Crown wf3000 series forklift service repair manualudjdkdkdmm
1. The document is a service manual for the WF3000 series forklift trucks that provides information on maintenance, repair, troubleshooting, and specifications for the trucks.
2. It includes sections covering lubrication and adjustments, hydraulics, drive unit, electrics, brakes, steering, mast, cylinders, and electrical diagrams.
3. The manual provides maintenance technicians with the information needed to service the trucks, such as recommended lubricants, component locations, repair instructions, and electrical schematics.
Crown we2000 series forklift service repair manualudjdkdkdmm
This document is a service and parts manual for a series of trucks. It contains sections on maintenance, lubrication, adjustments, hydraulics, drive units, wheels, tires, electrical systems, and components. The manual provides instructions on inspection schedules, maintenance plans, component access, lubrication points, and repair procedures. It also includes schematics, diagrams, part numbers, and other technical information needed for service and repairs.
Contenu connexe
Similaire à Crown tsp6000 series turret order picker service repair manual
Crown wf3000 series forklift service repair manualudjdkdkdmm
1. The document is a service manual for the WF3000 series forklift trucks that provides information on maintenance, repair, troubleshooting, and specifications for the trucks.
2. It includes sections covering lubrication and adjustments, hydraulics, drive unit, electrics, brakes, steering, mast, cylinders, and electrical diagrams.
3. The manual provides maintenance technicians with the information needed to service the trucks, such as recommended lubricants, component locations, repair instructions, and electrical schematics.
Crown we2000 series forklift service repair manualudjdkdkdmm
This document is a service and parts manual for a series of trucks. It contains sections on maintenance, lubrication, adjustments, hydraulics, drive units, wheels, tires, electrical systems, and components. The manual provides instructions on inspection schedules, maintenance plans, component access, lubrication points, and repair procedures. It also includes schematics, diagrams, part numbers, and other technical information needed for service and repairs.
Crown wave50 work assit vehicle service repair manualudjdkdkdmm
This document is a maintenance manual for the WAVE 50 series work assist vehicle. It provides instructions for general maintenance, cleaning, safety procedures, and maintenance of specific vehicle systems. Systems covered include the battery, hydraulics, mast, drive unit, and other mechanical components. The manual includes lubrication guidelines, component locations, troubleshooting information, and torque specifications for repairs.
Crown sx3000 series forklift service repair manualudjdkdkdmm
This document provides service and maintenance information for the SX3000 Series truck. It begins with safety notes and warnings for working on the truck. The document then provides an introduction and details on model numbers. Most of the subsequent sections provide removal and repair instructions for various truck components, including lubrication/maintenance, hydraulics, the drive unit, electrics, brakes, the control handle, mast, cylinders, and diagrams. Torque specifications and lubrication points/intervals are also included.
Crown st3000 series forklift service repair manualudjdkdkdmm
This document provides service information for the ST3000 series truck, including safety information, an introduction, model numbers, lubrication and maintenance procedures, hydraulic and electrical systems, brakes, controls, mast, forks, cylinders, and diagrams. It contains information on component access, recommended lubricants, inspection and maintenance schedules, hydraulic and electrical components, systems and troubleshooting. The document is divided into sections covering various truck systems and components to assist with maintenance, repair, and safe operation of the ST3000 series truck.
Crown sc3200 series forklift service repair manualudjdkdkdmm
1. The document provides maintenance instructions for the SC3200 series truck. It details safety procedures, component descriptions, lubrication and inspection schedules, repair procedures, and torque specifications.
2. The table of contents lists 7 chapters covering topics such as hydraulics, drive systems, electrics, brakes, steering, mast, and forks. Diagrams and part numbers are provided for components.
3. Inspections and maintenance are divided into daily, monthly, quarterly, biannual, and annual schedules. Repair procedures include disassembling and overhauling components like pumps, motors, gears, cylinders and providing assembly instructions.
Caterpillar cat 324 e l excavator (prefix kte) service repair manual (kte0000...udjdkdkdmm
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components and springs to avoid injury.
