Option 4 Because chlorine is strongly electronegative and needs one electron to fill its outer shell, it strongly pulls electrons from other substances. Explanation: Chlorine is known to be one of the most electronegative atoms of the periodic table ( with a value of approx 3 in the pauling scale). This means that it has a very strong tendancy to attract electron. Also Chlorine (Atomic number 17, configuration of electrons 2, 8, 7) has seven electrons in the valence shell so it needs one electron to fill its outer shell . 2. Tests to monitor water safety often report the number of fecal coliform bacteria found in samples. Which of the following statements accurately reflects water safety recommendations based upon fecal coliform levels? Answer : Here by mistake the first two options are exactly same, one of them probably needs to be corrected to If the level of fecal coliform bacteria is low, then the water is safe for drinking and recreational purposes. This option will be the correct option. Explanation: Fecal coliforms are bacteria which indicate that the water might have been exposed to fecal matter. They are an excellant proxy to make sure that the water doesn\'t contain any human pathogens. So if the Fecal coliforms count is low it indicates that the chances of water containing any human pathogen is also low and therefore it can be used for drinking and recreational purposes 3. When an individual has severe diarrhea, as can occur with cholera, rehydration solution with glucose, salt, sodium bicarbonate, and potassium chloride can be administered. Why is it important to use a solution like this rather than simply giving the individual water? Answer: Option 1: Diarrhea causes the loss of electrolytes, not just fluids, and it is important to replace the electrolytes as well. Glucose is transported into intestinal epithelial cells, along with sodium, by symporters. It is included as well because glucose is not sufficiently absorbed while sodium is lacking. Explanation: The answer is self explanatory 4.Vibrio cholerae is a human pathogen that causes cholera. It has an unusual shape distinctive of its genus. Considering that it does not have one of the most common bacterial shapes, what is the shape of this species? Answer Option 2 - Curved rod Explanation:Vibrio\'s unique curved rod shape is also called the \"comma\" shape. Just helps to remember it more easily 5. Legionella pneumophilia can grow in water and is transmitted in aerosols. Which of these has an infection NOT been linked to? Answer option 4 -ocean water 6. On a global scale, the most important waterborne bacterial pathogens are __________. Answer Option 4 -Vibrio cholerae and Salmonella enterica serovar Typhi 7. Food that is heavily salted or candied does not need to be refrigerated. Why not? Answer option 2 -E.
1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf
1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf
singhanubhav1234
1. stub is usually used for temporary substitute for the code that yet to be written. 2. it removes the last entry in the array. Solution 1. stub is usually used for temporary substitute for the code that yet to be written. 2. it removes the last entry in the array..
1. stub is usually used for temporary substitute for the code that y.pdf
1. stub is usually used for temporary substitute for the code that y.pdf
singhanubhav1234
Plus de singhanubhav1234
(20)
The answer isD. they are significantly higher than the boiling po.pdf
The answer isD. they are significantly higher than the boiling po.pdf
Silica Fume is a very reactive pozzolana because of its chemical and.pdf
Silica Fume is a very reactive pozzolana because of its chemical and.pdf
Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf
Problem 01 #!usrbinperl use strict; use warnings; $_ = .pdf
enzymes active site does not have the exact sha.pdf
enzymes active site does not have the exact sha.pdf
MulticastingIt is the communication between a single sender and m.pdf
MulticastingIt is the communication between a single sender and m.pdf
just moved a new USB 2.0 device from a new system to an older system.pdf
just moved a new USB 2.0 device from a new system to an older system.pdf
IntroductionFew things are more aggravating to produce on a worksi.pdf
IntroductionFew things are more aggravating to produce on a worksi.pdf
D) Rb Solution D) Rb .pdf
D) Rb Solution D) Rb .pdf
idkSolutionidk.pdf
idkSolutionidk.pdf
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf
function [M]=trajectory3(x,y,z,pitcher,roll,yaw,scale_factor,step,se.pdf
Evolution of mitochondria.Mitochondria are believed to have arisen.pdf
Evolution of mitochondria.Mitochondria are believed to have arisen.pdf
DSolutionD.pdf
DSolutionD.pdf
AnswerRecombinant DNA Technology It is the set of techniques tha.pdf
AnswerRecombinant DNA Technology It is the set of techniques tha.pdf
a. Major categories1. Chromosomal disorders Due to numerical or .pdf
a. Major categories1. Chromosomal disorders Due to numerical or .pdf
Alcohols are organic molecules that have a very p.pdf
Alcohols are organic molecules that have a very p.pdf
A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf
A NEWVIEW OF GRAVITYEntropy and Gravity may be crucial concepts fo.pdf
4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf
4. Answer is colloid. follicular cells, C cells are cells in the thy.pdf
1A) One of the best explanation for why we conformobey in the real .pdf
1A) One of the best explanation for why we conformobey in the real .pdf
1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf
1. Water supplies are treated with chlorine to kill pathogens. Chlor.pdf
1. stub is usually used for temporary substitute for the code that y.pdf
1. stub is usually used for temporary substitute for the code that y.pdf
Dernier
measurement and evaluation in education Tests à référence normative tests à référence critériée Edumétrie Psychométrie
GHASSOUB _Seance 4_ measurement and evaluation in education_-.pptx
GHASSOUB _Seance 4_ measurement and evaluation in education_-.pptx
Abderrahim GHASSOUB
CALENDRIER ET COMPTE RENDU REUNION DIRECTION
CALENDRIER ET COMPTE RENDU REUNION DIRECTION
CALENDRIER ET COMPTE RENDU REUNION DIRECTION
frizzole
Les phases d'analyse des parties prenantes
Les phases d'analyse des parties prenantes
Les phases d'analyse des parties prenantes
NimonLANGUIE
Ce cours de 52 slides s'adresse aux étudiants en licence 3 de génie civil en route. Il est composé de 4 chapitres que sont : I- Description matérielle d’une chaussée II- Différents types de structure de chaussées III- Description fonctionnelle des différentes couches IV- Fonction et endommagement des différents types de chaussée. Ce document vous permettra de vous initier au domaine routier et de comprendre ce qui s'y fait.