Caterpillar cat 324 e l excavator (prefix jcz) service repair manual (jcz0000...udjdkdkdmm
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process involves removing 28 components from the travel motor including the head, brake piston, plates, springs and seals. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate keys and piston marks. Special tools are required for tasks like removing races and seals.
Caterpillar cat 324 e excavator (prefix kte) service repair manual (kte00001 ...udjdkdkdmm
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings onto the housing, shaft and barrel assembly in the correct order. Special tools are required to install some parts and apply locking agents or lubricants where specified. Proper assembly sequence and special handling of spring loaded parts is important to prevent injury.
Caterpillar cat 324 e excavator (prefix jcz) service repair manual (jcz00001 ...udjdkdkdmm
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs and seals. The assembly section outlines 29 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
Caterpillar cat 324 d ln excavator (prefix trh) service repair manual (trh000...udjdkdkdmm
This document provides the disassembly and assembly procedures for a 324D LN excavator travel motor. The disassembly procedure is outlined in 28 steps and removes components like the motor head, seals, springs, plates, and bearings. The assembly procedure is outlined in 15 steps and instructs technicians to install components like seals, bearings, plates, springs and balls back into their original positions on the travel motor housing and barrel assembly. Cleanliness is emphasized throughout the process.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...udjdkdkdmm
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar cat 324 d ln excavator (prefix btk) service repair manual (btk000...udjdkdkdmm
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D L and 324D LN. The disassembly procedure is outlined in 28 steps and includes removing components like the head, seals, springs, plates, and bearings. The assembly procedure reverses the disassembly steps in 15 illustrated steps and provides notes on cleaning, applying thread lock compound and lubricant, and ensuring parts are returned to their original positions.
Caterpillar cat 324 d l excavator (prefix tsn) service repair manual (tsn0000...udjdkdkdmm
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D and 324D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure instructs to install components in the reverse order and notes that all seals and gaskets must be replaced, parts must be cleaned before assembly, and lubricant applied to components. Proper tooling is required for tasks like removing retaining rings and installing seals.
Caterpillar cat 324 d l excavator (prefix trh) service repair manual (trh0000...udjdkdkdmm
This document provides the disassembly and assembly procedures for a 324D LN excavator travel motor. It includes 28 steps for disassembly that remove components like the motor head, seals, plates, discs, bearings, and housing pieces. The 28 steps for assembly install these same components in reverse order and include notes about cleaning, applying lubricant, and ensuring correct part positioning. Tools required are also listed.
Caterpillar cat 324 d l excavator (prefix sym) service repair manual (sym0000...udjdkdkdmm
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. The 31 step process involves removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are required to remove retaining rings, pins and other secured pieces. Cleanliness is important to prevent dirt contamination during disassembly.
Caterpillar cat 324 d l excavator (prefix pyt) service repair manual (pyt0000...udjdkdkdmm
This document provides instructions for disassembling and assembling the final drive of a 324D L Excavator. The assembly procedure involves 37 steps and requires various tools. Key steps include pressing bearings into housings, measuring bearing preload, installing seals using special tools, and applying anti-seize compound to surfaces. Cleanliness is emphasized throughout to prevent contamination.
Caterpillar cat 324 d l excavator (prefix mnd) service repair manual (mnd0000...udjdkdkdmm
The document provides instructions for disassembling the final drive of a 324D excavator. It lists required tools and a multi-step process involving removing bolts, covers, gears, seals, and other components. Individual parts are removed using various tools, with notes on alignment marks, part weights, and cleaning requirements. The carrier assembly, ring gears, and other internal parts are then dismantled through steps like driving out pins and removing thrust washers and gears.
Caterpillar cat 324 d l excavator (prefix lab) service repair manual (lab0000...udjdkdkdmm
This document provides the disassembly procedure for the final drive of a 324D L Excavator. It begins by outlining the required tools. The procedure then lists 32 steps to fully disassemble the final drive. These steps include removing covers, gears, shafts, seals, housings, and other internal components. Special tools and multiple people are required for removing some heavier parts. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Bomag bw 216 dh 3 single drum roller service repair manualudjdkdkdmm
This document provides technical information and specifications for BOMAG single drum rollers models BW 216 D-3, BW 216 DH-3/PDH-3, BW 219 DH-3/PDH-3, and BW 225 D-3/PD-3. It includes details on the engine, travel pump, drum drive motor, vibration pump, steering pump, axle, and other components. Filling capacities and technical specifications are also listed. The document serves as a reference for maintenance and repair of these roller models.