Chapitre3-Classififcation des structures de chaussu00E9e.pptx
Chapitre3-Classififcation des structures de chaussu00E9e.pptx
ModesteTiemele
cours recherche d'emploi
ilide.info-cours-recherche-d-emploi-pr_aa839df7439dd234c803551c86e0197c.pdf
ilide.info-cours-recherche-d-emploi-pr_aa839df7439dd234c803551c86e0197c.pdf
ssuser6041d32
Texte Texte avec différentes critiques positives, négatives ou mitigées à travailler avec le niveau A2
Texte avec différentes critiques positives, négatives ou mitigées
Texte avec différentes critiques positives, négatives ou mitigées
LeBaobabBleu1
Methode 5S
Methode 5S - support de formation -.pdf
Methode 5S - support de formation -.pdf
sciencedufutur
L'histoire du prêtre belge et sa mission à la léproserie de Molokai
Saint Damien, missionnaire auprès des lépreux de Molokai, Hawaï.pptx
Saint Damien, missionnaire auprès des lépreux de Molokai, Hawaï.pptx
Martin M Flynn
Puisse la neuvaine de préparation à la fête de Pentecôte renouveler notre soif de vivre chaque moment dans l’Esprit Saint, de le laisser entrer dans tous les espaces intérieurs de notre cœur, pour qu’il y vive et y règne avec le Père et le Fils, pour notre plus grand bonheur et la plus grande gloire de Dieu.
Neuvaine de la Pentecôte avec des textes de saint Jean Eudes
Neuvaine de la Pentecôte avec des textes de saint Jean Eudes
Unidad de Espiritualidad Eudista
measurement and evaluation in education Psychometry- testing-test design
GHASSOUB _Seance 3_ measurement and evaluation in education.pptx
GHASSOUB _Seance 3_ measurement and evaluation in education.pptx
Abderrahim GHASSOUB
Echos libraries Burkina Faso
Echos libraries Burkina Faso newsletter 2024
Echos libraries Burkina Faso newsletter 2024
Friends of African Village Libraries
Réunion des directrices et directeurs de la circonscription de Jonzac le 15 mai 2024 au lycée Jean Hyppolite de Jonzac. Enjeux de la protection de l'enfance
Réunion des directeurs de Jonzac - 15 mai 2024
Réunion des directeurs de Jonzac - 15 mai 2024
IEN_Jonzac
telecommunication et transport
Télécommunication et transport .pdfcours
Télécommunication et transport .pdfcours
halima98ahlmohamed
Fiche de vocabulaire pour faire une appréciation (niveau A2)
Fiche de vocabulaire pour faire une appréciation
Fiche de vocabulaire pour faire une appréciation
LeBaobabBleu1
Film franáis réalisé par Marie Amachoukelli et tourné au Cap Vert et en France.
Àma Gloria.pptx Un film tourné au Cap Vert et en France
Àma Gloria.pptx Un film tourné au Cap Vert et en France
Txaruka
Cours Officiel POO Python
python-Cours Officiel POO Python-m103.pdf
python-Cours Officiel POO Python-m103.pdf
trendingv83
Dernier
(16)
GHASSOUB _Seance 4_ measurement and evaluation in education_-.pptx
GHASSOUB _Seance 4_ measurement and evaluation in education_-.pptx
CALENDRIER ET COMPTE RENDU REUNION DIRECTION
CALENDRIER ET COMPTE RENDU REUNION DIRECTION
Les phases d'analyse des parties prenantes
Les phases d'analyse des parties prenantes
Chapitre3-Classififcation des structures de chaussu00E9e.pptx
Chapitre3-Classififcation des structures de chaussu00E9e.pptx
ilide.info-cours-recherche-d-emploi-pr_aa839df7439dd234c803551c86e0197c.pdf
ilide.info-cours-recherche-d-emploi-pr_aa839df7439dd234c803551c86e0197c.pdf
Texte avec différentes critiques positives, négatives ou mitigées
Texte avec différentes critiques positives, négatives ou mitigées
Methode 5S - support de formation -.pdf
Methode 5S - support de formation -.pdf
Saint Damien, missionnaire auprès des lépreux de Molokai, Hawaï.pptx
Saint Damien, missionnaire auprès des lépreux de Molokai, Hawaï.pptx
Neuvaine de la Pentecôte avec des textes de saint Jean Eudes
Neuvaine de la Pentecôte avec des textes de saint Jean Eudes
GHASSOUB _Seance 3_ measurement and evaluation in education.pptx
GHASSOUB _Seance 3_ measurement and evaluation in education.pptx
Echos libraries Burkina Faso newsletter 2024
Echos libraries Burkina Faso newsletter 2024
Réunion des directeurs de Jonzac - 15 mai 2024
Réunion des directeurs de Jonzac - 15 mai 2024
Télécommunication et transport .pdfcours
Télécommunication et transport .pdfcours
Fiche de vocabulaire pour faire une appréciation
Fiche de vocabulaire pour faire une appréciation
Àma Gloria.pptx Un film tourné au Cap Vert et en France
Àma Gloria.pptx Un film tourné au Cap Vert et en France
python-Cours Officiel POO Python-m103.pdf
python-Cours Officiel POO Python-m103.pdf
256Solution256.pdf
1.
256 Solution 256
Télécharger maintenant