21. SAFETY
Symbols Used in the Manual
3
TSP6000 MA-1961
Rev. 1 04/2006
Symbols Used in the Manual
Safety Symbols
To provide guidance and clearly identify potential haz-
ard points, we have used graphic illustrations in the
manual:
DANGER
This symbol indicates a danger to life.
You or other people could be seriously or fatally injured
if you fail to comply with this safety instruction.
WARNING
This symbol represents risk of injury and/or potentially
significant material damage.
You or other people could be seriously injured and/or
significant material damage could occur if you fail to
comply with this safety instruction.
CAUTION
This symbol represents potential minor injuries and/or
potential minor material damage.
You or other people could be slightly injured and/or mi-
nor material damage could occur if you fail to comply
with this safety instruction.
NOTE
This symbol is used with additional information
and instructions.
General Symbols
Fork direction
This symbols are used to show the direction of view in
a figure. The direction of the forks is used as reference:
22. SAFETY
General Safety Instructions
4
TSP6000
MA-1961
General Safety Instructions
Maintenance and Repair Instruc-
tions
DANGER
Observe the safety instructions in the maintenance
manual and the truck operator manual.
Failure to do so could result in serious or even fatal
injuries to maintenance and other personnel.
Motorised trucks can become hazardous if mainte-
nance and servicing work are neglected. For this rea-
son maintenance and inspections must be performed
at sufficiently short intervals. There must be suitably
trained personnel and proper guidelines at your place
of work.
Maintenance and Repair
• Always carry out work in accordance with the test
and maintenance schedule enclosed in these
maintenance instructions and any applicable serv-
ice bulletins.
• Only qualified and authorized personnel may carry
out work on the truck.
• Keep fire protection equipment at hand and do not
use a naked flame to check fluid levels or to test for
leaks.
• Use groundwater neutral, non-flammable solvents
for cleaning. Always perform cleaning work over an
oil separator. Protect the electrical system against
damp.
• Keep the work place and battery charging station
clean, dry and well ventilated.
• Do not allow oils to penetrate the ground or the
drain system. Used oil must be recycled correctly.
Oil filters and dehumidifying inserts must be
treated as special waste. Observe the local author-
ity regulations.
• Immediately neutralize and thoroughly rinse any
spilled battery fluid.
• Keep the truck clean. This will facilitate tracing
loose or faulty components.
• Maintain the legibility of the data capacity plate and
data plate, warning and instruction decals.
• Truck modifications and additions may only be per-
formed with Crown’s prior written approval.
• The reliability, safety and suitability of Crown trucks
can only be ensured by using original Crown parts.
Before Parking the Truck
• Brake until the truck comes to rest.
• Lower the fork carriage fully.
• Apply the parking brake.
• Switch off the truck and remove the key.
• When parking on a slope or incline always chock
all wheels.
Before Working on the Truck
• Jack up the truck so that the drive wheel is clear of
the ground. Apply the Emergency Disconnect and
disconnect the battery.
• Prevent the truck from rolling away and lowering.
• When working on the mast, fork carriage or lifting
mast always apply a chock to prevent accidental
lowering.
• Allow sufficient room for manoeuvre when testing
the truck, to avoid endangering yourself and other
people.
Before Starting the Truck
• Test the safety mechanisms.
• Get into the travel position.
• Test the lifting mechanism, travel direction switch,
speed control, steering, warning mechanism and
brakes.
23. SAFETY
General Safety Instructions
5
TSP6000 MA-1961
Warning and Instruction Decals on
the Truck
In the course of periodic maintenance work, check that
the warning and instruction decals on the truck are
complete and legible.
• Clean any dirty decals.
• Replace any faulty or missing decals.
A description and the location of the warning and in-
struction decals used on the truck are given in chapter
10.9 of the parts manual.
24. SAFETY
Control of Hazardous Energy
6
TSP6000
MA-1961
Control of Hazardous Energy
In the interest of safety Crown has developed guide-
lines for proper energy control when performing serv-
ice and maintenance on this truck.
Before performing any service or maintenance, re-
view the appropriate sections in this service man-
ual for additional procedures to be followed.
In addition, Crown recommends that all mechanics
wear appropriate protective items, such as safety
glasses, work gloves, and steel toed shoes, whenever
performing service or maintenance work on Crown
equipment.
Battery
Safety Rules
• Wear protective clothing, such as, rubber apron,
gloves, boots and full-face shield when performing
any maintenance on batteries. Do not allow elec-
trolyte to come in contact with eyes, skin, clothing
or floor. If electrolyte comes in contact with eyes,
flush immediately and thoroughly with clean water.
Obtain medical attention immediately. Should elec-
trolyte be spilled on skin, rinse promptly with clean
water and wash with soap. A baking soda solution
(one pound to one gallon of water) will neutralize
acid spilled on clothing, floor or any other surface.
Apply solution until bubbling stops and rinse with
clean water.
• Keep vent plugs firmly in place at all times except
when adding water or taking hydrometer readings.
• Do not bring any type of flame, spark, etc., near the
battery. Gas formed while the battery is charging,
is highly explosive. This gas remains in the cells
long after charging has stopped.
• Do not lay metallic or conductive objects on bat-
tery. Arcing will result.
• Do not allow dirt, cleaning solution or other foreign
material to enter cells. Impurities in electrolyte has
a neutralizing effect reducing available charge.
• If battery repair is planned, follow the battery man-
ufacturer's instructions concerning repair practices
and procedures.
Battery Care
CAUTION
Only qualified and experienced personnel should per-
form maintenance and repair on batteries.
• Make certain the charger being used matches the
voltage and amperage of the truck battery. This
voltage is listed on the truck serial plate.
• Before disconnecting or connecting batteries to a
charger, make sure the charger is “OFF”. If an at-
tempt is made to do this while the charger is “ON”,
serious injury to you, the battery and charger could
result.
• Never use a match or lighter. Battery fumes are ex-
plosive.
• Make certain battery used meets weight, size and
voltage requirements of truck (refer to serial plate).
NEVER operate truck with an undersized battery.
Charging
DANGER
Never smoke or bring flame near the battery. Gas
formed during charging is highly explosive and can
cause serious injury.
Consult the charger manufacturer’s manual covering
your charger for hints on operation and maintenance.
Battery Removal
CAUTION
• When removing the battery, move truck to area in-
tended for battery care. Floor must be level.
• Turn keyswitch or toggle switch to “OFF” position
and remove key.
• Disconnect battery and lockout or tagout truck as
described in Battery - Lockout/Tagout in this sec-
tion.
• Never move battery partially from truck without
roller stand in place.
• Lower load engaging means completely. If battery
is removed with load engaging means raised, use
hoist attached to mast to provide tip over protec-
tion.
25. SAFETY
Control of Hazardous Energy
7
TSP6000 MA-1961
• Don’t allow any metallic object to come in contact
with the top of the battery cells. This may cause a
short circuit when removing, transporting the bat-
tery.l
• Use an insulator (such as plywood) to cover the top
of the battery before and during removal.
Battery Installation
CAUTION
• When installing the battery, move truck to area in-
tended for battery care. Floor must be level.
• Turn keyswitch or toggle switch to “OFF” position
and remove key. Lockout or tagout truck as de-
scribed in Battery - Lockout/Tagout in this section.
• If battery was removed with load engaging means
raised, use hoist attached to mast to provide tip
over protection.
• Don’t allow any metallic object to come in contact
with the top of the battery cells. This may cause a
short circuit when transporting or installing the bat-
tery. Use an insulator (such as plywood) to cover
the top of the battery before and during installation.
CAUTION
Make certain same battery or battery of equal weight is
loaded into truck for truck stability. See nameplate for
minimum battery weight.
Lockout - Tagout
Always turn key switch to “OFF”, remove key and apply
tag to steering tiller with cable tie warning others truck
is being serviced.
When maintenance is to be performed and the battery
will be left in the truck, remove the main power fuses
and install a commercially available lockout device on
the battery connector.
When maintenance is performed and the battery is re-
moved from the truck, remove the main power fuses,
install a lockout device on the trucks battery connector
if possible, or if possible install a tag with a cable tie on
the trucks battery connector so it cannot be removed
easily warning that the truck is not available for opera-
tion.
8251
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. SAFETY
Control of Hazardous Energy
8
TSP6000
MA-1961
Brake
The brakes can be released through the use of the
Drive/Tow switch (DTS) during a maintenance situa-
tion.
When using this method to release the brakes, the
truck will not have brakes available for stopping. The
truck will not have traction control and the power steer-
ing system may not work.
DANGER
Extreme care must be taken when using the Drive/Tow
switch to release the brakes.
The truck will be free-wheeling and the brake pedal in
the operator compartment will have no effect on brak-
ing. Brakes will only be applied when DTS is moved
from the Tow to the Drive position.
• Lockout or tagout truck as described in Battery -
Lockout/Tagout in this section.
• Chock wheels or make sure truck is secured by
some means to keep it from free-wheeling.
• When towing the truck make sure all operators are
informed of the trucks lack of braking.
• Insert brake harness, PC407, to distribution panel.
• Connect battery. Move switch DTS from the Drive
position to the Tow position.
• Move truck to level area intended for maintenance.
• Move DTS from the Tow to the Drive position. Dis-
connect battery.
• Disconnect brake harness from distribution panel
and connect to original connection, CA407.
Capacitance
Due to capacitance voltage present in the traction mo-
tor controller and lift motor controller, whenever per-
forming maintenance which may permit contact with
the bus bars and associated power cables, discharge
the capacitors.
12721
1 Drive / Tow Switch (DTS)
2 Brake Harness PC407
1
2
12726
Acess 3®
28. SAFETY
Control of Hazardous Energy
9
TSP6000 MA-1961
• Move truck to a secure non traffic maintenance
area with a level floor.
• Lockout or tagout truck as described in Battery -
Lockout/Tagout in this section. However, it must be
sure that the truck is no longer supplied with bat-
tery voltage.
• Turn and hold the keyswitch to the “START” posi-
tion for 30 seconds.
• Turn key switch to “OFF”, remove key.
• Or allow 5 minutes after battery disconnect for ca-
pacitors to discharge.
Hydraulic
WARNING
AVOID HIGH PRESSURE FLUIDS—Escaping fluid
under pressure can penetrate the skin causing serious
injury. Relieve pressure before disconnecting hydraulic
lines. Tighten all connections before applying pres-
sure. Keep hands and body away from pin holes which
eject fluids under high pressure. Use a piece of card-
board or paper to search for leaks. Do not use your
hand.
Any fluid injected into the skin under high pressure
should be considered as a serious medical emergency
despite an initial normal appearance of the skin. There
is a delayed onset of pain, and serious tissue damage
may occur. Medical attention should be sought imme-
diately by a specialist who has had experience with this
type of injury.
Depressurizing the Hydraulic System
When maintenance is to be performed on the hydraulic
system, make certain the hydraulic system is not under
pressure:
• Move truck to a secure non traffic maintenance
area with a level floor.
• No load on forks.
• Completely lower load engaging means (mast) or,
if required for maintenance, block mast sections at
appropriate height as described in Mast of this sec-
tion.
• Lockout or tagout truck as described in Battery -
Lockout/Tagout in this section.
• Open power unit top, rear door and locate the man-
ual lowering valve on the right edge towards the
top of the power unit.
• Open the manual lowering valve to remove hy-
draulic pressure from the lift / lowering system.
• To depressurize the traverse System:
Keep in mind the warning about high pressure flu-
ids. Carefully loose the fitting at the sideshift hy-
draulic motor to relieve pressure.
12727
1 Handle for Manual Lowering Valve (MVL)
2 Manual Lowering Valve (MVL)
1
2